Azure IoT solution integration: Step-by-Step guide

Article
1/17/2024

This article came up from the need to have a guidance step-by-step for Azure beginners on the IoT integration and from the guidance from Ranga Vadlamudi

Goals

Stream data to time series insights
Stream data to cosmos db using azure stream analytics
Code for cosmos db change feeds and invoke azure functions

https://camo.githubusercontent.com/cfaae43b53edf04b4b9cf7ce5ba6cdf10557e52a/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Overview

Setup MXCHIMP
Connect mxchip to iothub
Simulator: https://azure-samples.github.io/iot-devkit-web-simulator/

https://camo.githubusercontent.com/d66a69556687eae5e06f69ebd04423cb478304f4/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Steps

Connect to wifi

Put the device into AP mode by doing the following:
Press and hold the B button
With the B button held down, press and release the Reset button
Release the B button
Verify that an SSID and an IP address appear on the device screen. The IP address is the one that we will use to connect to the device from our laptop.

https://camo.githubusercontent.com/88ce3cafb5854653cb8c641b4da56857c6e8d442/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/3a467da632039ec0935e3709adcaf6564f5dd4c9/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/fc8bd8483d8cca779e6fc43a423c13994d8cee76/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30342d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/52b78e5532a16affe508ed1d69e219db41da4326/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30352d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create IoT Hub:

Go to the Azure Portal, click Create New Resource and type Iot Hub,

https://camo.githubusercontent.com/ac23ae2ad8340b63ac1a552988b650d449a7e4ec/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702d322e706e67

Select IoT Hub and click create

https://camo.githubusercontent.com/5c05b6f0dbf2b7011e0c9451ca98d78296599a71/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702d322e706e67

Select Create IoT hub

https://camo.githubusercontent.com/ef0d2e988f5e7d043a037a4399069dbb716741b8/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f30392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702d322e706e67

https://camo.githubusercontent.com/e045da10b568ebebad825c6573f9c4ed25ecc2f7/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702d322e706e67

Set up Time Series Insight

Now we will create a Time Series Insight service.

Go to the Azure Portal, click on Create New Resource and type Time Series Insights as shown below:

https://camo.githubusercontent.com/ca95915ff2b2f06d285253031e2f6e06c0eef13e/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Then select Time Series Insights:

https://camo.githubusercontent.com/4b6f511e13ca5d6239a2b6343e2462565576271f/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Click create:

https://camo.githubusercontent.com/d2cd0837a6056371e9b945c76530c187e816f7c2/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now we will provide the environment parameters as follows:

Environment name: gab2018-cdmx
Subscription - your Azure Pass / Subscription
Resource group: gab2018-cdmx
Location: West Europe
SKU: S1

https://camo.githubusercontent.com/6cd36ccd8d1835111adaea91bf53e31cab70efe5/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031342d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

**Note: In case we are using an Azure Pass, please review the cost $150 per month!

https://camo.githubusercontent.com/8bb6ef36e4b7772d76df228971d379d6442192f5/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031352d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Then Check the pin to the dashboard and click create.

It is important to have a consumer group for TSI (Time Series Insights), go to the IoT Hub, click Endpoints, select Events

https://camo.githubusercontent.com/d7e98fa1bac2ade913f605d071402e22536335c6/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now we will create a New Consumer Group and then click save:

https://camo.githubusercontent.com/31e5f378ea3b2edd0b451ba1662b56b9ce8e946c/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now go back to Time Series Insights, click on Event Sources and Click on Add:

https://camo.githubusercontent.com/4eba5737093924abb832faa665b88b2be9d4aa0c/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

We will provide the following parameters to create the Event Source:

Event source name: gab2018cdmx
source: IoT Hub
Import Option: user IoT Hub from available subscription
Subscription ID. VS Enterprise / Azure Pass
IoT Hub name: gab2018-cdmx
IoT Hub policy name: iothubowner
IoT consumer group: gabevents
Serialization format: json

Click create

https://camo.githubusercontent.com/6737af84814299f15a31eee3f2d31264f46ddc38/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3031392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/1b8e8d7c3157391d2eab31fdd1b48f65aa35172d/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now go to overview and click go to the environment:

https://camo.githubusercontent.com/d82772183853202de24f7fbd49f3d352dbe70512/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

**Note: We will add data access policies later. We will not be able to access the data in the environment with no data access policies defined.

We will see a screen like below:

https://camo.githubusercontent.com/97a580f6225bdddd4f39f21e75d3b0b5f1039a09/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create a Stream analytics Job

Now go back to the Azure Portal, we will create a Stream analytics Job. Go to Create New Resource, type Stream analytics:

https://camo.githubusercontent.com/5227f339912bbe83f6951d242c899a04a3d62e80/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032342d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Select stream analytics job:

Provide the following parameters:

Job Name: gab2018-cdmx
Subscription: VS enterprise / Azure Pass
Resource Group: gab2018-cdmx
Location: West Europe
Hosting environment: cloud

Note: if already connected the device to Wifi we could try Cloud, otherwise try using Edge and connect the device to Wifi later on

https://camo.githubusercontent.com/f10f0ad81c6f3ec1f0bda82f0e4cdcb76ccfe179/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create a cosmos db account.

Now we will create a cosmos db account.

Select create new resource, type cosmos db, select Azure Cosmos DB:

https://camo.githubusercontent.com/6458aa76bed14f4f09fbcfbc5eb53bb9a6fdd913/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/24bb40ae029b96e3403c75a1badb2003c5e00ba3/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/acbd72a765f99ecd80244aa3dce0bf2cbaaa3260/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3032392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Click create:

Provide the following parameters:

• ID: gab2018cdmx
• API: SQL
• Subscription: VS Enterprise / Azure Pass
• Resource group: gab2018cdmx
• Location: West Europe

Click Create

It is important to highlight that we should try to deploy all the resources in the same location to avoid future issues within the service availability

https://camo.githubusercontent.com/394165a95105dcacfd695c2c42db55f2ac05dc9b/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create a Logic App.

Now we will create a Logic App.

Go to Create new Resource, type logic app

https://camo.githubusercontent.com/5e7aae0273da4d38123a71966281467c162b795e/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Select Logic App:

https://camo.githubusercontent.com/e1644e02a2ec3df88e487041a794e278279de78f/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Click on Logic App, Create:

https://camo.githubusercontent.com/c1a8e5aa9a86a8e77e64c42ac84f04e310889edb/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now provide the following parameters:

Name. gab2018cdmx
Subscription: VS Enterprise
Resource Group. Gab2018 cdmx
Location: West Europe
Log Analytics: Off (for this case we are going to enable them later on)

Click Create

https://camo.githubusercontent.com/70213275786727eaab6fac5d9b9ec5d95f23e85d/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033342d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now go back to the azure stream analytics job, from the blade select Input:

https://camo.githubusercontent.com/f2b6f8cb3ff290315424ec5ca34048358e2007a9/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033352d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

The input for this will be the IoTHub we created in the resource group

Select Add stream input, then select IoT Hub:

https://camo.githubusercontent.com/de0f87d2dc9c4f349a589e00a366ccd4049be5ee/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Provide the following parameters:

Input alias
Select IoT Hub from the subscription
Subscription
IoT Hub (Azure will automatically provide us the available IoT Hub)
Endpoint
Shared access policy name
Shared access policy key
Consumer Group
Event serialization format (we could select None, CSV, Json, etc.) Then click save

https://camo.githubusercontent.com/7666d746708c887b1ba1036578be1705a08629e4/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now we will generate the Output.

Generate output

This output will be the Cosmos DB we created in the resource group

Go to the Stream Job blade and select Output:

https://camo.githubusercontent.com/1855ffc27cf1eecce0ecf233268e3895ae708fa5/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now click Add and select Cosmos DB.

https://camo.githubusercontent.com/01b05d180088b8bba0679c6a1162ba76565cc149/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3033392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Provide the following parameters:

Output alias
Select the Option: "Select Cosmos DB from your subscription"
Select the subscription
Account ID
Account key
Database
Collection name pattern
Document ID

https://camo.githubusercontent.com/80e864e237d895321876e3077376cd700f6896c3/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Please Note:

If the chosen resource and the stream analytics job are located in different regions, we will be billed to move data between regions.

Now we will define a Stream Job Function.

Go to the stream job blade and click on Overview, then click on Edit query:

https://camo.githubusercontent.com/6a2320132861099ad289eb801bd523c87ff5e2f1/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Copy and paste the following query:

SELECT [deviceId] AS [deviceId], avg(temperature) AS avgtemp INTO CosmosDB FROM mvp-iothub GROUP BY deviceId, TumblingWindow(second, 15);

Now click save:

https://camo.githubusercontent.com/f2254535b6d1f1edc6ba8efe8d53cb1edcf39aad/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create an Event Hub which will receive data from Azure Function.

Now we will Create an Event Hub which will receive data from Azure Function.

TIP: Take a note of keys and name.

Go to create Resources and type Event hub:

https://camo.githubusercontent.com/20b251c637a3c708dc6ae61452c902509f1af356/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now select the event hubs and click create:

https://camo.githubusercontent.com/11a54c1987dfc4191871b93118ede979c2914d7b/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034352d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/4f4df6da89846f2dcccc0b5cb98b6ca422252b55/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Provide the following parameters and click create:

Name
Pricing tier
Subscription
Resource Group
Location
Throughput units
Enable auto-inflate
Specify upper limit to 20

https://camo.githubusercontent.com/00c1c5603847ca78c29c85bdd11986409ec345be/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Once provisioned we will create a new event hub:

https://camo.githubusercontent.com/3a69bd7abf7ce088d3dc432f82c3df298c06ff8d/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Also, create a SAS policy for this event hub:

https://camo.githubusercontent.com/139487e3b680e708b45f05260f007a63b4196713/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3034392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Create an Azure Function.

Now Create an Azure Function.

Go to create New Resource, type functions:

https://camo.githubusercontent.com/6e81fba9f0cc5f5aec84d44474a82ec304a1cc31/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Select Functions App:

https://camo.githubusercontent.com/81377319bd8761a458bd6f086a22a5c9ee62bd87/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Click create:

https://camo.githubusercontent.com/59ab73be0bfe46cfa2cd5bc3038ea56e270248b7/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now Provide the following parameters:

App name
Subscription
Resource Group
OS: Windows
Hosting Plan: Consumption Plan
Location: West US
Storage: Create New
Application Insights: ON

https://camo.githubusercontent.com/cfba5b392f88e93b5b8040e921cf9c66ac654afb/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Use Azure Functions on the Azure Portal.

Go to the Azure portal, we will select the function and click on Add then we will select Azure Cosmos DB Trigger:

https://camo.githubusercontent.com/e1979c0bd1addd306a4ba849f25e9d23fe127587/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035342d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/2f24cbfd34d514df91f282debb9150a9da4011f1/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035352d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Now click on New and confirm this new account connection is related to our previously created Cosmos DB

https://camo.githubusercontent.com/75226e628626e0ecce021b3744c914ee025b1d17/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035362d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/2fd20acf5ffd29b6c498be1b9a47290e32266bed/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035372d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Replace with the following code:

#r "D:\home\site\wwwroot\CosmosTriggerCSharp1\bin\Microsoft.Azure.Documents.Client.dll"
#r "D:\home\site\wwwroot\CosmosTriggerCSharp1\bin\Microsoft.Azure.EventHubs.dll"
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using Microsoft.Azure.Documents;
using Microsoft.Azure.EventHubs;
public static void Run(IReadOnlyList<Document> documents, TraceWriter log){
if (documents != null && documents.Count > 0) {
string connectionString = ConfigurationManager.ConnectionStrings["EventHubConnection"].ConnectionString;
log.Verbose(connectionString);
var connectionStringBuilder = new EventHubsConnectionStringBuilder(connectionString) {
EntityPath = "eventhub"
};
var client = Microsoft.Azure.EventHubs.EventHubClient.CreateFromConnectionString(connectionStringBuilder.ToString());
foreach (var doc in documents) {
string json = string.Format("{{\"iotid\":\"{0}\",\"temp\":{1}}}", doc.GetPropertyValue<string>("iotid"),
doc.GetPropertyValue<string>("temp"));
EventData data = new Microsoft.Azure.EventHubs.EventData(Encoding.UTF8.GetBytes(json));
client.SendAsync(data);
}
}
}

Now click on the function, then select platform features, then click on Kudu Console:

https://camo.githubusercontent.com/1ac5238678e57e6a266782667fe1edbbe8201b57/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035382d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

We will be redirected to another tab in our browser to manage our Azure Function:

https://gab2018-cdmx.scm.azurewebsites.net/

Click on debug console, cmd:

https://camo.githubusercontent.com/a6c373972b77e33b53cc838a0ab21f5f5cf90c0d/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3035392d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Navigate to function directory by double clicking on wwwroot and then create a bin directory using the “+” sign.

https://camo.githubusercontent.com/07500ba8dde1757406f651592eaebfe0ca8cb777/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3036302d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/174ad72f40348b1c41b40027d2a2de6979d19a16/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3036312d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

Go to Bin directory by double clicking on it and then add the following DLL. Get these DLL from nuget

https://camo.githubusercontent.com/ae930d68b9336ae364b585ac5298d3f64f0b3909/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3036332d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67

https://camo.githubusercontent.com/2554d57695fecbb0c79372db7a29edff437bd9e1/68747470733a2f2f77696b69617a7572652e636f6d2f77702d636f6e74656e742f75706c6f6164732f323031382f30342f3036322d417a7572652d496f542d436f736d6f732d44422d776f726b73686f702e706e67