Share via


az networkcloud l3network

Note

This reference is part of the networkcloud extension for the Azure CLI (version 2.61.0 or higher). The extension will automatically install the first time you run an az networkcloud l3network command. Learn more about extensions.

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Manage layer 3 (l3) network.

Commands

Name Description Type Status
az networkcloud l3network create

Create a new layer 3 (L3) network or update the properties of the existing network.

Extension Preview
az networkcloud l3network delete

Delete the provided layer 3 (L3) network.

Extension Preview
az networkcloud l3network list

List layer 3 (L3) networks in the provided resource group or subscription.

Extension Preview
az networkcloud l3network show

Get properties of the provided layer 3 (L3) network.

Extension Preview
az networkcloud l3network update

Update tags associated with the provided layer 3 (L3) network.

Extension Preview
az networkcloud l3network wait

Place the CLI in a waiting state until a condition is met.

Extension Preview

az networkcloud l3network create

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Create a new layer 3 (L3) network or update the properties of the existing network.

az networkcloud l3network create --extended-location
                                 --l3-isolation-domain-id
                                 --l3-network-name
                                 --resource-group
                                 --vlan
                                 [--interface-name]
                                 [--ip-allocation-type {DualStack, IPV4, IPV6}]
                                 [--ipv4-connected-prefix]
                                 [--ipv6-connected-prefix]
                                 [--location]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--tags]

Examples

Create or update L3 network

az networkcloud l3network create --name "l3NetworkName" --extended-location name="/subscriptions/subscriptionId/resourceGroups/resourceGroupName/providers/Microsoft.ExtendedLocation/customLocations/clusterExtendedLocationName" type="CustomLocation" --location "location"  --interface-name "eth0" --ip-allocation-type "DualStack" --ipv4-connected-prefix "198.51.100.0/24" --ipv6-connected-prefix "2001:db8::/64" --l3-isolation-domain-id "/subscriptions/subscriptionId/resourceGroups/resourceGroupName/providers/Microsoft.ManagedNetworkFabric/l3IsolationDomains/l3IsolationDomainName" --vlan 12 --tags key1="myvalue1" key2="myvalue2" --resource-group "resourceGroupName"

Required Parameters

--extended-location

The extended location of the cluster associated with the resource. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--l3-isolation-domain-id

The resource ID of the Network Fabric l3IsolationDomain.

--l3-network-name --name -n

The name of the L3 network.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--vlan

The VLAN from the l3IsolationDomain that is used for this network.

Optional Parameters

--interface-name

The default interface name for this L3 network in the virtual machine. This name can be overridden by the name supplied in the network attachment configuration of that virtual machine.

--ip-allocation-type

The type of the IP address allocation, defaulted to "DualStack".

Accepted values: DualStack, IPV4, IPV6
Default value: DualStack
--ipv4-connected-prefix

The IPV4 prefix (CIDR) assigned to this L3 network. Required when the IP allocation type is IPV4 or DualStack.

--ipv6-connected-prefix

The IPV6 prefix (CIDR) assigned to this L3 network. Required when the IP allocation type is IPV6 or DualStack.

--location -l

The geo-location where the resource lives When not specified, the location of the resource group will be used.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkcloud l3network delete

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Delete the provided layer 3 (L3) network.

az networkcloud l3network delete [--ids]
                                 [--l3-network-name]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--subscription]
                                 [--yes]

Examples

Delete L3 network

az networkcloud l3network delete --name "l3NetworkName" --resource-group "resourceGroupName"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--l3-network-name --name -n

The name of the L3 network.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkcloud l3network list

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

List layer 3 (L3) networks in the provided resource group or subscription.

az networkcloud l3network list [--max-items]
                               [--next-token]
                               [--resource-group]

Examples

List L3 networks for subscription

az networkcloud l3network list

List L3networks for resource group

az networkcloud l3network list --resource-group "resourcegroupname"

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkcloud l3network show

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Get properties of the provided layer 3 (L3) network.

az networkcloud l3network show [--ids]
                               [--l3-network-name]
                               [--resource-group]
                               [--subscription]

Examples

Get L3 network

az networkcloud l3network show --name "l2NetworkName" --resource-group "resourceGroupName"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--l3-network-name --name -n

The name of the L3 network.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkcloud l3network update

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Update tags associated with the provided layer 3 (L3) network.

az networkcloud l3network update [--ids]
                                 [--l3-network-name]
                                 [--resource-group]
                                 [--subscription]
                                 [--tags]

Examples

Update tags for L3 network

az networkcloud l3network update --name "l3NetworkName" --tags key1="myvalue1" key2="myvalue2" --resource-group "resourceGroupName"

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--l3-network-name --name -n

The name of the L3 network.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

The Azure resource tags that will replace the existing ones. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az networkcloud l3network wait

Preview

Command group 'az networkcloud' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Place the CLI in a waiting state until a condition is met.

az networkcloud l3network wait [--created]
                               [--custom]
                               [--deleted]
                               [--exists]
                               [--ids]
                               [--interval]
                               [--l3-network-name]
                               [--resource-group]
                               [--subscription]
                               [--timeout]
                               [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--l3-network-name --name -n

The name of the L3 network.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.