Server2025 installation on physical host is stuck

Jonas Meister 0 Reputation points
2024-12-03T11:59:21.0666667+00:00

Hey guys

The Situation:

I downloaded the evaluation ISO from Microsoft's official website.

I attempted two different methods to perform the upgrade:

In-place upgrade on the existing OS: The process ran up to 100%, the server restarted, but then it got stuck on the Windows logo with the spinning circle.

Booting from USB or Virtual Media (via Intel BMC): Both methods produced similar behavior. The POST process completes, the ISO begins loading (black screen with a loading bar), and then it transitions to the Windows logo with the spinning circle. At this point, the process stalls indefinitely, with no further progress.

Current Status:

The server is currently running Windows Server 2022, and this OS is functioning without any issues.

Any advice on how to resolve this behavior would be greatly appreciated.

Hardware

To get specific:

TERRA SERVER 7220 G3

Intel® Server Board S2600WFT

2x CPU Intel XEON Gold 6148/20x2.4 GHz/27.5MB/150W

16x RAM DDR4 LR REG 64GB / PC2666/ECC/ Samsung (4Rx4)

2x SSD 2.5" 1.6TB Seagate ST1600FM0013 SAS3/ME/512e##

  • Tried as ahci drive and with vroc raid

BC MegaRAID 9460-8i PCIe x8 SAS 8 HDD sgl.

  • just plugged in

BC MegaRAID 9460-16i PCIe x8 SAS 16 HDD sgl.

  • just plugged in
Windows Server Setup
Windows Server Setup
Windows Server: A family of Microsoft server operating systems that support enterprise-level management, data storage, applications, and communications.Setup: The procedures involved in preparing a software program or application to operate within a computer or mobile device.
259 questions
{count} votes

1 answer

Sort by: Most helpful
  1. Daisy Zhou 26,871 Reputation points Microsoft Vendor
    2024-12-04T07:45:36.83+00:00

    Hello

    Thank you for posting in Q&A forum.

    Here are some steps you can try to resolve these issues:

    1. Check Hardware Compatibility:

    • Ensure that your hardware meets the minimum requirements for Windows Server 2025.

    • Verify that your BIOS/UEFI firmware is up to date.

    1. Limit Logical Processors:

    • If your server has more than 256 logical processors, limit the number to 256 or fewer. You can do this by entering the UEFI setup during boot and adjusting the settings

    1. Disable Unnecessary Hardware:

    • Disconnect any non-essential hardware components (e.g., additional storage drives, external devices) during the installation process.

    Reference:

    Resolved issues in Windows Server 2025 | Microsoft Learn

    I hope the information above is helpful.

    If you have any questions or concerns, please feel free to let us know.

    Best Regards,

    Daisy Zhou

    ============================================

    If the Answer is helpful, please click "Accept Answer" and upvote it.


Your answer

Answers can be marked as Accepted Answers by the question author, which helps users to know the answer solved the author's problem.