Share via

az networkfabric l3domain

  • Reference

Note

This reference is part of the managednetworkfabric extension for the Azure CLI (version 2.49.0 or higher). The extension will automatically install the first time you run an az networkfabric l3domain command. Learn more about extensions.

Manage L3 Isolation Domain Resource.

Commands

Name Description Type Status
az networkfabric l3domain create

Create a L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain delete

Delete the L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain list

List all L3 Isolation Domains in the provided resource group or subscription.

 Extension GA
az networkfabric l3domain show

Show details of the provided L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain update

Update to update certain properties of the L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain update-admin-state

Enables racks for this Isolation Domain.

 Extension GA
az networkfabric l3domain wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az networkfabric l3domain create

Create a L3 Isolation Domain resource.

az networkfabric l3domain create --nf-id
                                 --resource-group
                                 --resource-name
                                 [--aggregate-route-configuration]
                                 [--annotation]
                                 [--connected-subnet-route-policy]
                                 [--location]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--redistribute-connected-subnets {False, True}]
                                 [--redistribute-static-routes {False, True}]
                                 [--tags]

Examples

Create a L3 Isolation Domain

az networkfabric l3domain create --resource-group "example-rg" --resource-name "example-l3domain" --location "westus3" --nf-id "/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.ManagedNetworkFabric/networkFabrics/example-fabricName" --redistribute-connected-subnets "True" --redistribute-static-routes "True" --aggregate-route-configuration "{ipv4Routes:[{prefix:'10.0.0.1/28'},{prefix:'10.0.0.2/28'}],ipv6Routes:[{prefix:'2fff::/64'},{prefix:'2fff::/65'}]}" --connected-subnet-route-policy "{exportRoutePolicy:{exportIpv4RoutePolicyId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/microsoft.managednetworkfabric/routePolicies/example-routepolicy'}}"

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric l3domain create --connected-subnet-route-policy "??"

Required Parameters

--nf-id

ARM Resource ID of the Network Fabric.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

Optional Parameters

--aggregate-route-configuration

Aggregate route configurations. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--annotation

Description for underlying resource.

--connected-subnet-route-policy

Connected Subnet RoutePolicy. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--location -l

Location of Azure region When not specified, the location of the resource group will be used.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--redistribute-connected-subnets

Advertise Connected Subnets. Default value is True. Example: True.

Accepted values: False, True
--redistribute-static-routes

Advertise Static Routes. Default value is False. Example: True.

Accepted values: False, True
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain delete

Delete the L3 Isolation Domain resource.

az networkfabric l3domain delete [--ids]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]

Examples

Delete the L3 Isolation Domain

az networkfabric l3domain delete --resource-group "example-rg" --resource-name "example-l3domain"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain list

List all L3 Isolation Domains in the provided resource group or subscription.

az networkfabric l3domain list [--resource-group]

Examples

List the L3 Isolation Domains for Resource Group

az networkfabric l3domain list --resource-group "example-rg"

List the L3 Isolation Domains for Subscription

az networkfabric l3domain list --subscription "<subscriptionId>"

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain show

Show details of the provided L3 Isolation Domain resource.

az networkfabric l3domain show [--ids]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]

Examples

Show the L3 Isolation Domain

az networkfabric l3domain show --resource-group "example-rg" --resource-name "example-l3domain"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain update

Update to update certain properties of the L3 Isolation Domain resource.

az networkfabric l3domain update [--aggregate-route-configuration]
                                 [--annotation]
                                 [--connected-subnet-route-policy]
                                 [--ids]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--redistribute-connected-subnets {False, True}]
                                 [--redistribute-static-routes {False, True}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]
                                 [--tags]

Examples

Update the L3 Isolation Domain

az networkfabric l3domain update --resource-group "example-rg" --resource-name "example-l3domain" --redistribute-connected-subnets "True" --redistribute-static-routes "True" --aggregate-route-configuration "{ipv4Routes:[{prefix:'10.0.0.1/28'},{prefix:'10.0.0.2/28'}],ipv6Routes:[{prefix:'2fff::/64'},{prefix:'2fff::/65'}]}" --connected-subnet-route-policy "{exportRoutePolicy:{exportIpv4RoutePolicyId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/microsoft.managednetworkfabric/routePolicies/example-routepolicy'}}"

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric l3domain update --connected-subnet-route-policy "??"

Optional Parameters

--aggregate-route-configuration

Aggregate route configurations. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--annotation

Description for underlying resource.

--connected-subnet-route-policy

Connected Subnet RoutePolicy. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--redistribute-connected-subnets

Advertise Connected Subnets. Default value is True. Example: True.

Accepted values: False, True
--redistribute-static-routes

Advertise Static Routes. Default value is False. Example: True.

Accepted values: False, True
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Resource tags Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain update-admin-state

Enables racks for this Isolation Domain.

az networkfabric l3domain update-admin-state [--ids]
                                             [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                             [--resource-group]
                                             [--resource-ids]
                                             [--resource-name]
                                             [--state {Disable, Enable}]
                                             [--subscription]

Examples

Update admin state of L3 Isolation Domain

az networkfabric l3domain update-admin-state --resource-group "example-rg" --resource-name "example-l3domain" --state "Enable"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-ids

Network Fabrics or Network Rack resource Id. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--resource-name

Name of the L3 Isolation Domain.

--state

Administrative state.

Accepted values: Disable, Enable
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkfabric l3domain wait

Place the CLI in a waiting state until a condition is met.

az networkfabric l3domain wait [--created]
                               [--custom]
                               [--deleted]
                               [--exists]
                               [--ids]
                               [--interval]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]
                               [--timeout]
                               [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.