The Lasv3-series of Azure Virtual Machines (Azure VMs) features high-throughput, low latency, directly mapped local NVMe storage. These VMs run on an AMD 3rd Generation EPYC™ 7763v processor in a multi-threaded configuration with an L3 cache of up to 256 MB that can achieve a boosted maximum frequency of 3.5 GHz. The Lasv3-series VMs are available in sizes from 8 to 80 vCPUs in a simultaneous multi-threading configuration. There are 8 GiB of memory per vCPU, and one 1.92 TB NVMe SSD device per 8 vCPUs, with up to 19.2 TB (10x1.92TB) available on the L80as_v3 size.
Note
The Lasv3-series VMs are optimized to use the local disk on the node attached directly to the VM rather than using durable data disks. This method allows for greater IOPS and throughput for your workloads. The Lsv3, Lasv3, Lsv2, and Ls-series don't support the creation of a local cache to increase the IOPS achievable by durable data disks.
The high throughput and IOPS of the local disk makes the Lasv3-series VMs ideal for NoSQL stores such as Apache Cassandra and MongoDB. These stores replicate data across multiple VMs to achieve persistence in the event of the failure of a single VM.
1Temp disk speed often differs between RR (Random Read) and RW (Random Write) operations. RR operations are typically faster than RW operations. The RW speed is usually slower than the RR speed on series where only the RR speed value is listed.
Storage capacity is shown in units of GiB or 1024^3 bytes. When you compare disks measured in GB (1000^3 bytes) to disks measured in GiB (1024^3) remember that capacity numbers given in GiB may appear smaller. For example, 1023 GiB = 1098.4 GB.
Disk throughput is measured in input/output operations per second (IOPS) and MBps where MBps = 10^6 bytes/sec.
Storage capacity is shown in units of GiB or 1024^3 bytes. When you compare disks measured in GB (1000^3 bytes) to disks measured in GiB (1024^3) remember that capacity numbers given in GiB may appear smaller. For example, 1023 GiB = 1098.4 GB.
Disk throughput is measured in input/output operations per second (IOPS) and MBps where MBps = 10^6 bytes/sec.
Data disks can operate in cached or uncached modes. For cached data disk operation, the host cache mode is set to ReadOnly or ReadWrite. For uncached data disk operation, the host cache mode is set to None.
Expected network bandwidth is the maximum aggregated bandwidth allocated per VM type across all NICs, for all destinations. For more information, see Virtual machine network bandwidth
Upper limits aren't guaranteed. Limits offer guidance for selecting the right VM type for the intended application. Actual network performance will depend on several factors including network congestion, application loads, and network settings. For information on optimizing network throughput, see Optimize network throughput for Azure virtual machines.
To achieve the expected network performance on Linux or Windows, you may need to select a specific version or optimize your VM. For more information, see Bandwidth/Throughput testing (NTTTCP).
Accelerator (GPUs, FPGAs, etc.) info for each size