SCCM client deployment

Question

Client not running/receiving CCM setup.

When i deploy client to any host ,and then check the client for any software center application ,i wont see it.

i go to services i see ccm setup services running what could be the issue for failed installation of cleint application?

Answer 1

Your log says... "GetDirectoryList failed with a non-recoverable failure, 0x87d0027e" and "Failed to get directory list from 'http://Your.F.Q.D.N/CCM_Client'. Error 0x87d0027e" and "Accessing the URL 'http://Your.F.Q.D.N/CCM_Client/ccmsetup.cab' failed with 87D00215" . That all points to your Management Point not being able to offer the client setup files and/or permissions.

If I were you, I would try adding a 2nd Management Point, on a completely different server, and remove the one on Your.F.Q.D.N current server. If that is NOT an option (you only have 1 server), I would completely remove the Management Point, reboot the server, then re-add the Management Point, AND of course, monitor the logs for the MP install.

But, I'm not you. If that reinstall doesn't work, open a case with Microsoft to determine what may or may not be configured correctly on your Management Point configuration.

Answer 2

Hi,

Thanks for posting in Microsoft MECM Q&A forum.

1,Please help check the ccmsetup.log and ccm.log to see if there is any further information.

2,Can we manually install the SCCM client agent on these few computers?

3,Please make sure at least one Client Push Installation account has been defined in the Accounts tab of the Client Push Installation Properties dialog box. And this account must be a member of the local Administrators group.

4,Please check your boundaries and boundary groups configurations, and associate your MPs and DPs to the boundary groups. Also make sure your Firewall doesn't block the communication between the client and site system servers.

For more detailed troubleshooting steps, please refer to the helpful article:

Troubleshooting SCCM ..Part I (Client Push Installation )

Thanks for your time. Have a nice day!

Best regards,

Simon

---

If the response is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

Answer 3

Hi,

Thank you for your reply.

1,Agree with @Sherry Kissinger here. You can try to reinstall the MP or add a secondary MP.

2,We can check the log file ConfigMgrSetup.log located in C drive to see if there is any issue during installation. Also make sure the required Web Server IIS Prerequisites are selected during installation. Here is a step by step SCCM installation guide for your reference:

SCCM 1902 Install Guide Using Baseline Media

Similar thread for your reference. After installing the server roles in above article, it works OK.

CCMSETUP cannot access /CCM_Client application because it doesn't exist

Thanks for your time. Have a nice day!

Best regards,

Simon

---

If the response is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.