configuration of a new device not possible ?

Question

Hello,

I use raspberry and I wanted to create a new SD card via Windows 10 iot dashboard.

So I go to the configure a new device section, enter the required elements and click on download and install.

But I always get a 404 error. The source seems to be unavailable. Would you please have a solution for me?

Answer 1

Windows IoT Core has been in processed of being phased out. There is only support for those who have built products with the LTSC version. The non-LTSC downloads are probably gone now.

https://learn.microsoft.com/en-us/lifecycle/products/?terms=windows%20IoT%20Core

Answer 2

Hello

Thank you for posting in Q&A forum.

Here are a few steps you can try to resolve the 404 error:

1. Ensure your internet connection is stable and there are no network issues that might be causing the 404 error.
2. Make sure you have the latest version of the Windows 10 IoT Dashboard installed. Sometimes, older versions might have issues accessing the necessary resources.
3. Sometimes, the 404 error might be due to temporary server issues on Microsoft's end. You can check forums or Microsoft's support page to see if others are experiencing similar issues.
4. If possible, try using a different PC to see if the issue persists. This can help determine if the problem is specific to your current setup.

I hope the information above is helpful.

If you have any questions or concerns, please feel free to let us know.

Best Regards,

Daisy Zhou

============================================

If the Answer is helpful, please click "Accept Answer" and upvote it.