How to Remove or Replace or Add a Entry in a Attribute in Bulk using ADmodify Tool

Lets say I want to Clear or modify or set a attribute in Active Directory for more objects in Bulk

ADModify is the best tool to do it , I would say

Let us see how to Add a Entry in a attribute

For Example – I may have to set or clear the value of this attribute “msExchQueryBaseDN” in Exchange 2010

Clearing for some users might be simple to do it , But in Bulk Admodify is one of the best tool to do it

http://careexchange.in/wp-content/uploads/2012/09/image_thumb62.png

Download Admodify

Extract in – Use it on a DC or Exchange Server

I prefer it on a DC

Run Admodify.exe

http://careexchange.in/wp-content/uploads/2012/09/image_thumb63.png

3 Tasks on this Page

——————————

1. Choose “Domain Partition”

2. Choose “Domain Controllers List”

3. Uncheck “Show Containers only”

http://careexchange.in/wp-content/uploads/2012/09/image_thumb64.png

Choose the Whole OU or Specific Users

and Add to List

http://careexchange.in/wp-content/uploads/2012/09/image_thumb65.png

Now Choose “Select All”

http://careexchange.in/wp-content/uploads/2012/09/image_thumb66.png

You can choose any tab and Customize in Bulk

http://careexchange.in/wp-content/uploads/2012/09/image_thumb67.png

In our Case its – attribute “msExchQueryBaseDN”

Choose “Custom” tab

5 Tasks

————-

1. Have Checked “Make a customized attribute modification”

2. Entered the attribute Name – Where I need to modify

3. Attribute Value

4. Check “MultiValued Append”

— Why yo Choose “MultiValued Append”

If there is Entry already available – Where some attributes have multiple entries – It does not going to remove the Existing ones.

Instead adds an Extra entry to the same attribute

– Check or Uncheck – Depends on your situation –

By default you can check it Cause it won’t bring you harm if you happen to edit a attribute which has multiple values

5. Choose Go

http://careexchange.in/wp-content/uploads/2012/09/image_thumb68.png

It will add the Entries on all the Chosen objects

http://careexchange.in/wp-content/uploads/2012/09/image_thumb69.png

To Clear an Existing Attribute

5 Tasks

————-

1. Have Checked “Make a customized attribute modification”

2. Entered the attribute Name – Where I got to modify

3. Attribute Value “%Null%

4. Check “MultiValued Append”

5. Choose Go

http://careexchange.in/wp-content/uploads/2012/09/image_thumb70.png

It takes the Attribute to “Not Set”

http://careexchange.in/wp-content/uploads/2012/09/image_thumb71.png

 

Great !!

You learnt to Use Admodify Tool

Regards
Satheshwaran Manoharan