Share via

Snazzy OSD status with BGInfo

  • Article

This Blog post was created by Michael Schmidt.

Controlling the look and feel throughout OSD a very important part of creating a good user experience. Not only is the out-of-box experience a bit bland, it’s unfamiliar and confusing to someone who’s never experienced OSD before. Our goal in this article is to outline how to spice up the end-to-end deployment experience.

At a glance, a user should be able to tell:

  • What’s going on?
  • Where am I in the overall scheme of things?

Should the deployment go awry, these questions become even more important. In one glance, without looking at logs, anyone viewing the screen can answer questions such as:

  • Where did the machine fail?
  • What is the machine name?
  • Does it have an IP address?
  • Etc…

With BGInfo, the available information to display is nearly limitless; you have complete control over what details are visible and important to your organization.

A mockup of what might be used to accomplished this goal is shown below:

image

 

Showing Status

All this is possible through the use of BGInfo. With this utility, the background screen can be changed at any point in your Task Sequence.

In the mockup provided, the following practices were taken:

  1. Branding was provided to create familiarity and provide context for what is taking place
  2. Progress was grouped into 5 phases: System Backup, Install Image, Windows Setup, Install Applications, and Restore Backup
  3. One background bitmap was created for each phase; each time a phase completes, the background is changed

So, in the example given, 5 bitmaps were created. Thus, BGInfo will be called 5 times within our Task Sequence. Each bitmap represents the active “Phase” in an “On” position, and all other “Phases” in an “Off” position.

 

Creating Status Backgrounds

Since our deployment consists of 5 phases, we’ll need 5 different bitmaps. In addition to 5 different bitmaps, we actually need 5 BGInfo configuration files. BGInfo configuration files store rendering information used to display the background; these files are passed to BGInfo as parameters. 

To create a screen, open BGInfo and:

  1. Choose a background image to use
  2. Choose what computer information to display
  3. Format/Justify/Center as preferred

Defining the background image to use, color, and positioning:

image 

Defining what computer information is displayed, and where to position it:

image

Create all 5 pages in this manner, and save each BGInfo session. After completing these steps, the final list of files will look something like this:

image

 

Setting up the Task Sequence

Assuming all the required files exist in one directory, a method for calling the appropriate “Step” is necessary. This can be accomplished through a batch file containing the following:

  • "%~dp0bginfo.exe" "%~dp0step_0%1.bgi" /nolicprompt /silent /timer:0

In this manner, your Task Sequence would simply reference the package and call the batch file with a Step number:

image 

 

Maintaining Look & Feel

To maintain the look and feel across the entire deployment, there are three areas where adjusting the background image is important for consistency:

  • Task Sequence Wallpaper set through BGInfo (already covered)
  • Windows PE Wallpaper contained in the Boot Image
  • Windows Setup Phase Wallpaper

 

Boot Image

When initially starting up in Windows PE, a default built-in background image is displayed. Until your Task Sequence begins and the background batch file runs, a user will see whatever background ships in Windows PE.

Apply your own background by opening up the SCCM console, locating your boot image, and modifying its properties. Look for the “Windows PE Background” field:

image

 

Windows Setup

After applying and booting into it the new OS (after the “Setup Windows and ConfigMgr” step), an animated black background will appear for the duration of your Task Sequence. Windows Setup overlays a full-screen window named “FirstUXWnd” , displaying the text “Setup is preparing your computer for first use”. Until the Task Sequence has completed in its entirety, this window will be seen and the custom background will not.

Task Sequence background after booting into the new OS:

image

Assuming you’ve customized the first half of your Task Sequence to show a snazzy look/feel, you’ll probably want to persist this. Especially if your Task Sequence contains a large number of post-OS-install tasks, such as application installs.

One simple and safe workaround is to hide this window. Since we know the window title, we can simply search for it and send it a “hide window” message. However, this requires creating a small application to perform the hide.

Creating this application isn’t too difficult. An example of the API calls necessary to perform this is given below. Using either .NET or native C++, this is relatively simple to create.

  1. Enumerate all windows (EnumWindows)
  2. Search for the window titled “FirstUXWnd” (GetWindowText)
  3. Set the window state to “Hidden” (ShowWindow SW_HIDE | SW_SHOWNORMAL)

Once completed, run this binary from your Task Sequence immediately after the “Windows Setup and ConfigMgr” step.

Update! A complete source-code sample is available here.

You now completely control the deployment look and feel, end-to-end.

Comments

  • Anonymous
    January 01, 2003
    Just adding a little bit of info to this already great post. In the new release of MDT (2012), BGinfo64.exe is added within the Tools folder (Templates/Distribution/Tools/x64). This can then be used to make a similar customization for x64 WinPE. Also it provides an executable named "WindowHide.exe", which allows you to do exactly what's stated in the very last section of this post, hide a Window, considering the link to the sample does not work. Kind regards, Stephan

  • Anonymous
    January 01, 2003
    Hi! Have you been able to get this to work in "Windows Server 2012", "Windows Server 2012 R2" and "Windows 8.x" ?

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    June 16, 2010
    The link to the source code is broken.  Do you have another place where I can get this?

  • Anonymous
    September 10, 2010
    After my XP to Win 7 migration the user logs on and the default wall paper is set to the OSD BGINfo Setup_05.BMP and the windows theme shows up as unsaved theme

  • Anonymous
    March 20, 2014
    I am facing a problem where after booting into WinPE and starting a task sequence, the background will disappear or not show at all, however the hardware info will be displayed. Note, I am using vbscripts and not the built in options of BGinfo. additionally this is running on Windows Server 2012 R2. Before I used this on Windows 7 64-bit and was functional. If someone could shed some light on this, it would be appreciated.

  • Anonymous
    March 24, 2014
    This does not work in windows 8. Anyone else able to get it to work?

  • Anonymous
    October 08, 2014
    The comment has been removed

  • Anonymous
    October 13, 2014
    I have created all steps in task sequence,
    but after finish deployment when pc reboots the last step images sets on background permanently, i have to change it manually through personalize.

  • Anonymous
    October 15, 2014
    It works fine but i want to display the OSDComputername and not the Hostname which is the "mini-...." at the background. Is there a way to get the OSDComputername instead of the ?

  • Anonymous
    October 15, 2014
    The comment has been removed

  • Anonymous
    November 22, 2014
    Nice job explaining this, pretty simple to add and really makes for a much more professional look, nice!

  • Anonymous
    May 06, 2015
    @mmarkt - yes you can have BGinfo display the OSDComputerName.
    You need to create a custom field in BGinfo, using a VBS script located in the same folder as BGinfo.

    Script that I used is here:
    https://sccmguru.wordpress.com/2015/04/17/display-correct-computer-name-during-osd/

    It works fine in WinPE - but Ive been unable to get the custom wallpaper to display once in Windows 8.1.
    I use "ztisetbackground.wsf" which includes a section to hide the "FirstUXWnd" window, but doesnt seem to be working.

  • Anonymous
    August 06, 2015
    Does anyone still have (Update! A complete source-code sample is available here.) location? It is stating the link is broken and I'd like to be able to persist the background in Win8.1 deployments.

  • Anonymous
    August 06, 2015
    The comment has been removed

  • Anonymous
    August 13, 2015
    I have put together a solution which works all the way through the build in Windows 7, 8 and 10 and is available on Technet gallery.

    https://gallery.technet.microsoft.com/SCCMMDT-OSD-Status-175c90fe

    Hope this helps,
    Shaun