Virtual Machine Manager (VMM) 2008 R2 Error Codes (500-999)
Links to other error code pages can be found on the Virtual Machine Manager (VMM) 2008 R2 Error Codes page.
To find a specific error message in this table, type Ctrl-F and enter the error code. If you have additional information about how to fix an error, add it to the "Additional Troubleshooting Information" column.
| Code | Message | Recommended Action (in product) | Additional Troubleshooting Information |
| 500 | Could not retrieve configuration data from the virtual machine host %ComputerName;. | Verify that Windows Management Instrumentation, Windows Remote Management (WS-Management), virtualization software, and Virtual Machine Manager Agent services are running on %ComputerName;. Then try the operation again. | |
| 501 | The virtual machine host %ComputerName; cannot be removed because one or more virtual machines are active on the virtual machine host. | All virtual machines must be deleted from %ComputerName; before the Host can be deleted. Delete the virtual machines, and then try again. | |
| 502 | The selected network adapter does not exist on the virtual machine host. | Verify that the adapter is in the list obtained by running Get-VMHostNetworkAdapter -VMHost (Get-VMHost -ComputerName %ComputerName;). | |
| 503 | The specified virtual network %VirtualNetworkName; does not exist. | Verify the virtual network name by refreshing the Host Properties dialogue box, go to the Hardware tab and click the Virtual Network option. Then try the operation again. | |
| 504 | The virtual network %FriendlyName; already exists on the virtual machine host. | Check the virtual network name, and then try the operation again. | |
| 505 | Virtual Machine Manager was unable to create a new virtual network %FriendlyName;. | Check the virtual network name, and then try the operation again. | |
| 506 | The virtual network name %VirtualNetworkName; contains a character that is not valid. | Check the virtual network name and then try the operation again. For a host that is running Virtual Server, a virtual network name cannot contain any of the following characters: *?:<>/|\" | |
| 507 | All associated virtual machines will be disconnected. Are you sure you want to delete this virtual network? | BLANK | |
| 508 | A virtual network name must be provided. | Enter a valid virtual network name, and then try the operation again. | |
| 510 | A virtual network path was not selected. | Select a virtual network path, and then try the operation again. | |
| 511 | The IP address is not valid. | Enter a valid IP address, and then try the operation again. | |
| 512 | The network IP address must be the base of the subnet. | Enter a valid IP address that is the base of the subnet, and then try the operation again. | |
| 513 | The IP address is not valid. The host server reserves the first 16 IP addresses for its own internal use. | Enter a valid IP address outside the range of first 16 reserved addresses, and then try the operation again. | |
| 514 | The ending IP address is not in a valid range. The last valid address of the subnet is reserved. | Enter a valid IP Address within the range, and then try the operation again. | |
| 515 | A valid default gateway address must be either part of same network or left blank. | Enter a valid gateway address, and then try the operation again. | |
| 516 | The DHCP settings could not be saved. The DHCP Server address is not in a valid range. DHCP Server address should be between the first valid IP address and starting IP address. | Enter a valid DHCP server address, and then try the operation again. | |
| 517 | The IP address lease time that has been entered is not in a valid range. The maximum value is 49710 days. | Enter valid lease time value, and then try the operation again. | |
| 518 | The network mask is not valid. The network mask format should be xxx.xxx.x.x. | Enter a valid network mask, and then try the operation again | |
| 519 | While Virtual Machine Manager is applying the changes, the host may temporarily lose network connectivity. This may have an adverse effect on other network operations in progress. \n\nDo you want to continue? | BLANK | |
| 520 | The virtual machine paths %PathName; are not present on the host. Verify that all selected virtual machine paths exist on the host, and then try the operation again. | BLANK | |
| 521 | The lease renewal time must be less than the lease rebinding time. Also, the lease rebinding time must be less than IP address lease time. | Enter a valid lease time, and then try the operation again. | |
| 522 | The minimum value allowed for IP lease time is 60 seconds. | Enter a valid lease time, and then try the operation again. | |
| 523 | The minimum value allowed for lease rebinding time is 45 seconds. | Enter a valid lease time, and then try the operation again. | |
| 524 | The minimum value allowed for lease renewal time is 30 seconds. | Enter a valid lease time, and then try the operation again. | |
| 525 | Agent installation failed on %ComputerName; because of an incompatible operating system version. | Ensure that %ComputerName; is running either Microsoft Windows XP or Windows Server 2003 operating system. | |
| 526 | Host configuration failed on %ComputerName; because no virtual machine paths are specified. | Ensure that at least one virtual machine path is specified. | |
| 527 | All network adapters bound to this virtual network will be disconnected. Are you sure you want to continue? | BLANK | |
| 550 | VMM cannot access registry key %RegistryKey;. | Verify that the registry key exists, and then try the operation again. | |
| 551 | VMM cannot access registry key value %RegistryKeyValueName; under %RegistryKey;. | Verify that the registry key value exists, and then try the operation again. | |
| 552 | The registry key syntax %RegistryKey; is incorrect. | Ensure that the key is not empty, contains only valid characters and is less than 255 characters. | |
| 553 | The type or name syntax of the registry key value %RegistryKeyValueName; under %RegistryKey; is incorrect. | Ensure that the type of value name is correct; the name is not empty, contains only valid characters and is less than 255 characters. | |
| 554 | Permissions have not been granted to access the registry key %RegistryKey;. | Verify permissions on this registry key, and then try the operation again. | |
| 555 | The operation on the registry key %RegistryKey; was not successful. A system error occurred, such as deletion of the key, or an attempt to create a key in the LocalMachine root, or the nesting level exceeds 510. | Verify the registry key properties, and then try the operation again. | |
| 556 | VMM cannot delete the registry key %RegistryKey;. The subkey does not specify a valid registry subkey, has child subkeys or deletion of a root hive has been attempted. | Verify that the registry key is present, and then try the operation again. | |
| 557 | You must enter at least one virtual machine path. | Add a default virtual machine path, and then try the operation again. | |
| 606 | Virtual Machine Manager cannot locate the specified answer file %SourceSysprepInfFile;. | Ensure the specified answer file path is valid, and then try the operation again. | |
| 608 | Virtual Machine Manager cannot write to the Sysprep.inf file. | Verify that there is sufficient disk space on the Virtual Machine Manager server, and then try the operation again. | |
| 609 | Virtual Machine Manager cannot detect a heartbeat from the specified virtual machine. Either the virtual machine is not running or Virtual Machine Additions is not installed. | Verify the status of the virtual machine by connecting to it using Virtual Machine Remote Client (VMRC), and then try the operation again. | |
| 610 | Virtual Machine Manager was unable to find a value for the required Sysprep parameter %SysPrepEntry;. | Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again. | |
| 611 | Virtual Machine Manager cannot create the folder %DirectoryPath;. | Ensure that you have specified a valid path, and then try the operation again. | |
| 612 | Virtual Machine Manager cannot delete the folder %DirectoryPath;. | You need to delete the folder manually. | |
| 613 | Virtual Machine Manager cannot delete the file %FileName;. | You need to delete the file manually. | |
| 616 | Specify the location of the virtual machine by its path. You cannot use a UNC name. | Enter the location of the virtual machine by its path, and then try the operation again. | |
| 617 | Virtual Machine Manager cannot find or cannot access the location %FolderPath; specified for the virtual machine. | Ensure that the path is valid, and then try the operation again. | |
| 619 | The -ISO and -HostDrive parameters are mutually exclusive. You can specify a value for either the -ISO parameter or the -HostDrive parameter, but you cannot specify a value for both parameters in the same operation. | Review the command, and then try the operation again. | |
| 620 | The DVD drive must be specified by the drive letter, followed by a colon. | Review the parameter, and then try the operation again. | |
| 621 | The -VirtualFloppyDisk and -HostDrive parameters are mutually exclusive. You can specify a value for either the -VirtualFloppyDisk parameter or the -HostDrive parameter, but you cannot specify a value for both parameters in the same operation. | Review the command, and then try the operation again. | |
| 622 | The floppy drive must be specified by the drive letter, followed by a colon. | Review the parameter, and then try the operation again. | |
| 623 | When the value for the -PhysicalAddressType Static parameter is specified, a Media Access Control (MAC) address for the -PhysicalAddress parameter must also be specified. | Enter a MAC address for the missing parameter, and then try the operation again. | |
| 624 | If the value for the -PhysicalAddressType Dynamic parameter is specified, you cannot specify a value for the -PhysicalAddress parameter. | Review the command, and then try the operation again. | |
| 625 | The specified MAC address format is incorrect. The MAC address format is 00-00-00-00-00-00. | Enter a valid MAC address, and then try the operation again. | |
| 626 | Channels are not available on the IDE bus for the addition of a new device. | If you are trying to add a virtual hard disk, add the disk to a SCSI bus, and then try the operation again. | |
| 627 | An additional virtual hard disk (VHD) can be attached to only one virtual machine at a time. The VHD %FilePath; cannot be attached to the new virtual machine because it is already attached to the virtual machine %VMName;, which is located on the host %VMHostName;. | Specify an additional virtual hard disk that is not attached to any other virtual machine, and then try the operation again. | |
| 628 | There are no available slots on the SCSI bus to add new devices. | The SCSI bus cannot support the addition of new devices. | |
| 629 | The virtual machine must be stopped before a virtual hard disk can be added. | Stop the virtual machine, and then try the operation again. | |
| 630 | The computer name must be a valid IP address or a name containing letters and numbers. The computer name cannot contain spaces or any of the following characters `~!@#$%%^&*()=+[]{}\|;:'",<>/? . | Specify a valid computer name, and then try the operation again. | |
| 631 | The product identification number must use the format xxxxx-xxxxx-xxxxx-xxxxx-xxxxx. | Specify a valid product identification number, and then try the operation again. | |
| 632 | The passwords you have entered do not match. | Enter the password again. | |
| 633 | You must enter valid values for the domain name, domain user, and domain password entries to join a domain. One or more of the values you have entered for joining the domain are not valid. | Verify the values for the domain name, domain user, and domain password entries, and then try the operation again. | |
| 634 | The workgroup name cannot contain more than 15 letters or numbers. The value you have entered is not valid. | To join a workgroup, enter a valid value for the workgroup name, and then try the operation again. | |
| 635 | Virtual Machine Manager is unable to securely store the password information on this machine. | Ensure that the Microsoft Cryptographic Service has been installed on the Virtual Machine Manager server and try the operation again. | |
| 636 | Virtual Machine Manager is unable to retrieve previously stored password information. | Either restore the key data from a previous backup or enter the information again. | |
| 637 | Virtual Machine Manager is unable to find a value for one or more required Sysprep parameters, such as FullName, ComputerName, or ProductKey. | Ensure that all required values are specified, and then try the operation again. | |
| 638 | Virtual Machine Manager is unable to find a value for one or more required Sysprep parameters, such as FullName, ComputerName, or ProductKey. | Verify the values are specified in the Sysprep script, and then try the operation again. | |
| 639 | Virtual Machine Manager does not support the specified processor type. | Select a supported processor, and then try the operation again. | |
| 640 | The virtual machine must be in either the Poweroff or Stored state before SCVMM can perform the specified hardware changes. | Turn off the virtual machine or store it to the library, and then try the operation again. | |
| 641 | VMM cannot perform the specified media change because the virtual machine is currently in an error, transitional, or a failed state. | Change the state, and then try the operation again. | |
| 642 | The virtual machine must be turned off before Virtual Machine Manager can update the network configuration changes. | Turn off the virtual machine, and then try the operation again. | |
| 643 | Unable to set virtual machine memory to %MemorySize; MB. | Ensure the virtual machine host has specified available memory, and then try the operation again. | |
| 644 | The specified host drive %DriveName; does not exist on the host machine. | Modify the virtual DVD drive property to connect to an existing host drive. | |
| 645 | The specified host drive %DriveName; does not exist on the host machine. | Modify the virtual floppy drive property to connect to an existing host drive. | |
| 646 | Slots are not available on the network adapters bus for the addition of new devices. | The network bus cannot support the addition of new devices. | |
| 647 | The timezone is not valid. | Refer to the Sysprep documentation for valid values for timezone, and then try the operation again. | |
| 649 | A host drive is not selected. | Select a host drive or choose a different capture mode. | |
| 650 | A known image file is not selected. | Select an image file or choose a different capture mode. | |
| 651 | A known floppy disk is not selected. | Select a floppy disk or choose a different capture mode. | |
| 652 | The value for VM Memory is empty. | Enter a value for the amount of VM Memory, and then try the operation again. | |
| 653 | The value entered for VM Memory is not valid. | Enter a valid value for the amount of memory, and then try the operation again. | |
| 654 | The value %MemorySize; MB specified for virtual machine memory is not within a valid range on the %VMHostName; host. | Enter a value between %MinMemory; and %MaxMemory; MB for virtual machine memory, and then try the operation again. | |
| 655 | The value entered for the MAC address is empty. | Enter a MAC address in the format xx-xx-xx-xx-xx-xx or choose to use a dynamic address, and then try the operation again. | |
| 656 | The value entered for the MAC address is not valid. | Enter a MAC address in the format xx-xx-xx-xx-xx-xx or choose to use a dynamic address, and then try the operation again. | |
| 657 | A virtual hard disk is not specified. | Select a virtual hard disk, and then try the operation again. | |
| 658 | The bus location for the object %FriendlyName; at (%BusType;, %Bus;, %Lun;) is not valid. | Ensure the bus location values are valid, and then try the operation again. | |
| 659 | Another device is already at the location (%BusType;, %Bus;, %Lun;). | Select another destination for the disk, and then try the operation again. | |
| 660 | LUN ID 7 is reserved for SCSI adapters and is not available for use. | Select another destination for the disk, and then try the operation again. | |
| 661 | This operation cannot be completed because the virtual machine must be turned off. | Shutdown the virtual machine and try the operation again. | |
| 662 | The library virtual hard disk does not support SCSI, IDE, bus or LUN switches. | Verify that you are using the correct command, and then try the operation again. | |
| 663 | The -Name parameter cannot be empty or contain spaces for object %ObjectType;. | Provide a valid name for the object, and then try the operation again. | |
| 664 | A virtual hard disk %FileName; cannot be attached to the same virtual machine or template more than once directly or via differencing disk. | Attachment of a virtual hard disk to a virtual machine or template multiple times is not supported. | |
| 665 | The swap operation requires a disk to be connected to a virtual machine or template. | Verify that there is a valid connection, and then try the operation again. | |
| 666 | To perform a swap operation both disks need to be connected to the same object. | Verify that both disks are connected to the same object, and then try the operation again. | |
| 667 | The swap operation is not supported on virtual hard disks stored in the library. | Verify that the virtual hard disks are stored in a valid location, and then try the operation again. | |
| 668 | A SCSI adapter does not exist on bus %Bus;. | Verify the contents of bus %Bus;, and then try the operation again. | |
| 669 | The virtual machine must be run under a user account in order to use the -StartAction and -DelayStart parameters. | Use the -RunAsUserCredential to specify the user account, and then try the operation again. | |
| 670 | The -RunAsUserCredential command requires a valid account and password. | Enter a valid account and password, and then try the operation again. | |
| 671 | The -RunAsSystem and -RunAsUserCredential command cannot be specified at the same time. | Run each command separately. | |
| 672 | The template being created should contain at least one virtual hard disk. | Specify at least one virtual hard disk, and then try the operation again. | |
| 673 | The Boot.ini file is not on specified boot virtual hard disk that Sysprep need to be run on. | Specify a valid boot virtual hard disk, and then run Sysprep. | |
| 674 | The Boot.ini file does not contain the value for the entry Section = %SysprepSection; Key = %SysprepKey;. | Specify a valid boot virtual hard disk, and then run Sysprep. | |
| 675 | Unable to run Sysprep because the boot virtual hard disk does not contain any volumes. | Specify a valid boot virtual hard disk. | |
| 676 | The Windows and System partitions are different. Sysprep is not supported. | Specify a virtual machine that has the same boot and windows partition, and then try the operation again. | |
| 677 | This operating system %SoftwareVersion; is not supported when creating a template. | Select another virtual machine to create the template from, and then try the operation again. | |
| 678 | Sysprep binary %FileName; does not exist for Windows version %SoftwareVersion; in Folder %FilePath;. | Add the missing Sysprep binaries for the specified Windows version in the specified folder, and then try the operation again. | |
| 679 | 0 | ||
| 680 | Timeout occurred while waiting for Sysprep to finish processing on the virtual machine. | Ensure you are using the version of Sysprep binaries that match with virtual machine's Windows version, and then try the operation again. | |
| 681 | A destination file name is required when creating a new disk. | Create a new file name, and then try the operation again. | |
| 682 | A template cannot be created from virtual machine %VMName;. | Stop or shut down the virtual machine, and then try the operation again. | |
| 684 | The repair virtual machine dismiss command is not supported for virtual machine %VMName; in state %FromState;. | BLANK | |
| 685 | This job cannot be restarted until the virtual machine %VMName; is repaired. | Run the repair action on this virtual machine to complete the job. | |
| 686 | The version of Virtual Server on host %VMHostName; is not the supported VS R2 SP1 version. | The selected virtual machine %VMName; cannot run Sysprep on host %VMHostName;. Upgrade Virtual Server on the selected host to the R2 SP1 version, and then try the operation again. | |
| 687 | Virtual machine %VMName; creation cannot restart. To restart a virtual machine must be in the Creation Failed or Customization Failed state. | Provide a valid virtual machine to restart the creation process. | |
| 688 | To join a domain both parameters; -JoinDomain and -JoinDomainCredential must be specified. | Verify that both parameters are included, and then try the operation again. | |
| 689 | The -JoinWorkgroup and -JoinDomain parameters cannot be used together. | Specify either -JoinWorkgroup or -JoinDomain parameters, and then try the operation again. | |
| 690 | The disk size is larger than the available space. The disk size is %DiskSize; GB and the maximum amount allowed for bus %BusType; is %MaxDiskSize; GB. The maximum disk sizes are: IDE (127 GB) and SCSI (2040 GB). | Reduce the disk size or connect it to another bus type, and then try the operation again. | |
| 691 | Virtual machine %VMName; cannot be cloned. A virtual machine must be in Poweroff or Stored state in order to be cloned. | Turn off the virtual machine or store it to the library, and then try the operation again. | |
| 692 | Virtual Machine Manager cannot join %ObjectType; %FriendlyName; to the domain without a network adapter. | Add at least one network adapter to the virtual machine or template, and then try the operation again. | |
| 693 | This action is not valid because virtual machine %VMName; is in state %FromState;. The repair action can only be used on a virtual machine in a failed state. | BLANK | |
| 694 | If you specify parameter -NoConnection, you cannot provide -VirtualNetwork. | Specify either -NoConnection or -VirtualNetwork parameter. | |
| 695 | Either user credentials are required to perform this operation or virtual machine has to be set to run as system. | Either use the -RunAsUserCredential to specify the user account or -RunAsSystem to specify system account, and then try the operation again. | |
| 696 | A virtual SCSI adapter can only be attached to Lun ID 6 or 7. | Review your command parameters and try the operation again. | |
| 697 | Source template %FriendlyName; is not in a valid state. | Select a template in that is in a valid state. | |
| 698 | An ISO %FileName; cannot be attached to the same virtual machine, template or hardware profile more than once. | Attach an ISO image to a virtual machine, template or hardware profile only once. Attachment of an ISO image to a virtual machine, template or hardware profile via multiple DVD drives is not supported. | |
| 699 | Virtual machine %VMName; needs to be in a virtual machine host to share its disks. | Deploy the virtual machine to a virtual machine host and try the operation again. | |
| 700 | Virtual hard disk %FileName; needs to be in the SCSI bus for sharing to be allowed. | Move the disk to a shared SCSI bus and try again. | |
| 701 | Virtual hard disk %FileName; needs to be of fixed size type for sharing to be allowed. | Provide a virtual hard disk that is of fixed size and try again. | |
| 702 | SCSI adapter at bus %Bus; needs to be shared so its disk can be shared. | Share the SCSI adapter and try again. | |
| 703 | Destination for the disk is %ObjectType;. Sharing virtual hard disks is only allowed between virtual machine objects. | Provide a virtual machine and try again. | |
| 704 | Virtual hard disk sharing is only allowed within the same host. | Move both virtual machines to the same host and try again. | |
| 705 | Destination for the virtual hard disk %FileName; is not a shared SCSI bus. | Set the SCSI adapter as destination for the shared disk and try again. | |
| 706 | Sysprep failed for virtual machine %VMName;. | Try the operation again. | |
| 707 | Cannot dismiss sysprep failure for virtual machine %VMName; as virtual machine is not recoverable. | Retry sysprep or remove virtual machine. | |
| 708 | Can only convert virtual hard disks belonging to a virtual Machine that is present on a virtual machine host. | Select a virtual hard disk attached to a virtual machine on the host, and then try the operation again. | |
| 709 | Virtual hard disk conversion is supported only for virtual hard disks that are fixed or dynamically expanding. | Select a virtual hard disk that is either fixed or dynamically expanding, and then try the operation again. | |
| 710 | Ethernet address type %MACType; is not valid. | Ensure the parameter is valid and try again. | |
| 711 | SCVMM cannot change the name of the virtual machine because the virtual machine is not in either a Poweroff or Stored state. | Turn off the virtual machine or store it to the library, and then try the operation again. | |
| 712 | A virtual machine must be in either the Poweroff, Saved, or Stored state to change the RunGuestCredential virtual machine property. | Turn off the virtual machine, save the virtual machine state, or store the virtual machine in the library, and then try the operation again. | |
| 713 | SCVMM cannot modify StopAction property of the virtual machine because it is in either an unsupported, transitional, or a failed state. | If the virtual machine is in a transitional state, wait for the operation to complete, and then try the command again. If the virtual machine is in a failed or unsupported state, repair the failure, and then try the operation again. | |
| 714 | SCVMM cannot modify the virtual machine because it is in either an unsupported, transitional, or a failed state. | If the virtual machine is in a transitional state, wait for the operation to complete, and then try the command again. If the virtual machine is in a failed or unsupported state, repair the failure, and then try the operation again. | |
| 715 | The option %RepairOption; is not supported for repairing the virtual machine %VMName; in state %FromState;. | >Use an option supported by the state %FromState;, and then try the operation again. | |
| 716 | CPUReserve value (%CPUReserve;) cannot be greater than CPUMax value (%CPUMax;). | Please review your parameters and run the command again. | |
| 717 | The compact virtual hard disk %FileName; operation timed out after waiting for %VHDActionTimeoutInHours; hours. | Try the operation again. | |
| 718 | The convert virtual hard disk %FileName; operation timed out after waiting for %VHDActionTimeoutInHours; hours. | Try the operation again. | |
| 719 | The create virtual hard disk %FileName; operation timed out after waiting for %VHDActionTimeoutInHours; hours. | Try the operation again. | |
| 720 | A user name must be specified. | Enter a user name and then try the operation again. | |
| 721 | Do you want to populate the OS profile with values from the answer file where available? | BLANK | |
| 722 | The virtual machine cannot be repaired because the last job that ran on the virtual machine is no longer available. | Repair the virtual machine, using the dismiss option if it is available. Otherwise, copy the files of the virtual machine to a new location and recreate the VM. To find the associated files, use the Get-VM cmdlet from the command line to retrieve the VM object. View the properties of the VM object to retrieve the location of the files. | |
| 723 | Unable to restart the specified job. Only the most recent job that ran on the virtual machine %VMName; can be restarted. | Use the Repair VM action to repair the virtual machine. | |
| 724 | Unable to configure hardware because a host disk is not specified. | Select a pass-through disk and then try the operation again. | |
| 725 | Unable to configure hardware because a text file is not specified. | Enter a text file and then try the operation again. | |
| 726 | Unable to configure hardware because a named pipe is not specified. | Enter a named pipe and then try the operation again. | |
| 728 | The operation to expand virtual hard disk %FileName; timed out after %VHDActionTimeoutInHours; hours. | Retry the operation again. | |
| 729 | The specified size for virtual hard disk %FileName; must be larger than its current size and less than the maximum size supported by Hyper-V. | Specify a valid size and then try the operation again. | |
| 730 | Parameters cannot be specified for the guest operating system because the selected template was created as a non-customizable template (-NoCustomization parameter). | Please retry the operation without specifying guest operating system parameters. | |
| 733 | File %FileName; was removed from Virtual Machine Manager, but it could not be deleted from host %VMHostName; because VMM does not have sufficient rights to delete this file. | If the file is no longer needed, manually delete it from the host. | |
| 734 | The value %MemorySize; MB specified for virtual machine memory is not within a valid range. | Enter a value between %MinMemory; and %MaxMemory; MB for virtual machine memory, and then try the operation again. | |
| 735 | Parameters cannot be specified for the guest operating system when creating a non-customizable template. | Review the command, and try the operation again. | |
| 800 | VMM cannot find %FilePath;. | Ensure the path is valid, and then try the operation again. | |
| 801 | VMM cannot find %ObjectType; object %FriendlyName;. | Ensure the library object is valid, and then try the operation again. | |
| 802 | The %ObjectType; file %FilePath; is already in use by another %ObjectType;. | Wait for the object to become available, and then try the operation again. | |
| 803 | Virtual machine %FriendlyName; already exists on the virtual machine host %VMHostName; | Specify a new name for the virtual machine, and then try the operation again. | |
| 804 | The template %FriendlyName; already exists. | Specify a unique name for the template, and then try the operation again. | |
| 807 | The file location path must be a shared path. | Specify the shared path as \\servername\sharename, and then try the operation again. | |
| 808 | VMM cannot access the specified file because access is denied. VMM must have the proper permissions to the file for access. | Change the file access permissions, and then try the operation again. | |
| 809 | VMM cannot remove the virtual machine because it is in the %FromState; state. | Change the virtual machine's state, and then try the operation again. | |
| 810 | Are you sure you want to remove %ObjectType; %FriendlyName;? (All files associated with this resource will be deleted) | BLANK | |
| 811 | VMM cannot add a virtual hard disk that is associated with a virtual machine. | Specify a virtual hard disk that is not associated with a virtual machine, and then try the operation again. | |
| 812 | VMM cannot remove the disk because it is the parent of a differencing disk. | Remove all differencing disks associated with the parent disk, and then try the operation again. | |
| 813 | The specified owner is not a valid Active Directory Domain Services account. | Specify a valid Active Directory Domain Services account, and then try the operation again. | |
| 814 | Cannot remove virtual disk because a virtual machine is using this virtual disk. | To remove this virtual disk, first remove it from the hardware profile of the virtual machine using this virtual disk, then try again. | |
| 815 | VMM cannot remove this library object because a virtual machine, template, hardware or guest operating system profile is using it. | To remove the library object, first remove it from all virtual machines, templates, hardware and guest operating system profiles that are using it, then try the operation again. | |
| 816 | A valid name is required to complete this task. | Enter a new name, and then try the operation again. | |
| 817 | VMM cannot add %FileName; as %ObjectType;. The file extension of %FileName; does not match the supported file extensions for %ObjectType;. | Select a file with a file extension that matches %ObjectType;, and then try the operation again. | |
| 818 | VMM cannot find the library share. | Specify a valid library share, and then try the operation again. | |
| 819 | Library share %FriendlyName; already exists. | Specify a unique library share name, and then try the operation again. | |
| 820 | The path %SharePath; is not a share. | Specify a valid path for the share, and then try the operation again. | |
| 821 | The state of virtual machine %VMName; changed from %FromState; to %ToState;. | BLANK | |
| 822 | After the following resources are removed, you will not be able to manage these resources using Virtual Machine Manager. Do you want to continue?\n%ObjectList; | BLANK | |
| 823 | VMM cannot compact a virtual hard disk in the Library. | Compact the virtual hard disk on the virtual machine host instead. | |
| 824 | VMM cannot link to this ISO because it is not a standalone ISO stored in a library. | Store the ISO image in the library or link to an ISO image in the library, and then try the operation again. | |
| 825 | VMM cannot remove this library share since %ObjectType; %FriendlyName; is referenced in both this library share and another library share. | Remove %ObjectType; %FriendlyName; and then try the operation again. | |
| 826 | Unable to add library share %SharePath; because the library share's local path, %FilePath;, is the parent or child folder of an existing library share. | Use an independent share, and then try the operation again. | |
| 827 | Unable to perform this operation because the destination share, %SharePath;, either is not a library share in Virtual Machine Manager or is not present on library server %ServerName;. | Ensure the share path is on a library share on the specified library server, add the share to Virtual Machine Manager as a library share, or select a different library share. | |
| 828 | The %ObjectType; "%FriendlyName;" already exists. | Specify a different name for the %ObjectType; being edited | |
| 829 | The selected machine %ComputerName; cannot be contacted. | Ensure that %ComputerName; is online, connected to the network, and not blocked by a firewall. Then try the operation again. | |
| 830 | Are you sure you want to remove %ObjectType; %FriendlyName;? | BLANK | |
| 831 | After the following resources are removed, you will not be able to manage these resources using Virtual Machine Manager. Do you want to continue?\n%ObjectList; (All files associated with these resources will be deleted) |
BLANK | |
| 832 | After the following resources are removed, you will not be able to manage these resources using Virtual Machine Manager. Do you want to continue?\n%ObjectList; (All files not associated with selected templates will be deleted) |
BLANK | |
| 833 | The VMM default library share and library server cannot be removed. | BLANK | |
| 834 | The path %FileName; is not a registered share path on the library server %ComputerName;. | Specify a valid share path on %ComputerName;. | |
| 835 | SCVMM does not have permissions to access the share %ShareName; on the library server %ComputerName;. | Ensure that both Local System and Virtual Machine Manager Servers groups have full access to the share on %ComputerName;. | |
| 836 | Unable to import virtual hard disk %FileName; because its differencing disk parent, %ParentFileName;, could not be found. | BLANK | |
| 837 | The library refresher did not import file %FileName; due to errors encountered while attempting to parse the file. | BLANK | |
| 838 | The library refresher failed to import file %FileName; because it does not have permissions to access the file. | BLANK | |
| 839 | The library refresher failed to import file %FileName; due to an unexpected error. | BLANK | |
| 840 | The library refresher could not process folder %FileName; because it does not have permission to access the folder. | BLANK | |
| 841 | The library refresher skipped %FileName; because its path length exceeds the maximum allowed length of %MaxLength; characters. | BLANK | |
| 842 | VMM cannot expand a virtual hard disk in the Library. | Expand the virtual hard disk on the virtual machine host instead. | |
| 843 | Unable to import %FileName; because one of its associated checkpoints could not be imported. | BLANK | |
| 844 | Unable to import the checkpoint %FileName; because no associated virtual machine could be imported. | BLANK | |
| 845 | The share path %FileName; is too long. | Verify that the fully qualified path to the share has fewer than %MaxLength; characters, then attempt to add it again. | |
| 846 | Unable to import %FileName; because a duplicate instance ID exists | Generate a unique instance ID by exporting the corresponding virtual machine. Try the operation again. |