2.5.10.3.1 NetWkstaUserLogoffRequest

The fields in the NetWkstaUserLogoffRequest message MUST be set as follows.<56>

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
RAPOpcode																ParamDesc
...
...
...								DataDesc
RAPParams (42 bytes)
...
...
...

RAPOpcode (2 bytes): MUST be set to 0x0085. For more information, see section 2.5.1.

ParamDesc (11 bytes): MUST be set to "zzWb38WrLh". For more information, see section 2.5.1.

DataDesc (3 bytes): If the InfoLevel (below) is set to 0x0001, this MUST be set to "WDW". For more information, see section 2.5.1.

RAPParams (42 bytes): The RAPParams structure MUST have the following format.

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
Reserved																InfoLevel
WkstaUserLogoffBuffer (38 bytes)
...
...
...

Reserved (2 bytes): An unused, null-terminated ASCII string. SHOULD be set to zero when sent and MUST be ignored on receipt.

InfoLevel (2 bytes): A 16-bit unsigned integer that specifies the information level for the NetWkstaUserLogoffRequest.

WkstaUserLogoffBuffer (38 bytes): The buffer contains a NetWkstaUserLogoffRequestData.