Edit

Share via

IoT Edge for Linux on Windows networking

  • Article

Applies to: IoT Edge 1.5 checkmark IoT Edge 1.5 IoT Edge 1.4 checkmark IoT Edge 1.4

Important

IoT Edge 1.5 LTS and IoT Edge 1.4 LTS are supported releases. IoT Edge 1.4 LTS is end of life on November 12, 2024. If you are on an earlier release, see Update IoT Edge.

This article provides information about how to configure the networking between the Windows host OS and the IoT Edge for Linux on Windows (EFLOW) virtual machine. EFLOW uses a CBL-Mariner Linux virtual machine in order to run IoT Edge modules. For more information about EFLOW architecture, see What is Azure IoT Edge for Linux on Windows.

Networking

To establish a communication channel between the Windows host OS and the EFLOW virtual machine, we use Hyper-V networking stack. For more information about Hyper-V networking, see Hyper-V networking basics. Basic networking in EFLOW is simple; it uses two parts, a virtual switch and a virtual network.

The easiest way to establish basic networking on Windows client SKUs is by using the default switch already created by the Hyper-V feature. During EFLOW deployment, if no specific virtual switch is specified using the -vSwitchName and -vSwitchType flags, the virtual machine is created using the default switch.

On Windows Server SKUs devices, networking is a bit more complicated as there's no default switch available. However, there's a comprehensive guide on Azure IoT Edge for Linux on Windows virtual switch creation.

To handle different types of networking, you can use different types of virtual switches and add multiple virtual network adapters.

Virtual switch choices

EFLOW supports two types of Hyper-V virtual switches: internal and external. You'll choose which one of each you want when you create it previous to EFLOW deployment. You can use Hyper-V Manager or the Hyper-V module for Windows PowerShell to create and manage virtual switches. For more information about creating a virtual switch, see Create a virtual switch for Hyper-V virtual machines.

You can make some changes to a virtual switch after you create it. For example, it's possible to change an existing switch to a different type, but doing that may affect the networking capabilities of EFLOW virtual machine connected to that switch. So, it's not recommended to do change the virtual switch configuration unless you made a mistake or need to test something.

Depending if the EFLOW VM is deployed in a Windows client SKU or Windows Server SKU device, we support different types of switches, as shown in the following table.

Virtual switch type Windows client SKUs Windows Server SKUs
External External on Client External on Server
Internal - Internal on Server
Default switch Default on Client -

  • External virtual switch - Connects to a wired, physical network by binding to a physical network adapter. It gives virtual machines access to a physical network to communicate with devices on an external network. In addition, it allows virtual machines on the same Hyper-V server to communicate with each other.

  • Internal virtual switch - Connects to a network that can be used only by the virtual machines running on the host that has the virtual switch, and between the host and the virtual machines.

    Note

    The default switch is a particular internal virtual switch created by default once Hyper-V is enabled in Windows client SKUs. The virtual switch already has a DHCP Server for IP assignments, Internet Connection Sharing (ICS) enabled, and a NAT table. For EFLOW purposes, the Default Switch is a Virtual Internal Switch that can be used without further configuration.

IP address allocations

To enable EFLOW VM network IP communications, the virtual machine must have an IP address assigned. This IP address can be configured by two different methods: Static IP or DHCP.

Depending on the type of virtual switch used, EFLOW VM supports different IP allocations, as shown in the following table.

Virtual switch type Static IP DHCP
External External with static IP External with DHCP
Internal Internal with static IP Internal with DHCP
Default switch - Default with DHCP

  • Static IP - This IP address is permanently assigned to the EFLOW VM during installation and doesn't change across EFLOW VM or Windows host reboots. Static IP addresses typically have two versions: IPv4 and IPv6; however, EFLOW only supports static IP for IPv4 addresses. On networks using static IP, each device on the network has its address with no overlap. During EFLOW installation, you must input the EFLOW VM IP4 address(-ip4Address), the IP4 prefix length(-ip4PrefixLength), and the default gateway IP4 address(-ip4GatewayAddress). All three parameters must be input for correct configuration.

    For example, if you want to deploy the EFLOW VM using an external virtual switch named ExternalEflow with a static IP address 192.168.0.100, default gateway 192.168.0.1, and a prefix length of 24, the following deploy command is needed

    Deploy-Eflow -vSwitchName "ExternalEflow" -vswitchType "External" -ip4Address 192.168.0.100 -ip4GatewayAddress 192.168.0.1 -ip4PrefixLength 24

    Warning

    When using static IP, the three parameters (ip4Address, ip4GatewayAddres, ip4PrefixLength) must be used. Also, if the IP address is invalid, being used by another device on thee netowrk, or the gateway address is incorrect, EFLOW installation could fail as the EFLOW VM can't get an IP address.

  • DHCP - Contrary to static IP, when using DHCP, the EFLOW virtual machine is assigned with a dynamic IP address; which is an address that may change. The network must have a DHCP server configured and operating to assign dynamic IP addresses. The DHCP server assigns a vacant IP address to the EFLOW VM and others connected to the network. Therefore, when deploying EFLOW using DHCP, no IP address, gateway address, or prefix length is needed, as the DHCP server provides all the information.

    Warning

    When deploying EFLOW using DHCP, a DHCP server must be present in the network connected to the EFLOW VM virtual switch. If no DHCP server is present, EFLOW installation with fail as the VM can't get an IP address.

DNS

Domain Name System (DNS) translates human-readable domain names (for example, www.microsoft.com) to machine-readable IP addresses (for example, 192.0.2.44). The EFLOW virtual machine uses systemd (system and service manager), so the DNS or name resolution services are provided to local applications and services via the systemd-resolved service.

By default, the EFLOW VM DNS configuration file contains the local stub 127.0.0.53 as the only DNS server. This is redirected to the /etc/resolv.conf file, which is used to add the name servers used by the system. The local stub is a DNS server that runs locally to resolve DNS queries. In some cases, these queries are forwarded to another DNS server in the network and then cached locally.

It's possible to configure the EFLOW virtual machine to use a specific DNS server, or list of servers. To do so, you can use the Set-EflowVmDnsServers PowerShell cmdlet. For more information about DNS configuration, see PowerShell functions for IoT Edge for Linux on Windows.

To check the DNS servers assigned to the EFLOW VM, from inside the EFLOW VM, use the command: resolvectl status. The command's output shows a list of the DNS servers configured for each interface. In particular, it's important to check the eth0 interface status, which is the default interface for the EFLOW VM communication. Also, make sure to check the IP addresses of the Current DNS Servers and DNS Servers fields of the list. If there's no IP address, or the IP address isn't a valid DNS server IP address, then the DNS service won't work.

Static MAC Address

Hyper-V allows you to create virtual machines with a static or dynamic MAC address. During EFLOW virtual machine creation, the MAC address is randomly generated and stored locally to keep the same MAC address across virtual machine or Windows host reboots. To query the EFLOW virtual machine MAC address, you can use the following command.

Get-EflowVmAddr

Multiple Network Interface Cards (NICs)

There are many network virtual appliances and scenarios that require multiple NICs. The EFLOW virtual machine supports attaching multiple NICs. With multiple NICs, you can better manage your network traffic. You can also isolate traffic between the frontend NIC and backend NICs, or separating data plane traffic from the management plane communication.

For example, there are numerous of industrial IoT scenarios that require connecting the EFLOW virtual machine to a demilitarized zone (DMZ), and to the offline network where all the OPC UA compliant devices are connected. This is just one of the multiple scenarios that can be supported by attaching multiple NICs to the EFLOW VM.

For more information about multiple NICs, see Multiple NICs support.

Warning

When using EFLOW multiple NICs feature, you may want to set up the different routes priorities. By default, EFLOW will create one default route per ehtX interface assigned to the VM and assign a random priority. If all interfaces are connected to the internet, random priorities may not be a problem. However, if one of the NICs is connected to an offline network, you may want to prioritize the online NIC over the offline NIC to get the EFLOW VM connected to the internet. For more information about custom routing, see EFLOW routing.

Next steps

Read more about Azure IoT Edge for Linux on Windows Security.

Learn how to manage EFLOW networking Networking configuration for Azure IoT Edge for Linux on Windows