Upgraded our ExpressRoute circuit from 2Gb to 10Gb but stuck at 2Gb
We have a 10Gb ExpressRoute circuit from our provider that we have had configured at 2Gb inside Azure. We now have a need for the full 10Gb bandwidth, so we have changed from 2Gb to 10Gb within the Azure ExpressRoute configuration, and changed our…
Nginx Proxy Manager
Hi, Connecting to azure with Nginx Proxy Manager from internet with https trying to reach the Nginx server that is hosted in on-prem which is an directly connected ExpresssRoute between my azure and on-prem environment. So far i can connect to Azure but…
ExpressRoute Not Advertising VNet CIDRs to AWS
Hello Azure Support Team, I have an ExpressRoute circuit named btcturk-global-circuit in the West Europe location (Resource Group: Pending). It is linked via Azure Private Peering to an AWS Direct Connect VIF. The BGP session is up and stable, and from…

Migrating to ExpressRoute Metro
Migrating to ExpressRoute Metro: We have a ExpressRoute Standard in West Europe and plan to opt for Metro (High resilency) however I would like to understand the following: This will require to create a new ExpressRoute circuits with Metro( High…
Action required for your ExpressRoute Gateway deployment
Hello! I was contacted regarding the message I’ve shared below. My question is: Should I only recreate the connections in the circuit, or do I need to recreate anything else? If there’s a guide available, I’d appreciate it if you could share it, so I…
Help with upgrading ExpressRoute circuit from 2Gbps to 10Gbps
We have a 10 Gb circuit from our provider, and currently have the Azure side configured as 2000 Mbps. We are also using the ErGw2AZ sku on the virtual network gateway. We are wanting to upgrade to 10 Gb within Azure, but I wanted to make sure I am not…
Action required for your ExpressRoute Gateway deployment
We received a notice requiring deletion and recreation of our ExpressRoute Gateway connections. Are there any instructions on doing this? Is this our ExpressRoute circuits that need to be deleted and recreated. Thanks for any direction.
Express Route and VPN together
Our scenario: We are planning to use Express Route, VWAN integrated with Azure Firewall in East US (primary site) and West US (secondary/DR site) and we will be connecting the on-premise data center with Express Route. Questions: If we are using the…


Can I have an ExpressRoute's Resoruce Group in another region from where it physcially terminates?
I have an ExpressRoute circuit that physically terminates in Canada Central. However, the resource group for the ExpressRoute circuit is in North Central US. My ExpressRoute Gateway is in Canada Central and peering seems to be okay. At least that's what…
azvpn->expressroute->on-prem
Hi, I'm using azvnp to vpn to azure. I have an expressroute directly connected to my on-prem out of azure. bgp is used to route and is working for the other vnet in azure however, i don't see my network within that bgp routing. I want to hop through…
MultiTenant VNet Peering using (ASO) and Managed Identity
Question: How can I set up virtual network (VNet) peering between Tenant A and Tenant B using Azure Service Operator (ASO) and ASO using Managed Identity (via workload identity) ? How can we do vnet link to ER Circuit running on different tenant using…
Multiple On-Prem VPN Devices Over ER to Azure VPN Gateway
Is it correct that by following the article linked below, only one tunnel will be active at a time for the "Multiple on-prem VPN Devices"…
How to become Express Route connectivity Partner ?
Hi there, As title, I'm currently using a basic support plan on AZURE but I want to become a connectivity partner. However, there isn't any matching option that I can choose while I'm following the instructions to create service support via…
is Microsoft peering supported on vwan express route circuit and VNG ?
There is no mention of MS public peering on vWAN documentation. So trying to figure out. does vWAN express route support MS peering (to inject MS public IPs into on-prem Networks connected via express route circuit MS peering). If this is supported…
Become express route service provider
We are interested in becoming an ExpressRoute provider as described in the link below. As mentioned @Anonymous kindly share an internal alias for…
Deploying an Azure ExpressRoute Gateway with High Availability and Resiliency in Canada East Region
Is it possible to deploy an Azure ExpressRoute Gateway with high availability and resiliency by distributing it across multiple availability zones in the Canada East Region? If so, why?
Potential Impact on Existing ExpressRoute Availability When Setting Up New ExpressRoute at Same Peering Location
We currently have an ExpressRoute set up with the peering location in Montreal and resources in Canada East. We are planning to set up a new ExpressRoute using the same peering location for use in Canada Central. (Keeping the old one) Our ISP (RISQ) is…
Azure private link can connect to service which out side Azure environment
From the document able to understand azure private link mainly using to connect between service within in any azure virtual network to other azure service out side the network securely without traveling traffic through internet. So with the same feature…

Lumen/CenturyLink ExpressRoute Connection Confusion
Hello All: I have a situation here where my service provider (Century Link/Lumen) is not providing me with any help. I am in the process of setting up Express Route Circuit with Microsoft and make it work. I have a test circuit provisioned and it is…
AZVPN/EXPRESSROUTE
Hi, i would like to connect as a telecommuter with AZVPN to Azure through ExpressRoute to my onprem. How can i do that?