Share via

az devcenter admin environment-type

  • Reference

Note

This reference is part of the devcenter extension for the Azure CLI (version 2.51.0 or higher). The extension will automatically install the first time you run an az devcenter admin environment-type command. Learn more about extensions.

Manage environment types.

Commands

Name Description Type Status
az devcenter admin environment-type create

Create an environment type.

 Extension GA
az devcenter admin environment-type delete

Delete an environment type.

 Extension GA
az devcenter admin environment-type list

List environment types for the devcenter.

 Extension GA
az devcenter admin environment-type show

Get an environment type.

 Extension GA
az devcenter admin environment-type update

Update an environment type.

 Extension GA

az devcenter admin environment-type create

Create an environment type.

az devcenter admin environment-type create --dev-center
                                           --environment-type-name
                                           --resource-group
                                           [--display-name]
                                           [--tags]

Examples

Create

az devcenter admin environment-type create --tags Owner="superuser" --dev-center-name "Contoso" --name "DevTest" --resource-group "rg1"

Required Parameters

--dev-center --dev-center-name -d

The name of the dev center. Use az configure -d dev-center=<dev_center_name> to configure a default.

--environment-type-name --name -n

The name of the environment type.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--display-name

The display name of the environment type.

--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az devcenter admin environment-type delete

Delete an environment type.

az devcenter admin environment-type delete [--dev-center]
                                           [--environment-type-name]
                                           [--ids]
                                           [--resource-group]
                                           [--subscription]
                                           [--yes]

Examples

Delete

az devcenter admin environment-type delete --dev-center-name "Contoso" --name "DevTest" --resource-group "rg1"

Optional Parameters

--dev-center --dev-center-name -d

The name of the dev center. Use az configure -d dev-center=<dev_center_name> to configure a default.

--environment-type-name --name -n

The name of the environment type.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az devcenter admin environment-type list

List environment types for the devcenter.

az devcenter admin environment-type list --dev-center
                                         --resource-group
                                         [--max-items]
                                         [--next-token]

Examples

List

az devcenter admin environment-type list --dev-center-name "Contoso" --resource-group "rg1"

Required Parameters

--dev-center --dev-center-name -d

The name of the dev center. Use az configure -d dev-center=<dev_center_name> to configure a default.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az devcenter admin environment-type show

Get an environment type.

az devcenter admin environment-type show [--dev-center]
                                         [--environment-type-name]
                                         [--ids]
                                         [--resource-group]
                                         [--subscription]

Examples

Get

az devcenter admin environment-type show --dev-center-name "Contoso" --name "DevTest" --resource-group "rg1"

Optional Parameters

--dev-center --dev-center-name -d

The name of the dev center. Use az configure -d dev-center=<dev_center_name> to configure a default.

--environment-type-name --name -n

The name of the environment type.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az devcenter admin environment-type update

Update an environment type.

az devcenter admin environment-type update [--add]
                                           [--dev-center]
                                           [--display-name]
                                           [--environment-type-name]
                                           [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                           [--ids]
                                           [--remove]
                                           [--resource-group]
                                           [--set]
                                           [--subscription]
                                           [--tags]

Examples

Update

az devcenter admin environment-type update --tags Owner="superuser" --dev-center-name "Contoso" --name "DevTest" --resource-group "rg1"

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--dev-center --dev-center-name -d

The name of the dev center. Use az configure -d dev-center=<dev_center_name> to configure a default.

--display-name

The display name of the environment type.

--environment-type-name --name -n

The name of the environment type.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.