Share via

How to configure RRAS based SSTP VPN server behind F5 BIGIP SSL load balancer

  • Article

Hello All,

In this blog, I will discuss how to load balance SSTP based VPN servers using a F5 BIGIP SSL load balancer.

Lets look at the deployment scenario first: You are having a pool of RRAS based VPN servers hosted behind F5 BIGIP load balancer. The F5 BIGIP load balancer terminates the HTTPS connections coming in from different SSTP based VPN clients, load balances the same by sending HTTP connections to one of the VPN server from this  pool of RRAS based VPN servers.

I will walk-through a sample lab set-up, however you can modify the same according to your own deployment.

Configuring F5 BIGIP

  1. Connect to F5 BIGIP management console web interface. Go to Local Traffic
  2. SSL Certificates: Import the SSL certificate that will be used during HTTPS negotiation. Please note: the subject name (CN) of the certificate should be same as the VPN destination name as configured inside VPN client. This can be either hostname or IP address – depending upon the VPN client configuration. Also note: The thumbprint of this certificate will be configured inside RRAS server (under Sha1CertificateHash and Sha256CertificateHash registry keys as given in step 3 under Configuring RRAS as SSTP VPN server).
  3. Profiles: Create two profiles: a) Name: SSTP_Http profile derived from the existing parent template `HTTP’.  This profile will be attached to the virtual server so that we can add an iRule to do HTTP filtering based on SSTP URI. b) Name: SSTP_Client profile derived from the existing parent template `ClientSSL’. This will be configured with the certificate imported in step 2 and will be used to terminate the HTTPS connections coming in from the client side.
  4. Nodes: Create nodes specifying IP address of each of the VPN servers (i.e. RRAS server’s IP address facing towards BIGIP or Internet).
  5. Pools: Create a pool with name SSTP-Pool that contains the node we created in step 4. Enter the name of the pool, add gateway_icmp health monitor, select the nodes and select the service port as 80 or any other value that is configured on SSTP based VPN server  to listen for incoming HTTP connections.
  6. iRules:   This is the best part of F5 BIGIP – without doing any firmware code change, we were able to get SSTP VPN server getting load balanced – by creating  a new iRule with name: SSTP_iRule as given in the end of this article.
  7. Virtual Server: Create a new Virtual server – name: SSTP_VirtualServer. Specify the destination IP address, service port as 443 (HTTPS), configuration as `Basic’. For HTTP profile – select SSTP_Http and SSL client profile – select SSTP_Client
  8. Resources: Add the iRule created in step 6 – i.e. SSTP_iRule to the virtual server.

Configuring RRAS as SSTP VPN server

  1. On WS 2008 or later OS, using Server Manager, install RRAS server role inside “Network Policy and Access server” node.
  2. Once installed, configure RRAS server as VPN server – using RRAS configuration wizard (details given in SSTP step-by-step guide -  in references).
  3. By default SSTP based VPN server is configured to listen for HTTPS connections coming in from VPN clients – however in this scenario it is required to be configured for accepting HTTP connections. To configure RRAS VPN server to listen for HTTP connections, configure UseHTTPS, ListenerPort, Sha1CertificateHash and Sha256CertificateHash registry keys (details given in KB947030 and KB947054). Basically – you need to specify UseHTTPS as 0 (i.e. listen for HTTP connections), ListenerPort as 80 or some other value on which you will like to listen on HTTP connections (the same MUST be set inside F5 pool), Sha1CertificateHash and Sha256CertificateHash with the thumbprint of the certificate installed on F5 BIGIP (which will be sent to the client during HTTPS connection establishment phase).
  4. Once you have set the regkeys, restart RRAS server.
  5. Follow the same steps on all the RRAS servers hosted behind F5 BIGIP (i.e. for all the nodes created on BIGIP).
  6. And you are all set-to-go and test the stuff.

Testing

  1. Create a SSTP VPN client on Vista SP1 or later OS – give the destination name as the name/IP address of F5 BIGIP virtual server. Note: This must be same as the subject name of SSL certificate installed on the F5 BIGIP SSL certificate.
  2. Install the trusted root certificate on the client machine
  3. Click connect. The HTTPS connection must go through F5 BIGIP virtual server terminating HTTPS connection and redirecting HTTP connection to one of the RRAS server.
  4. For further troubleshooting, look at F5 logs and RRAS event logs.

References

  1. Step-by-step guide: Deploying SSTP Remote Access
  2. KB947030: How to deploy SSTP based VPN server behind SSL load balancer
  3. KB947054: Registry entries that RRAS adds in WS08
  4. Here is the iRule with name SSTP_iRule that must be created on F5 BIGIP to redirect SSTP client connections to a pool of VPN servers:

##################################

when HTTP_REQUEST {

log local0. "HTTP Method: [HTTP::method]"

log local0. "HTTP URI: [HTTP::uri]"

log local0. "HTTP Host: [HTTP::host]"

log local0. "Content Length: [HTTP::header Content-Length]"

if { ([HTTP::method] eq "SSTP_DUPLEX_POST") and

([HTTP::uri] eq "/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/") } {

log local0. "Found SSTP Request, routing to sstp_servers pool"

pool SSTP-Pool

# disable the HTTP profile for the rest of the connection

HTTP::disable

} else {

log local0. "Non SSTP Request, dropping connection. You can change it according to your use"

drop

}

}

##################################

Cheers,

Samir Jain

Senior Program Manager

Windows Networking

[This posting is provided “AS IS” with no warranties, and confers no rights.]

Comments

  • Anonymous
    May 26, 2009
    The comment has been removed