Επεξεργασία

Κοινή χρήση μέσω


Set-MobileDeviceMailboxPolicy

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-MobileDeviceMailboxPolicy cmdlet to modify mobile device mailbox policies.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-MobileDeviceMailboxPolicy
   [-Identity] <MailboxPolicyIdParameter>
   [-AllowApplePushNotifications <Boolean>]
   [-AllowBluetooth <BluetoothType>]
   [-AllowBrowser <Boolean>]
   [-AllowCamera <Boolean>]
   [-AllowConsumerEmail <Boolean>]
   [-AllowDesktopSync <Boolean>]
   [-AllowExternalDeviceManagement <Boolean>]
   [-AllowGooglePushNotifications <Boolean>]
   [-AllowHTMLEmail <Boolean>]
   [-AllowInternetSharing <Boolean>]
   [-AllowIrDA <Boolean>]
   [-AllowMicrosoftPushNotifications <Boolean>]
   [-AllowMobileOTAUpdate <Boolean>]
   [-AllowNonProvisionableDevices <Boolean>]
   [-AllowPOPIMAPEmail <Boolean>]
   [-AllowRemoteDesktop <Boolean>]
   [-AllowSimplePassword <Boolean>]
   [-AllowSMIMEEncryptionAlgorithmNegotiation <SMIMEEncryptionAlgorithmNegotiationType>]
   [-AllowSMIMESoftCerts <Boolean>]
   [-AllowStorageCard <Boolean>]
   [-AllowTextMessaging <Boolean>]
   [-AllowUnsignedApplications <Boolean>]
   [-AllowUnsignedInstallationPackages <Boolean>]
   [-AllowWiFi <Boolean>]
   [-AlphanumericPasswordRequired <Boolean>]
   [-ApprovedApplicationList <ApprovedApplicationCollection>]
   [-AttachmentsEnabled <Boolean>]
   [-Confirm]
   [-DeviceEncryptionEnabled <Boolean>]
   [-DevicePolicyRefreshInterval <Unlimited>]
   [-DomainController <Fqdn>]
   [-IrmEnabled <Boolean>]
   [-IsDefault <Boolean>]
   [-MaxAttachmentSize <Unlimited>]
   [-MaxCalendarAgeFilter <CalendarAgeFilterType>]
   [-MaxEmailAgeFilter <EmailAgeFilterType>]
   [-MaxEmailBodyTruncationSize <Unlimited>]
   [-MaxEmailHTMLBodyTruncationSize <Unlimited>]
   [-MaxInactivityTimeLock <Unlimited>]
   [-MaxPasswordFailedAttempts <Unlimited>]
   [-MinPasswordComplexCharacters <Int32>]
   [-MinPasswordLength <Int32>]
   [-Name <String>]
   [-PasswordEnabled <Boolean>]
   [-PasswordExpiration <Unlimited>]
   [-PasswordHistory <Int32>]
   [-PasswordRecoveryEnabled <Boolean>]
   [-RequireDeviceEncryption <Boolean>]
   [-RequireEncryptedSMIMEMessages <Boolean>]
   [-RequireEncryptionSMIMEAlgorithm <EncryptionSMIMEAlgorithmType>]
   [-RequireManualSyncWhenRoaming <Boolean>]
   [-RequireSignedSMIMEAlgorithm <SignedSMIMEAlgorithmType>]
   [-RequireSignedSMIMEMessages <Boolean>]
   [-RequireStorageCardEncryption <Boolean>]
   [-UnapprovedInROMApplicationList <MultiValuedProperty>]
   [-UNCAccessEnabled <Boolean>]
   [-WhatIf]
   [-WSSAccessEnabled <Boolean>]
   [<CommonParameters>]

Description

Mobile device mailbox policies define settings for mobile devices that are used to access mailboxes in your organization. The default mobile device mailbox policy is applied to all new mailboxes that you create. You can assign a mobile device mailbox policy to existing mailboxes by using the Set-CASMailbox cmdlet, or by editing the mailbox properties in the Exchange admin center (EAC).

Some mobile device mailbox policy settings require the mobile device to have specific built-in features that enforce these security and device management settings. If your organization allows all devices, you must set the AllowNonProvisionableDevices parameter to $true. This applies to devices that can't enforce all policy settings.

Some settings in this cmdlet are supported by Outlook for iOS and Android. For more information, see Leveraging Exchange Online mobile device policies.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-MobileDeviceMailboxPolicy -Identity "Sales Policy" -PasswordEnabled $true -AlphanumericPasswordRequired $true -PasswordRecoveryEnabled $true -AttachmentsEnabled $true -MaxInactivityTimeLock 15:00 -IsDefault $false

This example sets several policy settings for the mobile device mailbox policy Sales Policy.

Example 2

Set-MobileDeviceMailboxPolicy -Identity Management -PasswordEnabled $true -AlphanumericPasswordRequired $true -PasswordRecoveryEnabled $true -AllowCamera $true -AllowWiFi $false -AllowStorageCard $true -AllowPOPIMAPEmail $false

This example sets several policy settings for the mobile device mailbox policy Management.

Example 3

Set-MobileDeviceMailboxPolicy -Identity Default -PasswordEnabled $true -AlphanumericPasswordRequired $true -PasswordRecoveryEnabled $true -AllowWiFi $false -AllowStorageCard $true -AllowPOPIMAPEmail $false -IsDefault $true -AllowTextMessaging $true -Confirm $true

This example sets several policy settings for the mobile device mailbox policy Default and requires confirmation before applying the settings.

Parameters

-AllowApplePushNotifications

This parameter is available only in the cloud-based service.

The AllowApplePushNotifications parameter specifies whether push notifications are allowed for Apple mobile devices. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online

-AllowBluetooth

The AllowBluetooth parameter specifies whether the Bluetooth capabilities are allowed on the mobile device. Valid values are:

  • Allow (this is the default value).
  • Disable
  • HandsfreeOnly

The values Allow or HandsfreeOnly allow synchronization between Outlook for Android and the Outlook for Android wearable app for the associated Microsoft account.

The value Disable disables synchronization between Outlook for Android and the Outlook for Android wearable app for the associated Microsoft account. Any previously synchronized data is deleted. This value does not disable Bluetooth on the Android device or the wearable device, nor does it affect other Android wearable apps.

Type:BluetoothType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowBrowser

The AllowBrowser parameter specifies whether Microsoft Pocket Internet Explorer is allowed on the mobile device. Valid input for this parameter is $true or $false. The default value is $true. This parameter doesn't affect third-party browsers.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowCamera

The AllowCamera parameter specifies whether the mobile device's camera is allowed. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowConsumerEmail

The AllowConsumerEmail parameter specifies whether the user can configure a personal email account on the mobile device. Valid input for this parameter is $true or $false. The default value is $true. This parameter doesn't control access to email accounts using third-party mobile device email programs.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowDesktopSync

The AllowDesktopSync parameter specifies whether the mobile device can synchronize with a desktop computer through a cable. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowExternalDeviceManagement

The AllowExternalDeviceManagement parameter specifies whether an external device management program is allowed to manage the mobile device. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowGooglePushNotifications

This parameter is available only in the cloud-based service.

The AllowGooglePushNotifications parameter controls whether the user can receive push notifications from Google for Outlook on the web for devices. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-AllowHTMLEmail

The AllowHTMLEmail parameter specifies whether HTML-formatted email is enabled on the mobile device. Valid input for this parameter is $true or $false. The default value is $true. If set to $false, all email is converted to plain text before synchronization occurs.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowInternetSharing

The AllowInternetSharing parameter specifies whether the mobile device can be used as a modem to connect a computer to the Internet. This process is also known as tethering. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowIrDA

The AllowIrDA parameter specifies whether infrared connections are allowed to the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowMicrosoftPushNotifications

This parameter is available only in the cloud-based service.

The AllowMicrosoftPushNotifications parameter specifies whether push notifications are enabled on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-AllowMobileOTAUpdate

The AllowMobileOTAUpdate parameter specifies whether the policy can be sent to the mobile device over a cellular data connection. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowNonProvisionableDevices

The AllowNonProvisionableDevices parameter specifies whether all mobile devices can synchronize with Exchange. Valid input for this parameter is $true or $false. The default value is $true.

When set to $true, this parameter enables all mobile devices to synchronize with Exchange, regardless of whether the device can enforce all settings that are defined by the policy. This also includes mobile devices managed by a separate device management system. When set to $false, this parameter blocks mobile devices that aren't provisioned from synchronizing with Exchange.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowPOPIMAPEmail

The AllowPOPIMAPEmail parameter specifies whether the user can configure a POP3 or IMAP4 email account on the mobile device. Valid input for this parameter is $true or $false. The default value is $true. This parameter doesn't control access by third-party email programs.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowRemoteDesktop

The AllowRemoteDesktop parameter specifies whether the mobile device can initiate a remote desktop connection. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowSimplePassword

The AllowSimplePassword parameter specifies whether a simple password is allowed on the mobile device. A simple password is a password that has a specific pattern, such as 1111 or 1234. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowSMIMEEncryptionAlgorithmNegotiation

The AllowSMIMEEncryptionAlgorithmNegotiation parameter specifies whether the messaging application on the mobile device can negotiate the encryption algorithm if a recipient's certificate doesn't support the specified encryption algorithm. Valid values for this parameter are:

  • AllowAnyAlgorithmNegotiation
  • BlockNegotiation
  • OnlyStrongAlgorithmNegotiation

The default value is AllowAnyAlgorithmNegotiation.

Type:SMIMEEncryptionAlgorithmNegotiationType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowSMIMESoftCerts

The AllowSMIMESoftCerts parameter specifies whether S/MIME software certificates are allowed on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowStorageCard

The AllowStorageCard parameter specifies whether the mobile device can access information stored on a storage card. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowTextMessaging

The AllowTextMessaging parameter specifies whether text messaging is allowed from the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowUnsignedApplications

The AllowUnsignedApplications parameter specifies whether unsigned applications can be installed on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowUnsignedInstallationPackages

The AllowUnsignedInstallationPackages parameter specifies whether unsigned installation packages can be executed on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AllowWiFi

The AllowWiFi parameter specifies whether wireless Internet access is allowed on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AlphanumericPasswordRequired

The AlphanumericPasswordRequired parameter specifies whether the password for the mobile device must be alphanumeric. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-ApprovedApplicationList

The ApprovedApplicationList parameter specifies a configured list of approved applications for the device.

Type:ApprovedApplicationCollection
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-AttachmentsEnabled

The AttachmentsEnabled parameter specifies whether attachments can be downloaded on the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

When set to $false, this parameter blocks the user from downloading attachments on the mobile device.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DeviceEncryptionEnabled

Note: This setting is supported by Outlook for iOS and Android.

The DeviceEncryptionEnabled parameter specifies whether encryption is enabled on the mobile device. Valid input for this parameter is $true or $false. The default value is $false.

When this parameter is set to $true, device encryption is enabled on the mobile device.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DevicePolicyRefreshInterval

The DevicePolicyRefreshInterval parameter specifies how often the policy is sent to the mobile device.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

The default value is Unlimited.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the mobile device mailbox policy. You can use any value that uniquely identifies the policy. For example:

  • Name
  • Distinguished name (DN)
  • GUID

The name of the built-in mobile device mailbox policy is Default.

Type:MailboxPolicyIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IrmEnabled

The IrmEnabled parameter specifies whether Information Rights Management (IRM) is enabled for the mobile device. Valid input for this parameter is $true or $false. The default value is $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-IsDefault

The IsDefault parameter specifies whether this policy is the default mobile device mailbox policy. Valid input for this parameter is $true or $false. The default value for the built-in mobile device mailbox policy named Default is $true. The default value for new mobile device mailbox policies that you create is $false.

There can be only one default policy. If another policy is currently set as the default, and you set this parameter to $true, this policy becomes the default policy. The value of this parameter on the other policy is automatically changed to $false, and that policy is no longer the default policy.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxAttachmentSize

The MaxAttachmentSize parameter specifies the maximum size of attachments that can be downloaded to the mobile device. Valid input for this parameter is a size value between 0 and 2147482624 bytes (approximately 2 GB), or the value Unlimited. The default value is Unlimited.

Unqualified values are treated as bytes. You can qualify the value with KB (kilobytes), MB (megabytes) or GB (gigabytes). For example, to set the limit to 4 kilobytes, enter the value 4096 or 4KB.

The maximum value is 1024 bytes (one kilobyte) less than two gigabytes (2*1024^3), so these are the maximum qualified values you can use with this parameter.

  • 2097151KB
  • 2047.999024MB
  • 1.999999047GB
Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxCalendarAgeFilter

The MaxCalendarAgeFilter parameter specifies the maximum range of calendar days that can be synchronized to the mobile device. Valid values for this parameter are:

  • All
  • TwoWeeks
  • OneMonth
  • ThreeMonths
  • SixMonths

The default value is All.

Type:CalendarAgeFilterType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxEmailAgeFilter

The MaxEmailAgeFilter parameter specifies the maximum number of days of email items to synchronize to the mobile device. Valid values for this parameter are:

  • All
  • OneDay
  • ThreeDays
  • OneWeek
  • TwoWeeks
  • OneMonth

The default value is All.

Type:EmailAgeFilterType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxEmailBodyTruncationSize

The MaxEmailBodyTruncationSize parameter specifies the maximum size at which email messages are truncated when synchronized to the mobile device. Valid input for this parameter is an integer between 0 and 2147483647 (Int32) or the value Unlimited. The default value is Unlimited.

Unqualified values are treated as bytes. You can qualify the value with KB (kilobytes), MB (megabytes) or GB (gigabytes). For example, to set the limit to 4 kilobytes, enter the value 4KB or 4096.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxEmailHTMLBodyTruncationSize

The MaxEmailHTMLBodyTruncationSize parameter specifies the maximum size at which HTML-formatted email messages are truncated when synchronized to the mobile device. Valid input for this parameter is an integer between 0 and 2147483647 (Int32) or the value Unlimited. The default value is Unlimited.

Unqualified values are treated as bytes. You can qualify the value with KB (kilobytes), MB (megabytes) or GB (gigabytes). For example, to set the limit to 4 kilobytes, enter the value 4KB or 4096.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxInactivityTimeLock

The MaxInactivityTimeLock parameter specifies the length of time that the mobile device can be inactive before the password is required to reactivate it. Valid values are:

  • A timespan: hh:mm:ss, where hh = hours, mm = minutes and ss= seconds. The valid input range is 00:01:00 to 01:00:00 (one minute to one hour).
  • The value Unlimited. This is the default value.
Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MaxPasswordFailedAttempts

The MaxPasswordFailedAttempts parameter specifies the number of attempts a user can make to enter the correct password for the mobile device.

You can enter any number from 4 through 16 or the value Unlimited. The default value is Unlimited.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MinPasswordComplexCharacters

The MinPasswordComplexCharacters parameter specifies the character sets that are required in the password of the mobile device. The character sets are:

  • Lower case letters.
  • Upper case letters.
  • Digits 0 through 9.
  • Special characters (for example, exclamation marks).

A valid value for this parameter is an integer from 1 through 4. The default value is 1.

For Windows Phone 8 devices, the value specifies the number of character sets that are required in the password. For example, the value 3 requires at least one character from any three of the character sets.

For Windows Phone 10 devices, the value specifies the following password complexity requirements:

  • Digits only.
  • Digits and lower case letters.
  • Digits, lower case letters, and upper case letters.
  • Digits, lower case letters, upper case letters and special characters.
Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-MinPasswordLength

Note: This setting is supported by Outlook for Android.

The MinPasswordLength parameter specifies the minimum number of characters in the mobile device password.

You can enter any number from 1 through 16 or the value $null. The default value is blank. The maximum password length is 16 characters.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Name

The Name parameter specifies the friendly name of the mobile device mailbox policy.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PasswordEnabled

The PasswordEnabled parameter specifies whether a password is required on the mobile device. Valid input for this parameter is $true or $false. The default value is $false.

When set to $true, this parameter requires the user to set a password on the mobile device.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PasswordExpiration

The PasswordExpiration parameter specifies how long a password can be used on a mobile device before the user is forced to change the password. Valid values are:

  • A timespan: ddd.hh:mm:ss, where ddd = days, hh = hours, mm = minutes and ss= seconds. The valid input range is 1.00:00:00 to 730.00:00:00 (one day to two years).
  • The value Unlimited. This is the default value
Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PasswordHistory

The PasswordHistory parameter specifies the number of unique new passwords that need to be created on the mobile device before an old password can be reused.

You can enter any number from 0 through 50. The default value is 0.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PasswordRecoveryEnabled

The PasswordRecoveryEnabled parameter specifies whether the recovery password for the mobile device is stored in Exchange. Valid input for this parameter is $true or $false. The default value is $false.

When set to $true, this parameter enables you to store the recovery password for the mobile device in Exchange. The recovery password can be viewed in Outlook on the web or the Exchange admin center.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireDeviceEncryption

The RequireDeviceEncryption parameter specifies whether encryption is required on the mobile device. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireEncryptedSMIMEMessages

The RequireEncryptedSMIMEMessages parameter specifies whether the mobile device must send encrypted S/MIME messages. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireEncryptionSMIMEAlgorithm

The RequireEncryptionSMIMEAlgorithm parameter specifies the algorithm that's required to encrypt S/MIME messages on a mobile device. The valid values for this parameter are:

  • DES
  • TripleDES
  • RC240bit
  • RC264bit
  • RC2128bit

The default value is TripleDES.

Type:EncryptionSMIMEAlgorithmType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireManualSyncWhenRoaming

The RequireManualSyncWhenRoaming parameter specifies whether the mobile device must synchronize manually while roaming. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireSignedSMIMEAlgorithm

The RequireSignedSMIMEAlgorithm parameter specifies the algorithm that's used to sign S/MIME messages on the mobile device.

Valid values for this parameter are SHA1 or MD5. The default value is SHA1.

Type:SignedSMIMEAlgorithmType
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireSignedSMIMEMessages

The RequireSignedSMIMEMessages parameter specifies whether the mobile device must send signed S/MIME messages. Valid input for this parameter is $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-RequireStorageCardEncryption

The RequireStorageCardEncryption parameter specifies whether storage card encryption is required on the mobile device. Valid input for this parameter is $true or $false. The default value is $false.

Setting this parameter to $true also sets the DeviceEncryptionEnabled parameter to $true.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-UnapprovedInROMApplicationList

The UnapprovedInROMApplicationList parameter specifies a list of applications that can't be run in ROM on the mobile device.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-UNCAccessEnabled

The UNCAccessEnabled parameter specifies whether access to Microsoft Windows file shares is enabled from the mobile device. In on-premises Exchange organizations, access to specific shares is configured on the Exchange ActiveSync virtual directory.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WSSAccessEnabled

The WSSAccessEnabled parameter specifies whether access to Microsoft Windows SharePoint Services is enabled from the mobile device. In on-premises Exchange organizations, access to specific shares is configured on the Exchange ActiveSync virtual directory.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.