Database Engine events and errors (2000 to 2999)

This article contains error message numbers (between the range 2,000 and 2,999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 2,000 and 2,999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (2000 to 2999)

Error	Severity	Event logged	Description
2001	10	No	Cannot use duplicate parameter names. Parameter name '%.*ls' listed more than once.
2002	16	No	Cannot create a procedure for replication with group number greater than one.
2003	16	No	Procedures with a group number cannot have parameters of XML, CLR or encrypted types. Parameter '%.*ls' of procedure '%.*ls' has type '%ls'.
2004	16	No	Procedure '%.*ls' has already been created with group number %d. Create procedure with an unused group number.
2005	16	No	The table '%.*ls' is unavailable and needs to be rebuilt. Rebuild the table offline.
2007	10	No	The module '%.*ls' depends on the missing object '%.*ls'. The module will still be created; however, it cannot run successfully until the object exists.
2008	16	No	The object '%.*ls' is not a procedure so you cannot create another procedure under that group name.
2009	10	No	Procedure '%.*ls' was created despite delayed name resolution warnings (if any).
2010	16	No	Cannot perform alter on '%.*ls' because it is an incompatible object type.
2011	16	No	Index hints within a schema-bound object can be applied only to memory optimized tables.
2012	16	No	Variables of CLR type cannot be declared within schema-bound object.
2013	10	No	Warning: 'is_ms_shipped' property is turned off for %S_MSG '%.*ls' because you do not have permission to create or alter an object with this property.
2014	16	No	Remote access is not allowed from within a schema-bound object.
2020	16	No	The dependencies reported for entity "%.*ls" might not include references to all columns. This is either because the entity references an object that does not exist or because of an error in one or more statements in the entity. Before rerunning the query, ensure that there are no errors in the entity and that all objects referenced by the entity exist.
2021	16	No	The referenced entity '%.*ls' was modified during DDL execution. Please retry the operation.
2022	16	No	Parsing errors were encountered in the %S_MSG '%.*ls'. The dependencies referenced from this object could not be determined.
2023	10	No	Metadata was not updated for the schema-bound object '%ls'.
2101	14	No	Cannot %S_MSG a server level %S_MSG for user '%.*ls' since there is no login corresponding to the user.
2102	16	No	Cannot %S_MSG %S_MSG '%.*ls' since there is no user for login '%.*ls' in database '%.*ls'.
2103	15	No	Cannot %S_MSG trigger '%.*s' because its schema is different from the schema of the target table or view.
2104	14	No	Cannot %S_MSG the %S_MSG '%.*ls', because you do not have permission.
2108	15	No	Cannot %S_MSG %S_MSG on '%.*ls' as the target is not in the current database.
2110	15	No	Cannot alter trigger '%.*ls' on '%.*ls' because this trigger does not belong to this object. Specify the correct trigger name or the correct target object name.
2111	16	No	Cannot %S_MSG trigger '%.*ls' on %S_MSG '%.*ls' because an INSTEAD OF %s trigger already exists on this object.
2112	16	No	Cannot create trigger '%.*ls' on view '%.*ls' because the view is defined with CHECK OPTION.
2113	16	No	Cannot %S_MSG INSTEAD OF DELETE or INSTEAD OF UPDATE TRIGGER '%.*ls' on table '%.*ls'. This is because the table has a FOREIGN KEY with cascading DELETE or UPDATE.
2114	16	No	Column '%.*ls' cannot be used in an IF UPDATE clause because it is a computed column.
2115	16	No	Server level event notifications are disabled as the database msdb does not exist.
2116	16	No	Cannot CREATE EVENT NOTIFICATION to database '%.*ls' because it is not a valid broker database.
2117	16	No	Cannot %S_MSG INSTEAD OF trigger '%.*ls' on %S_MSG '%.*ls' because the %S_MSG has a FILESTREAM column.
2201	16	No	%sDerivation from "anySimpleType" by restriction is not permitted, and derivation by restriction from a type derived from "anySimpleType" by extension is allowed only if no constraining facets are specified.
2202	16	No	%sAn error has occurred while compiling the query. To obtain more detailed information about the error, the query must be run by a user with EXECUTE permissions on the xml schema collection used in the query.
2203	16	No	%sOnly 'http://www.w3.org/2001/XMLSchema#decimal?', 'http://www.w3.org/2001/XMLSchema#boolean?' or 'node()*' expressions allowed as predicates, found '%ls'
2204	16	No	%sOnly 'http://www.w3.org/2001/XMLSchema#boolean?' or 'node()*' expressions allowed in conditions and with logical operators, found '%ls'
2205	16	No	%s"%ls" was expected.
2206	16	No	%sNamespace prefix 'xml' can only be associated with the URI 'http://www.w3.org/XML/1998/namespace' and this URI cannot be used with other prefixes.
2207	16	No	%sOnly non-document nodes can be inserted. Found "%ls".
2208	16	No	%sThe URI that starts with '%ls' is too long. Maximum allowed length is %d characters.
2209	16	No	%sSyntax error near '%ls'
2210	16	No	%sHeterogeneous sequences are not allowed: found '%ls' and '%ls'
2211	16	No	%sSingleton (or empty sequence) required, found operand of type '%ls'
2212	16	No	%sInvalid source character '%c' (0x%02x) found in an identifier near '%ls'.
2213	16	No	%sCannot atomize/apply data() on expression that contains type '%ls' within inferred type '%ls'
2214	16	No	%sThe type '%ls' is not an atomic type
2215	16	No	%sThe value of attribute '%ls' exceeds 4000 characters, the maximum permitted in XML schema documents
2216	16	No	%sInvalid XPath value in "%ls".
2217	16	No	%s'%ls' or '%ls' expected
2218	16	No	%sThere is no attribute named '@%ls'
2219	16	No	%sThere is no attribute named '@%ls' in the type '%ls'.
2220	16	No	%sThere is no attribute named '@%ls:%ls'
2221	16	No	%sThere is no attribute named '@%ls:%ls' in the type '%ls'.
2222	16	No	%sInvalid source character 0x%02x found in an identifier near '%ls'.
2223	16	No	%sSyntax error near '%ls', expected an identifier.
2225	16	No	%sA string literal was expected
2226	16	No	%sThe target of 'insert' must be a single node, found '%ls'
2227	16	No	%sThe variable '%ls' was not found in the scope in which it was referenced.
2228	16	No	%sThe variable '%ls:%ls' was not found in the scope in which it was referenced.
2229	16	No	%sThe name "%ls" does not denote a namespace.
2230	16	No	%sThe name "%ls" has already been defined.
2231	16	No	%sThe name "%ls" does not denote a defined type.
2232	16	No	%sThe name "%ls:%ls" does not denote a defined type.
2233	16	No	%sThe operand of "%ls" has an invalid type.
2234	16	No	%sThe operator "%ls" cannot be applied to "%ls" and "%ls" operands.
2235	16	No	%sAn argument list was applied to a non-function term.
2236	16	No	%sThere are not enough actual arguments in the call to function "%ls".
2237	16	No	%sDerivation from anyType by extension is not supported in this release.
2238	16	No	%sToo many arguments in call to function '%ls'
2240	16	No	%sThe target of 'insert into' must be an element/document node, found '%ls'
2241	16	No	%sVariable expected: '$name'
2242	16	No	%sType specification expected.
2243	16	No	%sRelative path expression used without any context
2247	16	No	%sThe value is of type "%ls", which is not a subtype of the expected type "%ls".
2248	16	No	%sSyntax error near '%ls', expected 'as', 'into', 'before' or 'after'.
2249	16	No	%sThe target of 'insert before/after' must be an element/PI/comment/text node, found '%ls'
2256	16	No	%sSyntax error near '%ls', expected a "node test".
2258	16	No	%sThe position may not be specified when inserting an attribute node, found '%ls'
2260	16	No	%sThere is no element named '%ls'
2261	16	No	%sThere is no element named '%ls' in the type '%ls'.
2262	16	No	%sThere is no element named '%ls:%ls'
2263	16	No	%sThere is no element named "%ls:%ls" in the type "%ls".
2264	16	No	%sOnly non-document nodes may be deleted, found '%ls'
2266	16	No	%sExpected end tag '%ls:%ls'
2267	16	No	%sExpected end tag '%ls'
2268	16	No	%sEnd tag '/%ls:%ls' has no matching begin tag
2269	16	No	%sEnd tag '/%ls' has no matching begin tag
2270	16	No	%sDuplicate attribute '%ls:%ls'
2271	16	No	%sDuplicate attribute '%ls'
2272	16	No	%s'?>' expected
2273	16	No	%sUnterminated CDATA section
2274	16	No	%sUnterminated string constant (started on line %u)
2275	16	No	%sUnterminated XML declaration
2276	16	No	%sDerivation from 'QName' by restriction is not supported in this release
2277	16	No	%sA tag name may not contain the character '%c'
2278	16	No	%sA tag name may not start with the character '%c'
2279	16	No	%sA name/token may not start with the character '%c'
2280	16	No	%s<! was not followed by a valid construct
2281	16	No	%sCannot construct DTDs in XQuery
2282	16	No	%sInvalid entity reference
2283	16	No	%sThe character '%c' may not be part of an entity reference
2284	16	No	%sThe namespace prefix '%ls' has not been defined
2285	16	No	%sInvalid numeric entity reference
2291	16	No	%sNo root element was found.
2292	16	No	%sWhen a type with simple content restricts a type with mixed content, it must have an embedded simple type definition. Location: '%ls'.
2293	16	No	%sChoice cannot be empty unless minOccurs is 0. Location: '%ls'.
2294	16	No	%s'xml' is not allowed as a processing instruction target.
2297	16	No	%sElement <%ls> is not valid at location '%ls'.
2298	16	No	%sAttribute '%ls' is not valid at location '%ls'.
2299	16	No	%sRequired attribute "%ls" of XSD element "%ls" is missing.
2300	16	No	%sRequired sub-element "%ls" of XSD element "%ls" is missing.
2301	16	No	%sThe element "%ls" has already been defined.
2302	16	No	%sThe name "%ls" has already been defined in this scope.
2305	16	No	%sElement or attribute type specified more than once. Location: '%ls'.
2306	16	No	%sThe qualified name "%ls" was found in a context where only NCName is allowed.
2307	16	No	%sReference to an undefined name '%ls'
2308	16	No	%sReference to an undefined name '%ls' within namespace '%ls'
2309	16	No	%sThe value of "%ls" is not a valid number.
2310	16	No	%sThe attribute "%ls" is declared more than once.
2311	16	No	%sThe attribute "%ls" is declared more than once within "%ls".
2312	16	No	%sThe value of attribute '%ls' does not conform to the type definition 'http://www.w3.org/2001/XMLSchema#%ls': '%ls'.
2313	16	No	%sThe attribute "%ls" cannot have a value of "%ls".
2314	16	No	%sThe attribute "%ls" cannot have a negative value.
2315	16	No	%sThe attribute "%ls" should have a string value.
2316	16	No	%sThe required 'base' attribute is missing. Location: '%ls'.
2317	16	No	%sThe base type "%ls" defined on XSD element "%ls" is not a simple type.
2319	16	No	%sThis type may not have a '%ls' facet. Location: '%ls'.
2320	16	No	%sDuplicate facet '%ls' found at location '%ls'.
2321	16	No	%sFacets cannot follow attribute declarations. Found facet '%ls' at location '%ls'.
2322	16	No	%sThe element type is not a subclass of the substitution group's head
2323	16	No	%sThe end tag '%ls' doesn't match opening tag '%ls' from line %u
2324	16	No	%sThe end tag '%ls:%ls' doesn't match opening tag '%ls' from line %u
2325	16	No	%sThe end tag '%ls' doesn't match opening tag '%ls:%ls' from line %u
2326	16	No	%sThe end tag '%ls:%ls' doesn't match opening tag '%ls:%ls' from line %u
2327	16	No	%sThe content or definition of <%ls> is missing.
2328	16	No	%sSchema namespace '%ls' doesn't match <include> directive's '%ls'
2329	16	No	%sThe string "%ls" is not a valid time duration value.
2331	16	No	%sRedefinition has to have itself as base type. Location: '%ls'.
2332	16	No	%s'%ls' may not be used with an 'empty' operand
2333	16	No	%sInvalid source character 0x%02x
2334	16	No	%sInvalid source character '%c' (0x%02x)
2335	16	No	%sNewline in character/string constant
2336	16	No	%s'%c' is not a valid octal digit (numbers starting with '0' are implicitly octal)
2337	16	No	%sThe target of 'replace' must be at most one node, found '%ls'
2338	16	No	%sThe second 'replace' operand must contain only nodes, found '%ls'
2339	16	No	%sEither a memberType attribute or a simpleType child must be present. Location: '%ls'.
2340	16	No	%sComment started on line %u has no end
2341	16	No	%sExpected hex character code following '\x'
2342	16	No	%sInvalid numeric constant.
2343	16	No	%sUnterminated text section - missing `
2348	16	No	%sA namespace URI should contain at least one non-whitespace character.
2349	16	No	%sAttempt to redefine namespace prefix '%ls'
2350	16	No	%sInvalid XML element content
2351	16	No	%sExpected 'first' or 'last'
2353	16	No	%s'to' or 'insert' or 'delete' expected
2354	16	No	%sInvalid source character encoding
2355	16	No	%s'else' expected
2356	16	No	%sThe target of 'replace value of' must be a non-metadata attribute or an element with simple typed content, found '%ls'
2357	16	No	%sA document node may only be replaced with another document node, found '%ls'
2358	16	No	%sDerivation with both a 'base' attribute and an embedded type definition is not supported in this release. Location: '%ls'.
2359	16	No	%sThe target of '%ls' may not be a constructed node
2360	16	No	%sCannot have both a 'name' and 'ref' attribute. Location: '%ls'.
2361	16	No	%sThe base type of an XSD extension or restriction type must be a simple type.
2362	16	No	%sXSD schema too complex
2363	16	No	%sXQuery too complex
2364	16	No	%sCannot implicitly convert from '%ls' to '%ls'
2365	16	No	%sCannot explicitly convert from '%ls' to '%ls'
2366	16	No	%s"%ls" has a circular definition.
2367	16	No	%sThe item type of an XSD list type must be a simple type. Location: '%ls'.
2368	16	No	%sCannot have element content in a complex type with simple content. Location: '%ls'.
2369	16	No	%sCannot have more than one group/sequence/choice/all within a restriction or extension. Location: '%ls'.
2370	16	No	%sNo more tokens expected at the end of the XQuery expression. Found '%ls'.
2371	16	No	%s'%ls' can only be used within a predicate or XPath selector
2372	16	No	%sMetadata attribute '@%ls:%ls' may not be used with '%ls'
2373	16	No	%s%ls is not supported with constructed XML
2374	16	No	%sA node or set of nodes is required for %ls
2375	16	No	%sAggregate function '%ls' expects a sequence argument
2376	16	No	%sOperand of a single numeric type expected
2377	16	No	%sResult of '%ls' expression is statically 'empty'
2378	16	No	%sExpected XML schema document
2379	16	No	%sThe name specified is not a valid XML name :'%ls'
2380	16	No	%sMixed content is not allowed at location '%ls'.
2382	16	No	%sInvalid combination of minOccurs and maxOccurs values, minOccurs has to be less than or equal to maxOccurs. Location: '%ls'.
2383	16	No	%sInvalid value '%ls' for the %ls attribute. The value has to be between 0 and %ld.
2384	16	No	%sInvalid element occurrence, element '%ls' was found multiple times in the context of element '%ls'
2385	16	No	Invalid target namespace specified
2386	16	No	%sThe value of '%ls' facet is outside of the allowed range
2387	16	No	%sCannot have both 'type' and 'ref' attributes. Location: '%ls'.
2388	16	No	%sInvalid element occurrence, element '%ls' has to appear first in the context of '%ls'
2389	16	No	%s'%ls' requires a singleton (or empty sequence), found operand of type '%ls'
2390	16	No	%sTop-level %s nodes are not supported
2391	16	No	%sRedefining XSD schemas is not supported
2392	16	No	%s'%ls::' is not a valid axis
2393	16	No	%sEither an itemType attribute or a simpleType child must be present. Location: '%ls'.
2394	16	No	%sThere is no function '%ls()'
2395	16	No	%sThere is no function '%ls:%ls()'
2396	16	No	%sAttribute may not appear outside of an element
2397	16	No	%sIdentifiers may not contain more than %u characters
2398	16	No	%sDuplicate id value found: '%ls'
2399	16	No	%sAn attribute cannot have a value of type '%ls', a simple type was expected
2431	10	Yes	Error [%d, %d, %d] occurred while attempting to deallocate workfile extent with extent ID [%d:%d].
2501	16	No	Cannot find a table or object with the name "%.*ls". Check the system catalog.
2502	16	No	Memory object list dump failed due to temporary inconsistency in the memory object structure. Please try again.
2503	10	No	Successfully deleted the physical file '%ls'.
2504	16	No	Could not delete the physical file '%ls'. The DeleteFile system function returned error %ls.
2505	16	No	The device '%.*ls' does not exist. Use sys.backup_devices to show available devices.
2506	16	No	Could not find a table or object name '%.*ls' in database '%.*ls'.
2507	16	No	The CONCAT_NULL_YIELDS_NULL option must be set to ON to run DBCC CHECKCONSTRAINTS.
2508	16	No	The %.*ls count for object "%.*ls", index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls) is incorrect. Run DBCC UPDATEUSAGE.
2509	16	No	DBCC CHECKCONSTRAINTS failed due to an internal query error. Please run DBCC CHECKDATABASE to ensure your data consistency.
2510	16	No	DBCC %ls error: %ls.
2511	16	No	Table error: Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls). Keys out of order on page %S_PGID, slots %d and %d.
2512	16	No	Table error: Object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls). Duplicate keys on page %S_PGID slot %d and page %S_PGID slot %d.
2513	16	No	DBCC DBREINDEX cannot be used on memory optimized tables.
2514	16	No	A DBCC PAGE error has occurred: %ls.
2515	16	No	The page %S_PGID, object ID %d, index ID %d, partition ID %I64d, allocation unit ID %I64d (type %.*ls) has been modified, but is not marked as modified in the differential backup bitmap.
2516	16	Yes	Repair has invalidated the differential bitmap for database %.*ls. The differential backup chain is broken. You must perform a full database backup before you can perform a differential backup.
2517	16	Yes	Bulk-logging has been turned on for database %.*ls. To ensure that all data has been secured, run backup log operations again.
2518	10	No	Object ID %ld (object "%.*ls"): Computed columns and CLR types cannot be checked for this object because the common language runtime (CLR) is disabled.
2519	10	No	Computed columns and CLR types cannot be checked for object ID %ld (object "%.*ls") because the internal expression evaluator could not be initialized.
2520	16	No	Could not find database '%.*ls'. The database either does not exist, or was dropped before a statement tried to use it. Verify if the database exists by querying the sys.databases catalog view.
2521	16	No	Could not find database ID %d. The database ID either does not exist, or the database was dropped before a statement tried to use it. Verify if the database ID exists by querying the sys.databases catalog view.
2522	16	No	Unable to process index %.*ls of table %.*ls because filegroup %.*ls is invalid.
2523	16	No	Filegroup %.*ls is invalid.
2524	16	No	Cannot process object ID %ld (object "%.*ls") because it is a Service Broker queue. Try the operation again with the object ID of the corresponding internal table for the queue, found in sys.internal_tables.
2525	16	No	Database file %.*ls is offline.
2526	16	No	Incorrect DBCC statement. Check the documentation for the correct DBCC syntax and options.
2527	16	No	Unable to process index %.*ls of table %.*ls because filegroup %.*ls is offline.
2528	10	No	DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2529	16	No	Filegroup %.*ls is offline.
2530	16	No	The index "%.*ls" on table "%.*ls" is disabled.
2531	16	No	Table error: object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls) B-tree level mismatch, page %S_PGID. Level %d does not match level %d from the previous %S_PGID.
2532	16	No	One or more WITH options specified are not valid for this command.
2533	16	No	Table error: page %S_PGID allocated to object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls) was not seen. The page may be invalid or may have an incorrect alloc unit ID in its header.
2534	16	No	Table error: page %S_PGID, whose header indicates that it is allocated to object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), is allocated by another object.
2536	10	No	DBCC results for '%.*ls'.
2537	16	No	Table error: object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), page %S_PGID, row %d. The record check (%.*ls) failed. The values are %I64d and %I64d.
2538	10	No	File %d. The number of extents = %I64d, used pages = %I64d, and reserved pages = %I64d.
2539	10	No	The total number of extents = %I64d, used pages = %I64d, and reserved pages = %I64d in this database.
2540	10	No	The system cannot self repair this error.
2541	10	No	DBCC UPDATEUSAGE: Usage counts updated for table '%.*ls' (index '%.*ls', partition %ld):
2542	10	No	DATA pages %.*ls: changed from (%I64d) to (%I64d) pages.
2543	10	No	USED pages %.*ls: changed from (%I64d) to (%I64d) pages.
2544	10	No	RSVD pages %.*ls: changed from (%I64d) to (%I64d) pages.
2545	10	No	ROWS count: changed from (%I64d) to (%I64d) rows.
2546	10	No	Index '%.*ls' on table '%.*ls' is marked as disabled. Rebuild the index to bring it online.
2547	16	No	Unable to process object ID %ld (object "%.*ls") because it is a synonym. If the object referenced by the synonym is a table or view, retry the operation using the base object that the synonym references.
2548	10	No	DBCC: Compaction phase of index '%.*ls' is %d%% complete.
2549	10	No	DBCC: Defrag phase of index '%.*ls' is %d%% complete.
2550	16	No	The index "%.*ls" (partition %ld) on table "%.*ls" cannot be reorganized because it is being reorganized by another process.
2551	16	No	The indexes on table "%.*ls" cannot be reorganized because there is already an online index build or rebuild in progress on the table.
2552	16	No	The index "%.*ls" (partition %ld) on table "%.*ls" cannot be reorganized because page level locking is disabled.
2553	10	Yes	Table '%.*ls' will not be available during reorganizing index '%.*ls'. This is because the index reorganization operation performs inside a user transaction and the entire table is exclusively locked.
2554	16	No	The index "%.*ls" (partition %ld) on table "%.*ls" cannot be reorganized because the filegroup is read-only.
2555	16	No	Cannot move all contents of file "%.*ls" to other places to complete the emptyfile operation.
2556	16	No	There is insufficient space in the filegroup to complete the emptyfile operation.
2557	14	No	User '%.*ls' does not have permission to run DBCC %ls for object '%.*ls'.
2558	16	No	%I64d incorrect counts were detected in database '%.*ls'.
2559	16	No	The '%ls' and '%ls' options are not allowed on the same statement.
2560	16	No	Parameter %d is incorrect for this DBCC statement.
2561	16	No	Parameter %d is incorrect for this statement.
2562	16	No	Checking FILESTREAM filegroup "%.*ls" (ID %d) is not supported in DBCC CHECKFILEGROUP. Specify a filegroup containing user objects with FILESTREAM data instead.
2563	16	No	DBCC SHRINKFILE for FILESTREAM containers requires EMPTYFILE option and does not allow any other options.
2564	16	No	DBCC SHRINKFILE for %.*ls is aborted. MEMORY_OPTIMIZED_DATA containers are not supported.
2565	16	No	DBCC DBREINDEX cannot be used on memory optimized tables.
2566	14	No	DBCC DBREINDEX cannot be used on system tables.
2567	14	No	DBCC INDEXDEFRAG cannot be used on system table indexes
2568	16	No	Page %S_PGID is out of range for this database or is in a log file.
2569	16	No	Parameter %d is incorrect for this DBCC statement: %ls.
2570	16	No	Page %S_PGID, slot %d in object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type "%.*ls"). Column "%.*ls" value is out of range for data type "%.*ls". Update column to a legal value.
2571	14	No	User '%.*ls' does not have permission to run DBCC %.*ls.
2572	16	No	DBCC cannot free DLL '%.*ls'. The DLL is in use.
2573	16	No	Could not find table or object ID %.*ls. Check system catalog.
2574	16	No	Table error: Page %S_PGID is empty in object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls). This is not permitted at level %d of the B-tree.
2575	16	No	The Index Allocation Map (IAM) page %S_PGID is pointed to by the next pointer of IAM page %S_PGID in object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), but it was not detected in the scan.
2576	16	No	The Index Allocation Map (IAM) page %S_PGID is pointed to by the previous pointer of IAM page %S_PGID in object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls), but it was not detected in the scan.
2577	16	No	Chain sequence numbers are out of order in the Index Allocation Map (IAM) chain for object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls). Page %S_PGID with sequence number %d points to page %S_PGID with sequence number %d.
2579	16	No	Table error: Extent %S_PGID in object ID %d, index ID %d, partition ID %I64d, alloc unit ID %I64d (type %.*ls) is beyond the range of this database.
2580	16	No	Table '%.*ls' is either a system or temporary table. DBCC CLEANTABLE cannot be applied to a system or temporary table.
2581	10	No	DBCC cannot free the DLL "%.*ls". The DLL is not loaded.
2583	16	No	An incorrect number of parameters was given to the DBCC statement.
2585	16	No	Cannot find partition number %ld for table "%.*ls".
2586	16	No	Cannot find partition number %ld for index "%.*ls", table "%.*ls".
2587	16	No	The invalid partition number %ld was specified.
2588	16	No	Cannot find partition number %ld for index ID %d, object ID %d.
2589	16	No	Repair could not fix all errors on the first attempt.
2590	10	Yes	User "%.*ls" is modifying bytes %d to %d of page %S_PGID in database "%.*ls".
2591	16	No	Cannot find a row in the system catalog with the index ID %d for table "%.*ls".
2592	10	No	Repair: The %ls index successfully rebuilt for the object "%.*ls" in database "%.*ls".
2593	10	No	There are %I64d rows in %I64d pages for object "%.*ls".
2594	10	No	Cannot process rowset ID %I64d of object "%.*ls" (ID %d), index "%.*ls" (ID %d), because it resides on filegroup "%.*ls" (ID %d), which was not checked.
2595	10	No	Cannot process table "%.*ls" because one of the partitions for its base index exists on the filegroup "%.*ls", which was not checked.
2596	16	No	The repair statement was not processed. The database cannot be in read-only mode.
2597	10	No	Ignoring trace flag %d. It is either an invalid trace flag or a trace flag that can only be specified during server startup.
2598	16	No	Check cannot proceed on any objects belonging to database "%.*ls" because it is currently in recovery.
2599	16	No	Cannot switch to in row text in table "%.*ls".
2601	14	No	Cannot insert duplicate key row in object '%.*ls' with unique index '%.*ls'. The duplicate key value is %ls.
2627	14	No	Violation of %ls constraint '%.*ls'. Cannot insert duplicate key in object '%.*ls'. The duplicate key value is %ls.
2628	16	No	String or binary data would be truncated in table '%.*ls', column '%.*ls'. Truncated value: '%.*ls'.
2700	16	No	There are too many statements in the batch; the maximum number is %d
2701	10	No	Database name '%.*ls' ignored, referencing object in tempdb.
2702	16	No	Database '%.*ls' does not exist.
2703	16	No	Cannot use duplicate column names in the partition columns list. Column name '%.*ls' appears more than once.
2704	16	No	Invalid partition scheme '%.*ls' specified.
2705	16	No	Column names in each table must be unique. Column name '%.*ls' in table '%.*ls' is specified more than once.
2706	11	No	Table '%.*ls' does not exist.
2707	16	No	Column '%.*ls' in %S_MSG '%.*ls' cannot be used in an index or statistics or as a partition key because it depends on a non-schemabound object.
2709	16	No	Column '%.*ls' in %S_MSG '%.*ls' cannot be used in an index or statistics or as a partition key because it does user or system data access.
2710	16	No	You are not the owner specified for the object '%.*ls' in this statement (CREATE, ALTER, TRUNCATE, UPDATE STATISTICS or BULK INSERT).
2711	16	No	The definition of object "%.*ls" in the resource database contains the non-ASCII character "%.*ls".
2712	16	No	Database '%.*ls' can not be configured as a distribution database because it has change tracking enabled.
2714	16	No	There is already an object named '%.*ls' in the database.
2715	16	No	Column, parameter, or variable #%d: Cannot find data type %.*ls.
2716	16	No	Column, parameter, or variable #%d: Cannot specify a column width on data type %.*ls.
2717	15	No	The size (%d) given to the %S_MSG '%.*ls' exceeds the maximum allowed (%d).
2719	16	No	Upgrade of database "%.*ls" failed because it contains a user named "sys" which is a reserved user or schema name in this version of SQL Server.
2720	16	No	Cannot schema bind %S_MSG '%.*ls' because it references system object '%.*ls'.
2722	16	No	Xml data type methods are not allowed in expressions in this context.
2724	10	No	Parameter or variable '%.*ls' has an invalid data type.
2725	16	No	An online operation cannot be performed for %S_MSG '%.*ls' because the index contains column '%.*ls' of data type text, ntext, image or FILESTREAM. For a non-clustered index, the column could be an include column of the index. For a clustered index, the column could be any column of the table. If DROP_EXISTING is used, the column could be part of a new or old index. The operation must be performed offline.
2726	16	No	Partition function '%.*ls' uses %d columns which does not match with the number of partition columns used to partition the table or index.
2727	11	No	Cannot find index '%.*ls'.
2728	16	No	Cannot partition on more than %d columns.
2729	16	No	Column '%.*ls' in %S_MSG '%.*ls' cannot be used in an index or statistics or as a partition key because it is non-deterministic.
2730	11	No	Cannot create procedure '%.*ls' with a group number of %d because a procedure with the same name and a group number of 1 does not currently exist in the database. Must execute CREATE PROCEDURE '%.*ls';1 first.
2731	16	No	Column '%.*ls' has invalid width: %d.
2732	16	No	Error number %ld is invalid. The number must be from %ld through %ld and it cannot be 50000.
2733	16	No	The %ls data type is invalid for return values.
2735	16	No	Cannot create primary xml, selective xml or spatial index '%.*ls' on '%.*ls' because PRIMARY KEY constraint contains column(s) of type timestamp.
2738	16	No	A table can only have one timestamp column. Because table '%.*ls' already has one, the column '%.*ls' cannot be added.
2739	16	No	The text, ntext, and image data types are invalid for local variables.
2740	16	No	SET LANGUAGE failed because '%.*ls' is not an official language name or a language alias on this SQL Server.
2741	16	No	SET DATEFORMAT date order '%.*ls' is invalid.
2742	16	No	SET DATEFIRST %d is out of range.
2743	16	No	%ls option requires %S_MSG parameter.
2744	16	No	Multiple identity columns specified for table '%.*ls'. Only one identity column per table is allowed.
2745	10	No	Process ID %d has raised user error %d, severity %d. SQL Server is terminating this process.
2747	16	No	Too many substitution parameters for RAISERROR. Cannot exceed %d substitution parameters.
2748	16	No	Cannot specify %ls data type (parameter %d) as a substitution parameter.
2749	16	No	Identity column '%.*ls' must be of data type int, bigint, smallint, tinyint, or decimal or numeric with a scale of 0, unencrypted, and constrained to be nonnullable.
2750	16	No	Column or parameter #%d: Specified column precision %d is greater than the maximum precision of %d.
2751	16	No	Column or parameter #%d: Specified column scale %d is greater than the specified precision of %d.
2752	16	No	Identity column '%.*ls' contains invalid SEED.
2753	16	No	Identity column '%.*ls' contains invalid INCREMENT.
2754	16	No	Error severity levels greater than %d can only be specified by members of the sysadmin role, using the WITH LOG option.
2755	16	No	SET DEADLOCK_PRIORITY option is invalid. Valid options are {HIGH | NORMAL | LOW | [%d ... %d] of type integer}.
2756	16	No	Invalid value %d for state. State value must not be less than %d.
2759	16	No	CREATE SCHEMA failed due to previous errors.
2760	16	No	The specified schema name "%.*ls" either does not exist or you do not have permission to use it.
2761	16	No	The ROWGUIDCOL property can only be specified on the uniqueidentifier data type.
2762	16	No	sp_setapprole was not invoked correctly. Refer to the documentation for more information.
2763	16	No	Could not find application role '%.*ls'.
2764	16	No	Incorrect password supplied for application role '%.*ls'.
2766	16	No	The definition for user-defined data type '%.*ls' has changed.
2767	15	No	Could not locate statistics '%.*ls' in the system catalogs.
2770	16	No	The SELECT INTO statement cannot have same source and destination tables.
2772	16	No	Cannot access temporary tables from within a function.
2773	16	No	The collation ID is corrupted because the sort order ID %d is not valid.
2774	16	No	Collation ID %d is invalid.
2775	16	No	The code page %d is not supported by the server.
2778	16	No	Only System Administrator can specify %s option for %s command.
2779	16	No	The %S_MSG '%.*ls' is an auto-drop system object. It cannot be used in queries or DDL.
2780	16	No	View '%.*ls' is not schemabound.
2782	16	No	Cannot create table "%.*ls": A table must have a clustered primary key in order to have XML data type columns.
2785	16	No	User-defined functions, user-defined aggregates, CLR types, and methods on CLR types are not allowed in expressions in this context.
2786	16	No	The data type of substitution parameter %d does not match the expected type of the format specification.
2787	16	No	Invalid format specification: '%.*ls'.
2788	16	No	Synonyms are invalid in a schemabound object or a constraint expression.
2789	16	No	Must specify a two-part name for %S_MSG '%.*ls' in a schemabound object or a constraint expression.
2790	16	No	Cannot use a column of type TEXT, NTEXT, or IMAGE in a constraint expression.
2791	16	No	Could not resolve expression for Schema-bound object or constraint.
2792	16	No	Cannot specify a sql CLR type in a Schema-bound object or a constraint expression.
2793	16	No	Specified owner name '%.*ls' either does not exist or you do not have permission to act on its behalf.
2794	16	No	Message text expects more than the maximum number of arguments (%d).
2795	16	No	Could not %S_MSG %S_MSG because the new %S_MSG '%.*ls' does not match the FILESTREAM %S_MSG '%.*ls' of the table.
2796	16	No	Cannot specify database name with $partition in a Schema-bound object, computed column or constraint expression.
2797	16	No	The default schema does not exist.
2798	16	No	Cannot create index or statistics '%.*ls' on table '%.*ls' because SQL Server cannot verify that key column '%.*ls' is precise and deterministic. Consider removing column from index or statistics key, marking computed column persisted, or using non-CLR-derived column in key.
2799	16	No	Cannot create index or statistics '%.*ls' on table '%.*ls' because the computed column '%.*ls' is imprecise and not persisted. Consider removing column from index or statistics key or marking computed column persisted.
2801	16	No	The definition of object '%.*ls' has changed since it was compiled.
2802	10	No	SQL Server has encountered %d occurrence(s) of cachestore flush for the '%s' cachestore (part of plan cache) due to 'DBCC FREEPROCCACHE' or 'DBCC FREESYSTEMCACHE' operations.
2803	10	No	SQL Server has encountered %d occurrence(s) of cachestore flush for the '%s' cachestore (part of plan cache) due to some database maintenance or reconfigure operations.
2809	16	No	The request for %S_MSG '%.*ls' failed because '%.*ls' is a %S_MSG object.
2812	16	No	Could not find stored procedure '%.*ls'.
2813	16	No	"%.*ls" is not supported on this edition of SQL Server.
2814	10	No	A possible infinite recompile was detected for SQLHANDLE %hs, PlanHandle %hs, starting offset %d, ending offset %d. The last recompile reason was %d.
2815	10	No	A possible infinite recompile was detected for the natively compiled module with ID '%d' in database with ID '%d'.
2816	16	No	The metadata for object with id %d has changed. Retry the statement.
2817	16	No	'%.*ls' is not supported on the '%.*ls' platform.
2818	16	No	The stored procedure '%.*ls' cannot be run since this server has not been enabled for external governance.

Related content

• Database Engine events and errors
• Understanding Database Engine errors
• Cause and resolution of Database Engine errors