Set-ManagedContentSettings
This cmdlet is available only in Exchange Server 2010.
Use the Set-ManagedContentSettings cmdlet to modify existing managed content settings for a managed folder.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Set-ManagedContentSettings
[-Identity] <ELCContentSettingsIdParameter>
[-AddressForJournaling <RecipientIdParameter>]
[-AgeLimitForRetention <EnhancedTimeSpan>]
[-Confirm]
[-DomainController <Fqdn>]
[-JournalingEnabled <Boolean>]
[-LabelForJournaling <String>]
[-MessageFormatForJournaling <JournalingFormat>]
[-MoveToDestinationFolder <ELCFolderIdParameter>]
[-Name <String>]
[-RetentionAction <RetentionAction>]
[-RetentionEnabled <Boolean>]
[-TriggerForRetention <RetentionDateType>]
[-WhatIf]
[<CommonParameters>] Description
Managed content settings are settings that you apply to managed folders to control the lifespan of items in users' mailboxes. For more information about managed content settings, see Messaging Records Management.
Although the New-ManagedContentSettings cmdlet has the MessageClass parameter, the Set-ManagedContentSettings cmdlet doesn't. If you want to change the message type to which content settings apply, you must delete and then re-create the content settings. For more information about the MessageClass parameter, see New-ManagedContentSettings.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-ManagedContentSettings -Identity MyManagedContentSettings -AddressForJournaling MySmtpAddress@contoso.comThis example specifies the address of the journaling recipient that's the destination of journaling operations.
Parameters
-AddressForJournaling
The AddressForJournaling parameter specifies the journaling recipient where journaled messages are sent. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
| Type: | RecipientIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-AgeLimitForRetention
The AgeLimitForRetention parameter specifies the age at which retention is enforced on an item. The age limit corresponds to the number of days from the date that the item was delivered or the date that an item was created if it wasn't delivered.
If this parameter isn't present and the RetentionEnabled parameter is set to $true, an error is returned.
| Type: | EnhancedTimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-DomainController
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-Identity
The Identity parameter specifies the name, distinguished name (DN), or GUID of the managed content settings.
| Type: | ELCContentSettingsIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-JournalingEnabled
The JournalingEnabled parameter specifies that journaling is enabled when it's set to $true.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-LabelForJournaling
The LabelForJournaling parameter specifies a label that's attached to an item. This label is used by the destination store to determine the content of the item and enforce the appropriate policy.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-MessageFormatForJournaling
The MessageFormatForJournaling parameter specifies the format in which an item should be journaled in. You can use the following values:
- UseMsg Microsoft Outlook .MSG format
- UseTnef Outlook MAPI format
| Type: | JournalingFormat |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-MoveToDestinationFolder
The MoveToDestinationFolder parameter specifies the name of the destination folder for a retention action.
| Type: | ELCFolderIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-Name
The Name parameter specifies a unique name for the managed content settings.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-RetentionAction
The RetentionAction parameter specifies one of the following actions to take when an item reaches its retention age limit, specified by the AgeLimitForRetention parameter. The following retention actions can be used:
- Mark as past retention limit
- Move to a managed custom folder
- Move to the Deleted Items folder
- Delete and allow recovery
- Permanently delete
If this parameter isn't present and the RetentionEnabled parameter is set to $true, an error is returned.
| Type: | RetentionAction |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-RetentionEnabled
The RetentionEnabled parameter specifies that retention is enabled when it's set to $true.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-TriggerForRetention
The TriggerForRetention parameter specifies the date that's considered as the start date of the retention period. An item can reach its retention limit a specific number of days after the item was delivered or after it was moved into a specific folder.
Valid values include:
- WhenDelivered The item expires based on when it was delivered.
- WhenMoved The item expires based on the date it was moved.
If this parameter isn't present and the RetentionEnabled parameter is set to $true, an error is returned.
| Type: | RetentionDateType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-WhatIf
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.