Web PubSub client library for JavaScript

Article
04/24/2024

Azure Web PubSub is a cloud service that helps developers easily build real-time features in web applications with publish-subscribe patterns at scale.

Any scenario that requires real-time messaging between server and clients or among clients following publish-subscribe patterns can benefit from using Web PubSub. Developers no longer need to poll the server by sending repeated HTTP requests at intervals, which is wasteful and hard-to-scale.

As shown in the diagram below, your clients establish WebSocket connections with your Web PubSub resource. This client library:

simplifies managing client connections
simplifies sending messages among clients
automatically retries after unintended drops of client connection
reliably deliveries messages in number and in order after recovering from connection drops

overflow

Details about the terms used here are described in key concepts section.

This library is hosted on NPM.

Getting started

Currently supported environments

LTS versions of Node.js

Prerequisites

An Azure subscription
A Web PubSub resource

1. Install the `@azure/web-pubsub-client` package

npm install @azure/web-pubsub-client

2. Connect with your Web PubSub resource

A client uses a Client Access URL to connect and authenticate with the service, which follows a pattern of wss://<service_name>.webpubsub.azure.com/client/hubs/<hub_name>?access_token=<token>. A client can have a few ways to obtain the Client Access URL. For this quick start, you can copy and paste one from Azure Portal shown below. (For production, your clients usually get the Client Access URL genegrated on your application server. See details below )

get_client_url

As shown in the diagram above, the client has the permissions to send messages to and join a specific group named "group1".

// Imports the client libray
const { WebPubSubClient } = require("@azure/web-pubsub-client");

// Instantiates the client object
const client = new WebPubSubClient("<client-access-url>");

// Starts the client connection with your Web PubSub resource
await client.start();

// ...
// The client can join/leave groups, send/receive messages to and from those groups all in real-time

3. Join groups

Note that a client can only receive messages from groups that it has joined and you need to add a callback to specify the logic when receiving messages.

// ...continues the code snippet from above

// Specifies the group to join
let groupName = "group1";

// Registers a listener for the event 'group-message' early before joining a group to not miss messages
client.on("group-message", (e) => {
  console.log(`Received message: ${e.message.data}`);
});

// A client needs to join the group it wishes to receive messages from
await client.joinGroup(groupName);

4. Send messages to a group

// ...continues the code snippet from above

// Send a message to a joined group
await client.sendToGroup(groupName, "hello world", "text");

// In the Console tab of your developer tools found in your browser, you should see the message printed there.

Examples

Add callbacks for connected, disconnected and stopped events

When a client is successfully connected to your Web PubSub resource, the connected event is triggered.

client.on("connected", (e) => {
  console.log(`Connection ${e.connectionId} is connected.`);
});

When a client is disconnected and fails to recover the connection, the disconnected event is triggered.

client.on("disconnected", (e) => {
  console.log(`Connection disconnected: ${e.message}`);
});

The stopped event will be triggered when the client is disconnected and the client stops trying to reconnect. This usually happens after the client.stop() is called, or autoReconnect is disabled or a specified limit to trying to reconnect has reached. If you want to restart the client, you can call client.start() in the stopped event.

// Registers a listener for the "stopped" event
client.on("stopped", () => {
  console.log(`Client has stopped`);
});

Use a negotiation server to generate Client Access URL programatically

In production, clients usually fetch the Client Access URL from an application server. The server holds the connection string to your Web PubSub resource and generates the Client Access URL with the help from the server library @azure/web-pubsub.

1. Application server

The code snippet below is an example of an application server exposes a /negotiate path and returns the Client Access URL.

// This code snippet uses the popular Express framework
const express = require('express');
const app = express();
const port = 8080;

// Imports the server library, which is different from the client library
const { WebPubSubServiceClient } = require('@azure/web-pubsub');
const hubName = 'sample_chat';

const serviceClient = new WebPubSubServiceClient("<web-pubsub-connectionstring>", hubName);

// Note that the token allows the client to join and send messages to any groups. It is specified with the "roles" option.
app.get('/negotiate', async (req, res) => {
  let token = await serviceClient.getClientAccessToken({roles: ["webpubsub.joinLeaveGroup", "webpubsub.sendToGroup"] });
  res.json({
    url: token.url
  });
});

app.listen(port, () => console.log(`Application server listening at http://localhost:${port}/negotiate`));

2. Client side

The code snippet below is an example of the client side.

const { WebPubSubClient } = require("@azure/web-pubsub-client")

const client = new WebPubSubClient({
  getClientAccessUrl: async () => {
    let value = await (await fetch(`/negotiate`)).json();
    return value.url;
  }
});

await client.start();

To see the full code of this sample, please refer to samples-browser.

A client consumes messages from the application server or joined groups

A client can add callbacks to consume messages from your application server or groups. Please note, for group-message event the client can only receive group messages that it has joined.

// Registers a listener for the "server-message". The callback will be invoked when your application server sends message to the connectionID, to or broadcast to all connections.
client.on("server-message", (e) => {
  console.log(`Received message ${e.message.data}`);
});

// Registers a listener for the "group-message". The callback will be invoked when the client receives a message from the groups it has joined.
client.on("group-message", (e) => {
    console.log(`Received message from ${e.message.group}: ${e.message.data}`);
});

Handle rejoin failure

When a client is disconnected and fails to recover, all group contexts will be cleaned up in your Web PubSub resource. This means when the client reconnects, it needs to rejoin groups. By default, the client has autoRejoinGroup option enabled.

However, you should be aware of autoRejoinGroup's limitations.

The client can only rejoin groups that it's originally joined by the client code not by the server side code.
"rejoin group" operations may fail due to various reasons, e.g. the client doesn't have permission to join the groups. In such cases, you need to add a callback to handle this failure.

// By default autoRejoinGroups=true. You can disable it by setting to false.
const client = new WebPubSubClient("<client-access-url>", { autoRejoinGroups: true });

// Registers a listener to handle "rejoin-group-failed" event
client.on("rejoin-group-failed", e => {
  console.log(`Rejoin group ${e.group} failed: ${e.error}`);
})

Operation and retry

By default, the operation such as client.joinGroup(), client.leaveGroup(), client.sendToGroup(), client.sendEvent() has three retries. You can configure through the messageRetryOptions. If all retries have failed, an error will be thrown. You can keep retrying by passing in the same ackId as previous retries so that the Web PubSub service can deduplicate the operation.

try {
  await client.joinGroup(groupName);
} catch (err) {
  let id = null;
  if (err instanceof SendMessageError) {
    id = err.ackId;
  }
  await client.joinGroup(groupName, {ackId: id});
}

Specify subprotocol

You can change the subprotocol to be used by the client. By default, the client uses json.reliable.webpubsub.azure.v1. You can choose to use json.reliable.webpubsub.azure.v1 or json.webpubsub.azure.v1.

// Change to use json.webpubsub.azure.v1
const client = new WebPubSubClient("<client-access-url>", { protocol: WebPubSubJsonProtocol() });

// Change to use json.reliable.webpubsub.azure.v1
const client = new WebPubSubClient("<client-access-url>", { protocol: WebPubSubJsonReliableProtocol() });

Key concepts

Connection

A connection, also known as a client or a client connection, represents an individual WebSocket connection connected to the Web PubSub. When successfully connected, a unique connection ID is assigned to this connection by the Web PubSub. Each WebPubSubClient creates its own exclusive connection.

Recovery

If a client using reliable protocols disconnects, a new WebSocket tries to establish using the connection ID of the lost connection. If the new WebSocket connection is successfully connected, the connection is recovered. Throughout the time a client is disconnected, the service retains the client's context as well as all messages that the client was subscribed to, and when the client recovers, the service will send these messages to the client. If the service returns WebSocket error code 1008 or the recovery attempt lasts more than 30 seconds, the recovery fails.

Reconnect

Reconnection happens when the client connection drops and fails to recover. Reconnection starts a new connection and the new connection has a new connection ID. Unlike recovery, the service treats the reconnected client as a new client connection. The client connection needs to rejoin groups. By default, the client library rejoins groups after reconnection.

Hub

A hub is a logical concept for a set of client connections. Usually, you use one hub for one purpose, for example, a chat hub, or a notification hub. When a client connection is created, it connects to a hub, and during its lifetime, it belongs to that hub. Different applications can share one Web PubSub by using different hub names.

Group

A group is a subset of connections to the hub. You can add a client connection to a group, or remove the client connection from the group, anytime you want. For example, when a client joins a chat room, or when a client leaves the chat room, this chat room can be considered to be a group. A client can join multiple groups, and a group can contain multiple clients.

User

Connections to Web PubSub can belong to one user. A user might have multiple connections, for example when a single user is connected across multiple devices or multiple browser tabs.

Client Lifetime

Each of the Web PubSub clients is safe to cache and be used as a singleton for the lifetime of the application. The registered event callbacks share the same lifetime with the client. This means you can add or remove callbacks at any time and the registration status will not change after reconnection or the client being stopped.

JavaScript Bundle

To use this client library in the browser, first, you need to use a bundler. For details on how to do this, please refer to our bundling documentation.

Troubleshooting

Enable logs

You can set the following environment variable to get the debug logs when using this library.

export AZURE_LOG_LEVEL=verbose

For more detailed instructions on how to enable logs, you can look at the @azure/logger package docs.

Live Trace

Use Live Trace tool from Web PubSub portal to view the live traffic.

Additional resources

Learn more about client permission, see permissions
Server SDK - JavaScript documentation
Product documentation
Samples

Contributing

If you'd like to contribute to this library, please read the contributing guide to learn more about how to build and test the code.

Share via

Web PubSub client library for JavaScript

Getting started

Currently supported environments

Prerequisites

1. Install the @azure/web-pubsub-client package

2. Connect with your Web PubSub resource

3. Join groups

4. Send messages to a group

Examples

Add callbacks for connected, disconnected and stopped events

Use a negotiation server to generate Client Access URL programatically

1. Application server

2. Client side

A client consumes messages from the application server or joined groups

Handle rejoin failure

Operation and retry

Specify subprotocol

Key concepts

Connection

Recovery

Reconnect

Hub

Group

User

Client Lifetime

JavaScript Bundle

Troubleshooting

Enable logs

Live Trace

Additional resources

Contributing

Additional resources

1. Install the `@azure/web-pubsub-client` package