Working with property values

Article
02/16/2021

For the most part Entity Framework will take care of tracking the state, original values, and current values of the properties of your entity instances. However, there may be some cases - such as disconnected scenarios - where you want to view or manipulate the information EF has about the properties. The techniques shown in this topic apply equally to models created with Code First and the EF Designer.

Entity Framework keeps track of two values for each property of a tracked entity. The current value is, as the name indicates, the current value of the property in the entity. The original value is the value that the property had when the entity was queried from the database or attached to the context.

There are two general mechanisms for working with property values:

The value of a single property can be obtained in a strongly typed way using the Property method.
Values for all properties of an entity can be read into a DbPropertyValues object. DbPropertyValues then acts as a dictionary-like object to allow property values to be read and set. The values in a DbPropertyValues object can be set from values in another DbPropertyValues object or from values in some other object, such as another copy of the entity or a simple data transfer object (DTO).

The sections below show examples of using both of the above mechanisms.

Getting and setting the current or original value of an individual property

The example below shows how the current value of a property can be read and then set to a new value:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(3);

    // Read the current value of the Name property
    string currentName1 = context.Entry(blog).Property(u => u.Name).CurrentValue;

    // Set the Name property to a new value
    context.Entry(blog).Property(u => u.Name).CurrentValue = "My Fancy Blog";

    // Read the current value of the Name property using a string for the property name
    object currentName2 = context.Entry(blog).Property("Name").CurrentValue;

    // Set the Name property to a new value using a string for the property name
    context.Entry(blog).Property("Name").CurrentValue = "My Boring Blog";
}

Use the OriginalValue property instead of the CurrentValue property to read or set the original value.

Note that the returned value is typed as “object” when a string is used to specify the property name. On the other hand, the returned value is strongly typed if a lambda expression is used.

Setting the property value like this will only mark the property as modified if the new value is different from the old value.

When a property value is set in this way the change is automatically detected even if AutoDetectChanges is turned off.

Getting and setting the current value of an unmapped property

The current value of a property that is not mapped to the database can also be read. An example of an unmapped property could be an RssLink property on Blog. This value may be calculated based on the BlogId, and therefore doesn't need to be stored in the database. For example:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);
    // Read the current value of an unmapped property
    var rssLink = context.Entry(blog).Property(p => p.RssLink).CurrentValue;

    // Use a string to specify the property name
    var rssLinkAgain = context.Entry(blog).Property("RssLink").CurrentValue;
}

The current value can also be set if the property exposes a setter.

Reading the values of unmapped properties is useful when performing Entity Framework validation of unmapped properties. For the same reason current values can be read and set for properties of entities that are not currently being tracked by the context. For example:

using (var context = new BloggingContext())
{
    // Create an entity that is not being tracked
    var blog = new Blog { Name = "ADO.NET Blog" };

    // Read and set the current value of Name as before
    var currentName1 = context.Entry(blog).Property(u => u.Name).CurrentValue;
    context.Entry(blog).Property(u => u.Name).CurrentValue = "My Fancy Blog";
    var currentName2 = context.Entry(blog).Property("Name").CurrentValue;
    context.Entry(blog).Property("Name").CurrentValue = "My Boring Blog";
}

Note that original values are not available for unmapped properties or for properties of entities that are not being tracked by the context.

Checking whether a property is marked as modified

The example below shows how to check whether or not an individual property is marked as modified:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);

    var nameIsModified1 = context.Entry(blog).Property(u => u.Name).IsModified;

    // Use a string for the property name
    var nameIsModified2 = context.Entry(blog).Property("Name").IsModified;
}

The values of modified properties are sent as updates to the database when SaveChanges is called.

Marking a property as modified

The example below shows how to force an individual property to be marked as modified:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);

    context.Entry(blog).Property(u => u.Name).IsModified = true;

    // Use a string for the property name
    context.Entry(blog).Property("Name").IsModified = true;
}

Marking a property as modified forces an update to be send to the database for the property when SaveChanges is called even if the current value of the property is the same as its original value.

It is not currently possible to reset an individual property to be not modified after it has been marked as modified. This is something we plan to support in a future release.

Reading current, original, and database values for all properties of an entity

The example below shows how to read the current values, the original values, and the values actually in the database for all mapped properties of an entity.

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);

    // Make a modification to Name in the tracked entity
    blog.Name = "My Cool Blog";

    // Make a modification to Name in the database
    context.Database.SqlCommand("update dbo.Blogs set Name = 'My Boring Blog' where Id = 1");

    // Print out current, original, and database values
    Console.WriteLine("Current values:");
    PrintValues(context.Entry(blog).CurrentValues);

    Console.WriteLine("\nOriginal values:");
    PrintValues(context.Entry(blog).OriginalValues);

    Console.WriteLine("\nDatabase values:");
    PrintValues(context.Entry(blog).GetDatabaseValues());
}

public static void PrintValues(DbPropertyValues values)
{
    foreach (var propertyName in values.PropertyNames)
    {
        Console.WriteLine("Property {0} has value {1}",
                          propertyName, values[propertyName]);
    }
}

The current values are the values that the properties of the entity currently contain. The original values are the values that were read from the database when the entity was queried. The database values are the values as they are currently stored in the database. Getting the database values is useful when the values in the database may have changed since the entity was queried such as when a concurrent edit to the database has been made by another user.

Setting current or original values from another object

The current or original values of a tracked entity can be updated by copying values from another object. For example:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);
    var coolBlog = new Blog { Id = 1, Name = "My Cool Blog" };
    var boringBlog = new BlogDto { Id = 1, Name = "My Boring Blog" };

    // Change the current and original values by copying the values from other objects
    var entry = context.Entry(blog);
    entry.CurrentValues.SetValues(coolBlog);
    entry.OriginalValues.SetValues(boringBlog);

    // Print out current and original values
    Console.WriteLine("Current values:");
    PrintValues(entry.CurrentValues);

    Console.WriteLine("\nOriginal values:");
    PrintValues(entry.OriginalValues);
}

public class BlogDto
{
    public int Id { get; set; }
    public string Name { get; set; }
}

Running the code above will print out:

Current values:
Property Id has value 1
Property Name has value My Cool Blog

Original values:
Property Id has value 1
Property Name has value My Boring Blog

This technique is sometimes used when updating an entity with values obtained from a service call or a client in an n-tier application. Note that the object used does not have to be of the same type as the entity so long as it has properties whose names match those of the entity. In the example above, an instance of BlogDTO is used to update the original values.

Note that only properties that are set to different values when copied from the other object will be marked as modified.

Setting current or original values from a dictionary

The current or original values of a tracked entity can be updated by copying values from a dictionary or some other data structure. For example:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);

    var newValues = new Dictionary<string, object>
    {
        { "Name", "The New ADO.NET Blog" },
        { "Url", "blogs.msdn.com/adonet" },
    };

    var currentValues = context.Entry(blog).CurrentValues;

    foreach (var propertyName in newValues.Keys)
    {
        currentValues[propertyName] = newValues[propertyName];
    }

    PrintValues(currentValues);
}

Use the OriginalValues property instead of the CurrentValues property to set original values.

Setting current or original values from a dictionary using Property

An alternative to using CurrentValues or OriginalValues as shown above is to use the Property method to set the value of each property. This can be preferable when you need to set the values of complex properties. For example:

using (var context = new BloggingContext())
{
    var user = context.Users.Find("johndoe1987");

    var newValues = new Dictionary<string, object>
    {
        { "Name", "John Doe" },
        { "Location.City", "Redmond" },
        { "Location.State.Name", "Washington" },
        { "Location.State.Code", "WA" },
    };

    var entry = context.Entry(user);

    foreach (var propertyName in newValues.Keys)
    {
        entry.Property(propertyName).CurrentValue = newValues[propertyName];
    }
}

In the example above complex properties are accessed using dotted names. For other ways to access complex properties see the two sections later in this topic specifically about complex properties.

Creating a cloned object containing current, original, or database values

The DbPropertyValues object returned from CurrentValues, OriginalValues, or GetDatabaseValues can be used to create a clone of the entity. This clone will contain the property values from the DbPropertyValues object used to create it. For example:

using (var context = new BloggingContext())
{
    var blog = context.Blogs.Find(1);

    var clonedBlog = context.Entry(blog).GetDatabaseValues().ToObject();
}

Note that the object returned is not the entity and is not being tracked by the context. The returned object also does not have any relationships set to other objects.

The cloned object can be useful for resolving issues related to concurrent updates to the database, especially where a UI that involves data binding to objects of a certain type is being used.

Getting and setting the current or original values of complex properties

The value of an entire complex object can be read and set using the Property method just as it can be for a primitive property. In addition you can drill down into the complex object and read or set properties of that object, or even a nested object. Here are some examples:

using (var context = new BloggingContext())
{
    var user = context.Users.Find("johndoe1987");

    // Get the Location complex object
    var location = context.Entry(user)
                       .Property(u => u.Location)
                       .CurrentValue;

    // Get the nested State complex object using chained calls
    var state1 = context.Entry(user)
                     .ComplexProperty(u => u.Location)
                     .Property(l => l.State)
                     .CurrentValue;

    // Get the nested State complex object using a single lambda expression
    var state2 = context.Entry(user)
                     .Property(u => u.Location.State)
                     .CurrentValue;

    // Get the nested State complex object using a dotted string
    var state3 = context.Entry(user)
                     .Property("Location.State")
                     .CurrentValue;

    // Get the value of the Name property on the nested State complex object using chained calls
    var name1 = context.Entry(user)
                       .ComplexProperty(u => u.Location)
                       .ComplexProperty(l => l.State)
                       .Property(s => s.Name)
                       .CurrentValue;

    // Get the value of the Name property on the nested State complex object using a single lambda expression
    var name2 = context.Entry(user)
                       .Property(u => u.Location.State.Name)
                       .CurrentValue;

    // Get the value of the Name property on the nested State complex object using a dotted string
    var name3 = context.Entry(user)
                       .Property("Location.State.Name")
                       .CurrentValue;
}

Use the OriginalValue property instead of the CurrentValue property to get or set an original value.

Note that either the Property or the ComplexProperty method can be used to access a complex property. However, the ComplexProperty method must be used if you wish to drill down into the complex object with additional Property or ComplexProperty calls.

Using DbPropertyValues to access complex properties

When you use CurrentValues, OriginalValues, or GetDatabaseValues to get all the current, original, or database values for an entity, the values of any complex properties are returned as nested DbPropertyValues objects. These nested objects can then be used to get values of the complex object. For example, the following method will print out the values of all properties, including values of any complex properties and nested complex properties.

public static void WritePropertyValues(string parentPropertyName, DbPropertyValues propertyValues)
{
    foreach (var propertyName in propertyValues.PropertyNames)
    {
        var nestedValues = propertyValues[propertyName] as DbPropertyValues;
        if (nestedValues != null)
        {
            WritePropertyValues(parentPropertyName + propertyName + ".", nestedValues);
        }
        else
        {
            Console.WriteLine("Property {0}{1} has value {2}",
                              parentPropertyName, propertyName,
                              propertyValues[propertyName]);
        }
    }
}

To print out all current property values the method would be called like this:

using (var context = new BloggingContext())
{
    var user = context.Users.Find("johndoe1987");

    WritePropertyValues("", context.Entry(user).CurrentValues);
}

Share via