Issues Uploading Large Files To SharePoint

Article
11/15/2012

To begin with, the Support for Large Files was one of the enhancements made in Windows SharePoint Services SP 1. By default, the maximum size for uploading files is set to 50 MB. The maximum file size that it can go up to is 2,047 megabytes.

Now it is obvious that any cap on the maximum file size will stop the users from trying to upload larger files (including me!). Though SharePoint is meant to handle files that are up to 2 gigs in size, it is not practically feasible and not recommended as well.

However, there are circumstances where files of much smaller size fail to upload which makes one wonder as to what could be the reason. Hence I decided to write this post for all those who have come across this issue and are looking for some options to work around it.

On a SharePoint server (WSS 3.0, MOSS 2007, SharePoint Server 2010 or SharePoint Server 2013) when we upload any document larger that 50 megs on any document library, we can encounter the following error messages

"An unexpected error has occurred"
"The page cannot be displayed”
"An unknown error occurred"
"HTTP 404 – Page Not Found”
“Request timed Out’

If you are using explorer view, the error message would be similar to

Could not find this item --> This is no longer located \\Servername\DavWWWRoot\team . Verify the item's location and try again".

Before we begin, I would like to mention that SharePoint is not really designed to handle huge files > 300 Mb). It stores all files in the content databases and that's where these large files are going. So I strongly recommend using file shares instead.

Going ahead, this can occur due to various reasons and I have listed a few of the possible causes and the workarounds for them

WORKAROUND(s)

Method 1 Increase the maximum upload size for the web application

Note : The default max single file upload size is 50 megs by default for a web application (in IIS 6.0) and 28 megs for IIS 7.0.

Go to 'Start > All Programs > Administrative Tools > SharePoint Central Administration > Application Management'.
Under SharePoint Web Application Management, click 'Web application general settings’.
On the Web Application General Settings page, choose the appropriate web application.
Under Maximum upload size, type the file size which you want to upload and click on OK. You can specify a maximum
file size up to 2,047 megabytes.

Note:

Any upload size which is below 50 megs is enforced directly through web app settings. Above 50 megs, you need to make a some small change to the web.config file to allow larger uploads. Repeat the steps listed below for all zones for your web app all the servers which host the web application role.

Open the web.config from 'C:\Inetpub\wwwroot\wss\VirtualDirectories\<Virtual Directory> ' folder and modify it as follows

<httpRuntime maxRequestLength="51200" /> with <httpRuntime executionTimeout="999999" maxRequestLength="51200" />

Perform an IISReset and you should be good to go.

See <httpRuntime> element in web.config for more information.

Method 2 Increase the connection time-out setting in IIS

While uploading large files, there are chances that the request will timeout. By default, the IIS connection time-out setting is 120 seconds. Follow these steps to increase the connection time-out setting,

Click Start, point to All Programs, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.

Right-click the virtual server that you want to configure, and then click Properties.

Click the Web Site tab. Under Connections, type the number of seconds that you want in the Connection time-out box,
and then click OK.

Method 3 Increase the maximum upload size in the web.config file of web application

By default, the web.config file is located in the 'C:\Inetpub\Wwwroot\Wss\Virtual Directories\<Virtual Directory>' folder. Add the following configuration to the web.config, just before the <configuration> section closes out.

Here’s a screenshot of the web.config file after the change:

This sets the value of the maxAllowedContentLength property to 52428800 (in bytes) for the web application only.

See KB944981 - You cannot upload files that are larger than 28 MB on a Windows Server 2008-based computer that is running Windows SharePoint Services 3.0.

Note:

The following information is applicable to IIS 7.0 and suggests making a change to the ‘applicationhost.config’ file which is a core configuration file for IIS. For more information, see

Error message when you visit a Web site that is hosted on a server that is running Internet Information Services 7.0: "HTTP Error 404.13 - CONTENT_LENGTH_TOO_LARGE".

The maxAllowedContentLength property specifies the maximum length of content in a request in bytes and it needs to be set on a Windows Server 2008 computer that has IIS 7.0-only installations. To change the value of the property, do the following

Open command prompt and go to 'C:\windows\system32\inetsrv' directory
Run the below command

appcmd set config /section:requestfiltering /requestlimits.maxallowedcontentlength:unit

where the variable "requestlimits.maxallowedcontentlength" unit specifies the maximum length of content.

For example, to specify 2000000000 as the maximum length of content, type the following at the command prompt, and then press ENTER:

appcmd set config /section:requestfiltering /requestlimits.maxallowedcontentlength:2000000000

Perform an IISreset /noforce.

More info is available at

Configure Request Filters in IIS 7

What is RequestFiltering?

Method 4 Increase the default chunk size for large files

The large-file-chunk-size property sets the amount of data that can be read from server running SQL Server at one time.

If you have a file that is greater than your chunk size (such as 70 MB when the chunk size is set to 5 MB), the file would be read in 14 chunks (70 / 5).
The chunk size is not related to the maximum upload file size.
The chunk size simply specifies the amount of data that can be read from a file at one time. By default, the large-file-chunk-size property is set to 5 MB.
Check if the 'large-file-chunk-size' property is set or not

Stsadm -o getproperty -propertyname large-file-chunk-size

In order to set the large–file–chunk–size property, we need to use the command line. This property is configured for a server or server farm, and cannot be configured for an individual web app server. To set this property, use the following syntax:

Stsadm.exe –o setproperty –pn large–file–chunk–size –pv <size in bytes>

More on this command is available at Large-file-chunk-size: Stsadm property (Office SharePoint Server)

After making a change to this property, perform an IISreset /noforce.

See What is the maximum value one can set for the Large-file-chunk-size ?

Method 5 Add the executionTimeout value

Increase the execution timeout for the upload page (upload.aspx) to prevent timeouts on the page. The default timeout for ASP.NET 2.0 is 110 seconds, so any uploads that are taking longer than that will result in a request failure. Add the executionTimeout value to web.config in the 'C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS' folder and the ‘C:\Inetpub\wwwroot\wss\VirtualDirectories\<Virtual Directory>' folder.

Navigate to 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\TEMPLATE\LAYOUTS' folder on the SharePoint server.
Open the 'web.config' file in notepad or any other text editor and add the executionTimeout parameter. For example, replace the value as follows

Existing code

 <location path="upload.aspx">
     <system.web>
       <httpRuntime maxRequestLength="2097151" />
     </system.web>
 </location>

Replacement code

 <location path="upload.aspx">
     <system.web>
       <httpRuntime executionTimeout="999999" maxRequestLength="2097151" />
     </system.web>
 </location>

Open the 'web.config' file from the 'C:\Inetpub\wwwroot\wss\Virtual Directories\<Virtual Directory>'folder and modify it as follows

Existing line : <httpRuntime maxRequestLength="51200" />

Replacement line : <httpRuntime executionTimeout="999999" maxRequestLength="51200" />

Modify the web.config located in "12\CONFIG" folder

Navigate to 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\TEMPLATE\CONFIG' folder on the SharePoint server and modify the 'maxRequestLength' property which by default is set to the following

<httpRuntime

maxRequestLength="51200"

/>
Open the 'web.config' file in notepad or any other text editor and modify the value to match the other web.config files
Save the file and perform an 'IISreset /noforce'.

Antivirus Exclusions

Make sure you have added Antivirus exclusions as per https://support.microsoft.com/kb/952167

ASP.Net Session State

Open IIS manager, expand the 'Sites' node and select the SharePoint site
Click on 'Session State' under 'Application Development' and verify that the 'Timeout' value is set to '120' minutes

You can also verify this from the web.config file

What is ASP.Net Session

ASP.NET session state enables you to store and retrieve values for a user as the user navigates the different ASP.NET pages that make up a Web application. HTTP is a stateless protocol, meaning that your Web server treats each HTTP request for a page as an independent request; by default, the server retains no knowledge of variable values used during previous requests. ASP.NET session state identifies requests received from the same browser during a limited period of time as a session, and provides the ability to persist variable values for the duration of that session.

See ASP.NET Session State for more information

Explorer view or Web client issues

While trying to use the explorer view, you may see the following error despite making the aforementioned changes

“Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved” message

If this is the case then the issue is most likely caused by a local restriction set on Web Client service. By default, Web Client file size limit is set to around 47 Mb. To increase this limit:

Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate the following registry key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClientParameters
Right click on the FileSizeLimitInBytes and then click Modify.
In the Value data box, click on Decimal, and type 4294967295 and then click OK.
Quit Registry Editor
Restart Web Client service from Services.msc

Large file Support Limitations

The following features do not support files larger than 50 MB

Virus checking
Streaming files
Client-side restoration of smigrate backup files (limited to 2 GB). The manifest files for an smigrate backup cannot be larger than 2 GB (SPS)
Site templates (limit of 10 MB per site template, including content).

NOTE:

As mentioned earlier, I would like to mention that SharePoint is not really designed to handle huge files > 300 Mb). It stores all files in the content databases and that's where these large files are going. So I strongly recommend using file shares instead.
Also be aware that increasing you upload file size to 2 GB has performance ramifications so it a user uploads a file and there is no memory available no new requests can be handled until the memory is available again.

Additional Info

Comments

Anonymous
January 01, 2003
i think the max. file size is 250 MB not 50 MB.http://technet.microsoft.com/en-us/library/cc262787.aspx
Anonymous
January 01, 2003
Nice post
Anonymous
January 24, 2013
"Before we begin, I would like to mention that SharePoint is not really designed to handle huge files > 300 Mb). It stores all files in the content databases and that's where these large files are going. So I strongly recommend using file shares instead." While it makes sense that in a default install all data is put in a content database and this is undesirable for reasons of performance and DB size I wouldn't put things in file-shares (thus outside of SharePoint) but instead enable Remote Blob Storage - SharePoint 2010 comes with Filestream support built in and other providers can be configured: technet.microsoft.com/.../ee748638(v=office.14).aspx
Anonymous
September 12, 2013
Your post is very helpful but I have a user getting the file size error even though the file she is trying to upload is only 1/2 meg - WELL below the 50 meg limit.
Anonymous
December 17, 2013
This is very helpful and thorough. However, it makes me wonder: "What was Microsoft thinking!?" Couldn't they have foreseen that SharePoint may need to be used with larger files? Why didn't they simplify this process and make it idiot proof?
Anonymous
July 28, 2014
I tried all the workarounds mentioned but still i couldn't upload files >28 MB...
Anonymous
September 09, 2014
I used GoodSync and upload and sync by way of WEBDAV connection works perfect and ignores character issues also
Anonymous
October 16, 2014
Surya >> I faced the same issue too. I did some testing in my environment previously and concluded that the actual file size that can be uploaded is about half of the limit. This means 50mb limit can allow up to 28mb. For 100mb limit, it can allow up to 56mb etc...
Anonymous
May 27, 2015
If your SharePoint WFE is running out of disk space, you may also have problems uploading files to SharePoint, even if all of your settings are correct.

Share via