Incorrect solution build ordering when using MSBuild.exe
We've had a few reports of cases where Visual Studio, and previous versions of MSBuild, will build the projects in the solution in the correct order, but the 4.0 version of MSBuild.exe gets the order wrong.
Here's a full description of what's going on, why it began in 4.0, and the fix we recommend to your projects to solve the problem. If you're not interested in the "why", skip ahead to the workaround.
Archetypical case exhibiting the problem
This diagram shows a solution file containing three projects, A, B, and C. Let's say they are C# projects.
A has a regular project reference to B, so it will invoke B, then when B comes back done, it will build itself. At the same time in the solution file, there is a manually specified dependency: B depends on C.
I've shown regular project references with solid lines, and the information in the solution with dotted lines.
This manually specified dependency was set up in the solution by right clicking on the solution and choosing Project Dependencies…, then checking a box. Below I've shown the context menu and what you see in the dialog when you have this setup.
The build ordering you expect here is C, then B, then A, and Visual Studio shows that correctly in the Build Order tab, as you see below.
Of course a real case would have more projects in it, but it would boil down to this case.
Why does this happen (skip ahead if you just want the "fix")
Essentially the problem is that MSBuild doesn't know anything about the project files until it starts to build them.
Solution files, as you know, are not in MSBuild format (yet). On the command line, MSBuild.exe is on its own, so it parses them and generates one or more in-memory MSBuild format files that are essentially a translation. If you want to see these ugly files, set an environment variable MSBUILDEMITSOLUTION=1 then build the solution. You'll see a .sln.metaproj file emitted next to your solution file, and possibly one or more files with an extension like .csproj.metaproj next to some of your projects.
The .metaproj generated for B.csproj is how MSBuild makes sure that the solution dependency is respected -- at least, it's created so that the solution itself does not invoke B until C is built. It does this by invoking the B metaproj instead of B directly, and in the B metaproj, it builds C before B. This is exactly equivalent to someone going into B and adding a project reference to C, instead of a solution dependency, but it means that we don't have to edit the B project directly.
Here's what it looks like after this translation:
Why doesn't that work in this case? In short, the problem is the project reference from A to B. Here's what happens: the solution invokes A.csproj, B.metaproj, and C.csproj concurrently (or at least, in undefined order), which would normally be fine. B.metaproj invokes C.csproj, and waits, then invokes B.csproj. However in the meantime, A.csproj was invoked, and because it has a project reference to B.csproj, it invokes B.csproj -- it "goes around the back". C.csproj hasn't necessarily built yet, so the build breaks.
Why did this work in previous versions of MSBuild?
In previous versions, we loaded and scanned every project file listed in the solution, and any they referenced, in order to draw a complete graph. Then we used the graph to create the MSBuild format equivalent of the solution file. The reason we did all this scanning was not actually to address this problem, it was to make interop with old-style non-MSBuild VC projects (".vcproj") work correctly. It was also slow, especially for large solutions.
In VS2010, VC projects converted to MSBuild, so in 4.0 we took out this complex interop code. After making .metaproj's to express any dependencies stored in the solution file, we could now simply invoke all the projects in the solution and the build would order itself. That was potentially much faster, because we didn't need to load any projects (potentially hundreds) to scan them before building anything. (Of course, when MSBuild 4.0 is fed a VS2005 or VS2008 solution file, it still calls into the old code in the old assembly to do it the old way, since they may contain .vcproj's. So those guys don't have this problem.) The oversight was this case -- where a project reference "goes behind the back" of a solution-expressed dependency.
To fix this we would have to revert to loading and scanning, which slows things down -- the correct approach is to use project references instead of solution dependencies, as I explain below.
How to fix this
Follow this principle: do not use dependencies expressed in the solution file at all! Better to express dependencies in the file that has the dependency: put a project reference in the project, instead. In our example, that would be a project reference from B to C.
You may not have done that before because you didn't want to reference the target of the project reference, but merely order the build. However, in 4.0 you can create a project reference that only orders the build without adding a reference. It would look like this - note the metadata element, and all this is inside an <ItemGroup> tag of course:
<ProjectReference Include="... foo.csproj">
<ReferenceOutputAssembly>false</ReferenceOutputAssembly>
</ProjectReference>
Note that you have to add the child element with a text editor -- Visual Studio can add a project reference, but doesn't expose UI for this metadata.
I can tidy up by removing the dependency in the solution file as well - removing now-unnecessary lines like this -- your GUID will be different, but use the VS dialog and it will do the job.
ProjectSection(ProjectDependencies) = postProject
{B79CE0B0-565B-4BC5-8D28-8463A05F0EDC} = {B79CE0B0-565B-4BC5-8D28-8463A05F0EDC}
EndProjectSection
If you're using C++ projects, you are less likely to have this problem, because in the upgrade process that converts .vcproj's to .vcxproj's, it moves any solution dependencies relating to them to project references for you. However, if you do, there's a similar fix. For C++/CLI project references to other managed projects, use project references like the one above. For the equivalent situation with a project reference to a static lib, where you want a project reference without linking in the referenced lib, the metadata you want is
<ProjectReference Include="... lib.vcxproj">
<LinkLibraryDependencies>false</LinkLibraryDependencies>
</ProjectReference>
Summary
Although it's tiresome to have to edit your projects in this way to make the bug go away, it's a best practice to use project references instead and consider the solution file merely a "view", and you'll end up with projects that if you want can be built without a solution file.
Post Script
I know of one other, more obscure and completely different case, where MSBuild 4.0 does not order correctly but Visual Studio does. This can happen if you have web application projects, AND you build with 64 bit MSBuild (which is the default, in Team Build 2010). I won't go into the tedious details but the fix is to do one of these things: (1) set a property or environment variable named MSBuildExtensionsPath to C:\program files (x86)\msbuild or (2) Build with 32 bit MSBuild, which I recommend in general for other reasons or (3) copy the web application targets files under the 64 bit program files MSBuild folder to the equivalent location in the 32 bit program files MSBuild folder.
If you find any other case where the solution is not ordering correctly yet this workaround does not work, that's interesting. Please make a minimal repro like the one in this bug, and send it to Dan atmsbuild@microsoft.com.
Dan
Update (12/25)
Luc C points out below that sometimes removing a project reference in favor of a new solution dependency reference is an alternative solution. That assumes you're only using the project reference for ordering , or you replace it with a file reference. Still, I do recommend project references in general, on the principle of "express the dependency in the place it applies" – you can look at the project and see that the dependency is correct, and you can include the projects in more than one solution easily.
Luc also points out the case of a managed project depending on a non-CLR native project (presumably for PInvoke). In my experiments, VS will let you add a project reference, albeit with an ugly bang, and it will do the ordering correctly, as will msbuild.exe.
Comments
Anonymous
February 09, 2011
When building VS2005 sln / projects this didn't help. We had to stick the dependency info into the sln file. This is covered here: social.msdn.microsoft.com/.../01a0a7c6-b9ab-40cd-903a-a4a0b5eb2882Anonymous
August 11, 2012
The comment has been removedAnonymous
April 16, 2013
We think we are observing this in VS 2012. Should we assume it's not fixed in VS 2012? This is a horrible bug.Anonymous
September 25, 2013
Hi all, Well, what is presented as a feature for MSBuild 4.0 (ignoring solution dependencies) is presented as a bug which has been fixed in MSBuild 4.5 by other Microsoft people!! MSBuild 4.5 reads again both types of dependencies :-( and I must say, this is a very BAD idea! FredAnonymous
January 23, 2014
Its not fixed in MSBuild that goes with Visual Studio 2013 again.Anonymous
May 14, 2014
Yeah, believe I am facing something very similiar in VS2013 and WiX.Anonymous
May 15, 2014
I've updated to VS2013 and .net 4.5.2 and this is still a problem, we have a soln with 26 projects. Building in VS is fine but not with C:WindowsMicrosoft.NETFramework64v4.0.30319MSBuild.exe