Set-DynamicDistributionGroup

Reference

Module:: ExchangePowerShell

Applies to:: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-DynamicDistributionGroup cmdlet to modify existing dynamic distribution groups.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-DynamicDistributionGroup
   [-Identity] <DynamicGroupIdParameter>
   [-AcceptMessagesOnlyFrom <MultiValuedProperty>]
   [-AcceptMessagesOnlyFromDLMembers <MultiValuedProperty>]
   [-AcceptMessagesOnlyFromSendersOrMembers <MultiValuedProperty>]
   [-Alias <String>]
   [-ArbitrationMailbox <MailboxIdParameter>]
   [-BypassModerationFromSendersOrMembers <MultiValuedProperty>]
   [-ConditionalCompany <MultiValuedProperty>]
   [-ConditionalCustomAttribute1 <MultiValuedProperty>]
   [-ConditionalCustomAttribute10 <MultiValuedProperty>]
   [-ConditionalCustomAttribute11 <MultiValuedProperty>]
   [-ConditionalCustomAttribute12 <MultiValuedProperty>]
   [-ConditionalCustomAttribute13 <MultiValuedProperty>]
   [-ConditionalCustomAttribute14 <MultiValuedProperty>]
   [-ConditionalCustomAttribute15 <MultiValuedProperty>]
   [-ConditionalCustomAttribute2 <MultiValuedProperty>]
   [-ConditionalCustomAttribute3 <MultiValuedProperty>]
   [-ConditionalCustomAttribute4 <MultiValuedProperty>]
   [-ConditionalCustomAttribute5 <MultiValuedProperty>]
   [-ConditionalCustomAttribute6 <MultiValuedProperty>]
   [-ConditionalCustomAttribute7 <MultiValuedProperty>]
   [-ConditionalCustomAttribute8 <MultiValuedProperty>]
   [-ConditionalCustomAttribute9 <MultiValuedProperty>]
   [-ConditionalDepartment <MultiValuedProperty>]
   [-ConditionalStateOrProvince <MultiValuedProperty>]
   [-Confirm]
   [-CreateDTMFMap <Boolean>]
   [-CustomAttribute1 <String>]
   [-CustomAttribute10 <String>]
   [-CustomAttribute11 <String>]
   [-CustomAttribute12 <String>]
   [-CustomAttribute13 <String>]
   [-CustomAttribute14 <String>]
   [-CustomAttribute15 <String>]
   [-CustomAttribute2 <String>]
   [-CustomAttribute3 <String>]
   [-CustomAttribute4 <String>]
   [-CustomAttribute5 <String>]
   [-CustomAttribute6 <String>]
   [-CustomAttribute7 <String>]
   [-CustomAttribute8 <String>]
   [-CustomAttribute9 <String>]
   [-DirectMembershipOnly <Boolean>]
   [-DisplayName <String>]
   [-DomainController <Fqdn>]
   [-EmailAddresses <ProxyAddressCollection>]
   [-EmailAddressPolicyEnabled <Boolean>]
   [-ExpansionServer <String>]
   [-ExtensionCustomAttribute1 <MultiValuedProperty>]
   [-ExtensionCustomAttribute2 <MultiValuedProperty>]
   [-ExtensionCustomAttribute3 <MultiValuedProperty>]
   [-ExtensionCustomAttribute4 <MultiValuedProperty>]
   [-ExtensionCustomAttribute5 <MultiValuedProperty>]
   [-ForceMembershipRefresh]
   [-ForceUpgrade]
   [-GrantSendOnBehalfTo <MultiValuedProperty>]
   [-HiddenFromAddressListsEnabled <Boolean>]
   [-IgnoreDefaultScope]
   [-IncludedRecipients <WellKnownRecipientType>]
   [-MailTip <String>]
   [-MailTipTranslations <MultiValuedProperty>]
   [-ManagedBy <GeneralRecipientIdParameter>]
   [-MaxReceiveSize <Unlimited>]
   [-MaxSendSize <Unlimited>]
   [-ModeratedBy <MultiValuedProperty>]
   [-ModerationEnabled <Boolean>]
   [-Name <String>]
   [-Notes <String>]
   [-PhoneticDisplayName <String>]
   [-PrimarySmtpAddress <SmtpAddress>]
   [-RecipientContainer <OrganizationalUnitIdParameter>]
   [-RecipientFilter <String>]
   [-RejectMessagesFrom <MultiValuedProperty>]
   [-RejectMessagesFromDLMembers <MultiValuedProperty>]
   [-RejectMessagesFromSendersOrMembers <MultiValuedProperty>]
   [-ReportToManagerEnabled <Boolean>]
   [-ReportToOriginatorEnabled <Boolean>]
   [-RequireSenderAuthenticationEnabled <Boolean>]
   [-SendModerationNotifications <TransportModerationNotificationFlags>]
   [-SendOofMessageToOriginatorEnabled <Boolean>]
   [-SimpleDisplayName <String>]
   [-UMDtmfMap <MultiValuedProperty>]
   [-UpdateMemberCount]
   [-WhatIf]
   [-WindowsEmailAddress <SmtpAddress>]
   [<CommonParameters>]

Description

A dynamic distribution group queries mail-enabled objects and builds the group membership based on the results. The group membership is recalculated whenever an email message is sent to a group. You can use the Set-DynamicDistributionGroup cmdlet to overwrite existing settings or to add new settings.

The Conditional parameters that are used with the IncludedRecipients parameter are subject to the following limitations:

The EQV operator is used for every property value, as in "Department equals Sales". Wildcards and partial matches aren't supported.
The OR operator is always used for multiple values of the same property, as in "Department equals Sales OR Marketing".
The AND operator is always used for multiple properties, as in "Department equals Sales AND Company equals Contoso".

To create flexible filters that use any available recipient property and that aren't subject to these limitations, you can use the RecipientFilter parameter to create a custom OPATH filter.

You can't use this cmdlet to replace a precanned filter with a custom OPATH filter, or vice-versa. You can only modify the existing filter.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-DynamicDistributionGroup -Identity Developers -IncludedRecipients MailboxUsers -ConditionalCompany "Contoso" -ConditionalCustomAttribute1 "Internal"

This example applies the following changes to the existing dynamic distribution group named Developers:

Change the ConditionalCompany query filter to Contoso.
Change the IncludedRecipients query filter to MailboxUsers.
Add the value Internal to the ConditionalCustomAttribute1 attribute.

Example 2

$extAtrValue="Contoso"

Set-DynamicDistributionGroup -Identity Developers -RecipientFilter "ExtensionCustomAttribute1 -eq '$extAtrValue'"

This example applies the following changes to the existing dynamic distribution group named Developers:

Sets the RecipientFilter custom OPATH filter using a variable based value of a specific recipient property.

Parameters

-AcceptMessagesOnlyFrom

The AcceptMessagesOnlyFrom parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

You can enter multiple senders separated by commas. To overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

The senders you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-AcceptMessagesOnlyFromDLMembers

The AcceptMessagesOnlyFromDLMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group are allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

You can enter multiple groups separated by commas. To overwrite any existing entries, use the following syntax: Group1,Group2,...GroupN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Group1","Group2",..."GroupN".

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="Group1","Group2"...; Remove="Group3","Group4"...}.

The groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFromSendersOrMembers property. Therefore, you can't use the AcceptMessagesOnlyFromDLMembers and AcceptMessagesOnlyFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-AcceptMessagesOnlyFromSendersOrMembers

The AcceptMessagesOnlyFromSendersOrMembers parameter specifies who is allowed to send messages to this recipient. Messages from other senders are rejected.

Valid values for this parameter are individual senders and groups in your organization. Individual senders are mailboxes, mail users, and mail contacts. Groups are distribution groups, mail-enabled security groups, and dynamic distribution groups. Specifying a group means all members of the group are allowed to send messages to this recipient.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To add or remove individual senders or groups without affecting other existing entries, use the AcceptMessagesOnlyFrom and AcceptMessageOnlyFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the AcceptMessagesOnlyFrom and AcceptMessagesOnlyFromDLMembers properties, respectively. Therefore, you can't use the AcceptMessagesOnlyFromSendersOrMembers parameter and the AcceptMessagesOnlyFrom or AcceptMessagesOnlyFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Alias

The Alias parameter specifies the Exchange alias (also known as the mail nickname) for the recipient. This value identifies the recipient as a mail-enabled object, and shouldn't be confused with multiple email addresses for the same recipient (also known as proxy addresses). A recipient can have only one Alias value. The maximum length is 64 characters.

The Alias value can contain letters, numbers and the following characters:

!, #, %, *, +, -, /, =, ?, ^, _, and ~.
$, &, ', `, {, }, and | need to be escaped (for example -Alias what`'snew) or the entire value enclosed in single quotation marks (for example, -Alias 'what'snew'). The & character is not supported in the Alias value for Microsoft Entra Connect synchronization.
Periods (.) must be surrounded by other valid characters (for example, help.desk).
Unicode characters U+00A1 to U+00FF.

When you create a recipient without specifying an email address, the Alias value you specify is used to generate the primary email address (alias@domain). Supported Unicode characters are mapped to best-fit US-ASCII text characters. For example, U+00F6 (ö) is changed to oe in the primary email address.

If you don't use the Alias parameter when you create a recipient, the value of a different required parameter is used for the Alias property value:

Recipients with user accounts (for example, user mailboxes, and mail users): The left side of the MicrosoftOnlineServicesID or UserPrincipalName parameter is used. For example, helpdesk@contoso.onmicrosoft.com results in the Alias property value helpdesk.
Recipients without user accounts (for example, room mailboxes, mail contacts, and distribution groups): The value of the Name parameter is used. Spaces are removed and unsupported characters are converted to question marks (?).

If you modify the Alias value of an existing recipient, the primary email address is automatically updated only in environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is True for the recipient).

The Alias parameter never generates or updates the primary email address of a mail contact or a mail user.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ArbitrationMailbox

This parameter is available only in on-premises Exchange.

The ArbitrationMailbox parameter specifies the arbitration mailbox that's used to manage the moderation process for this recipient. You can use any value that uniquely identifies the arbitration mailbox. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Domain\Username
Email address
GUID
LegacyExchangeDN
SamAccountName
User ID or user principal name (UPN)

Type:	MailboxIdParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-BypassModerationFromSendersOrMembers

The BypassModerationFromSendersOrMembers parameter specifies who is allowed to send messages to this moderated recipient without approval from a moderator. Valid values for this parameter are individual senders and groups in your organization. Specifying a group means all members of the group are allowed to send messages to this recipient without approval from a moderator.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To enter multiple senders and overwrite any existing entries, use the following syntax: Sender1,Sender2,...SenderN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Sender1","Sender2",..."SenderN".

To add or remove one or more senders without affecting any existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

This parameter is meaningful only when moderation is enabled for the recipient. By default, this parameter is blank ($null), which means messages from all senders other than the designated moderators are moderated. When a moderator sends a message to this recipient, the message is isn't moderated. In other words, you don't need to use this parameter to include the moderators.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCompany

The ConditionalCompany parameter specifies a precanned filter that's based on the value of the recipient's Company property.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To enter multiple values that overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute1

The ConditionalCustomAttribute1 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute1 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute10

The ConditionalCustomAttribute10 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute10 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute11

The ConditionalCustomAttribute11 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute11 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute12

The ConditionalCustomAttribute12 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute12 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute13

The ConditionalCustomAttribute13 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute13 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute14

The ConditionalCustomAttribute14 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute14 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute15

The ConditionalCustomAttribute15 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute15 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute2

The ConditionalCustomAttribute2 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute2 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute3

The ConditionalCustomAttribute3 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute3 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute4

The ConditionalCustomAttribute4 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute4 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute5

The ConditionalCustomAttribute5 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute5 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute6

The ConditionalCustomAttribute6 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute6 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute7

The ConditionalCustomAttribute7 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute7 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute8

The ConditionalCustomAttribute8 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute8 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalCustomAttribute9

The ConditionalCustomAttribute9 parameter specifies a precanned filter that's based on the value of the recipient's CustomAttribute9 property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalDepartment

The ConditionalDepartment parameter specifies a precanned filter that's based on the value of the recipient's Department property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ConditionalStateOrProvince

The ConditionalStateOrProvince parameter specifies a precanned filter that's based on the value of the recipient's StateOrProvince property. You can specify multiple values separated by commas.

When you use multiple values for this parameter, the OR Boolean operator is applied. For more information about how Conditional parameters work, see the Detailed Description section of this topic.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CreateDTMFMap

This parameter is available only in on-premises Exchange.

The CreateDTMFMap parameter specifies whether to create a dual-tone multiple-frequency (DTMF) map for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Valid values are:

$true: A DTMF map is created for the recipient. This is the default value.
$false: A DTMF map isn't created for the recipient.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CustomAttribute1

This parameter specifies a value for the CustomAttribute1 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute10

This parameter specifies a value for the CustomAttribute10 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute11

This parameter specifies a value for the CustomAttribute11 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute12

This parameter specifies a value for the CustomAttribute12 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute13

This parameter specifies a value for the CustomAttribute13 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute14

This parameter specifies a value for the CustomAttribute14 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute15

This parameter specifies a value for the CustomAttribute15 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute2

This parameter specifies a value for the CustomAttribute2 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute3

This parameter specifies a value for the CustomAttribute3 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute4

This parameter specifies a value for the CustomAttribute4 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute5

This parameter specifies a value for the CustomAttribute5 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute6

This parameter specifies a value for the CustomAttribute6 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute7

This parameter specifies a value for the CustomAttribute7 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute8

This parameter specifies a value for the CustomAttribute8 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-CustomAttribute9

This parameter specifies a value for the CustomAttribute9 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. The maximum length is 1024 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DirectMembershipOnly

This parameter is available only in the cloud-based service.

This parameter is reserved for internal Microsoft use.

Type:	Boolean
Position:	Named
Default value:	False
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Online, Exchange Online Protection

-DisplayName

The DisplayName parameter specifies the display name of the dynamic distribution group. The display name is visible in the Exchange admin center and in address lists. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:	Fqdn
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-EmailAddresses

The EmailAddresses parameter specifies all email addresses (proxy addresses) for the recipient, including the primary SMTP address. In on-premises Exchange organizations, the primary SMTP address and other proxy addresses are typically set by email address policies. However, you can use this parameter to configure other proxy addresses for the recipient. For more information, see Email address policies in Exchange Server.

Valid syntax for this parameter is "Type:EmailAddress1","Type:EmailAddress2",..."Type:EmailAddressN". The optional Type value specifies the type of email address. Examples of valid values include:

SMTP: The primary SMTP address. You can use this value only once in a command.
smtp: Other SMTP email addresses.
X400: X.400 addresses in on-premises Exchange.
X500: X.500 addresses in on-premises Exchange.

If you don't include a Type value for an email address, the address is assumed to be an SMTP email address. The syntax of SMTP email addresses is validated, but the syntax of other email address types isn't validated. Therefore, you need to verify that any custom addresses are formatted correctly.

To specify the primary SMTP email address, you can use any of the following methods:

Use the Type value SMTP on the address.
The first email address when you don't use any Type values, or when you use multiple lowercase smtp Type values.
Use the PrimarySmtpAddress parameter instead. You can't use the EmailAddresses parameter and the PrimarySmtpAddress parameter in the same command.

The PrimarySmtpAddress parameter updates the primary email address and WindowsEmailAddress property to the same value.

To replace all existing proxy email addresses with the values you specify, use the following syntax: "Type:EmailAddress1","Type:EmailAddress2",..."Type:EmailAddressN".

To add or remove specify proxy addresses without affecting other existing values, use the following syntax: @{Add="Type:EmailAddress1","Type:EmailAddress2",...; Remove="Type:EmailAddress3","Type:EmailAddress4",...}.

Type:	ProxyAddressCollection
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-EmailAddressPolicyEnabled

This parameter is available only in on-premises Exchange.

The EmailAddressPolicyEnabled parameter specifies whether to apply email address policies to this recipient. Valid values are:

$true: Email address policies are applied to this recipient. This is the default value.
$false: Email address policies aren't applied to this recipient.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExpansionServer

This parameter is available only in on-premises Exchange.

The ExpansionServer parameter specifies the Exchange server that's used to expand the distribution group. The default value is blank ($null), which means expansion happens on the closest available Exchange server. If you specify an expansion server, and that server is unavailable, any messages that are sent to the distribution group can't be delivered.

You can specify the following types of servers as expansion servers:

An Exchange 2013 or later Mailbox server.
An Exchange 2010 Hub Transport server.

When you specify an expansion server, use the ExchangeLegacyDN. You can find this value by running the command: Get-ExchangeServer <ServerName> | Format-List ExchangeLegacyDN. An example value for this parameter is "/o=Contoso/ou=Exchange Administrative Group(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Mailbox01".

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExtensionCustomAttribute1

This parameter specifies a value for the ExtensionCustomAttribute1 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute1 -eq 'Value'" will return a match if the property contains the specified value.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExtensionCustomAttribute2

This parameter specifies a value for the ExtensionCustomAttribute2 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute2 -eq 'Value'" will return a match if the property contains the specified value.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExtensionCustomAttribute3

This parameter specifies a value for the ExtensionCustomAttribute3 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute3 -eq 'Value'" will return a match if the property contains the specified value.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExtensionCustomAttribute4

This parameter specifies a value for the ExtensionCustomAttribute4 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute4 -eq 'Value'" will return a match if the property contains the specified value.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ExtensionCustomAttribute5

This parameter specifies a value for the ExtensionCustomAttribute5 property on the recipient. You can use this property to store custom information about the recipient, and to identify the recipient in filters. You can specify up to 1300 values separated by commas.

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

Although this is a multivalued property, the filter "ExtensionCustomAttribute5 -eq 'Value'" will return a match if the property contains the specified value.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ForceMembershipRefresh

This parameter is available only in the cloud-based service.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Online, Exchange Online Protection

-ForceUpgrade

The ForceUpgrade switch suppresses the confirmation message that appears if the object was created in a previous version of Exchange. You don't need to specify a value with this switch.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-GrantSendOnBehalfTo

The GrantSendOnBehalfTo parameter specifies who can send on behalf of this dynamic distribution group. Although messages send on behalf of the group clearly show the sender in the From field (<Sender> on behalf of <Group>), replies to these messages are delivered to the group, not the sender.

The sender you specify for this parameter must a mailbox, mail user or mail-enabled security group (a mail-enabled security principal that can have permissions assigned). You can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Domain\Username
Email address
GUID
LegacyExchangeDN
SamAccountName
User ID or user principal name (UPN)

To enter multiple values and overwrite any existing entries, use the following syntax: Value1,Value2,...ValueN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

By default, this parameter is blank, which means no one else has permission to send on behalf of this group.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-HiddenFromAddressListsEnabled

The HiddenFromAddressListsEnabled parameter specifies whether this recipient is visible in address lists. Valid values are:

$true: The recipient isn't visible in address lists.
$false: The recipient is visible in address lists. This is the default value.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Identity

The Identity parameter specifies the dynamic distribution group that you want to modify. You can use any value that uniquely identifies the dynamic distribution group. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

Type:	DynamicGroupIdParameter
Position:	1
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-IgnoreDefaultScope

This parameter is available only in on-premises Exchange.

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IncludedRecipients

The IncludedRecipients parameter specifies a precanned filter that's based on the recipient type. Valid values are:

AllRecipients: This value can be used only by itself.
MailboxUsers
MailContacts
MailGroups
MailUsers
Resources: This value indicates room or equipment mailboxes.

You can specify multiple values separated by commas. When you use multiple values, the OR Boolean operator is applied.

Type:	WellKnownRecipientType
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-MailTip

The MailTip parameter specifies the custom MailTip text for this recipient. The MailTip is shown to senders when they start drafting an email message to this recipient. If the value contains spaces, enclose the value in quotation marks (").

When you add a MailTip to a recipient, two things happen:

HTML tags are automatically added to the text. For example, if you enter the text: "This mailbox is not monitored", the MailTip automatically becomes: <html><body>This mailbox is not monitored</body></html>. Additional HTML tags aren't supported, and the length of the MailTip can't exceed 175 displayed characters.
The text is automatically added to the MailTipTranslations property of the recipient as the default value: default:<MailTip text>. If you modify the MailTip text, the default value is automatically updated in the MailTipTranslations property, and vice-versa.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-MailTipTranslations

The MailTipTranslations parameter specifies additional languages for the custom MailTip text that's defined by the MailTip parameter. HTML tags are automatically added to the MailTip translation, additional HTML tags aren't supported, and the length of the MailTip translation can't exceed 175 displayed characters.

To add or remove MailTip translations without affecting the default MailTip or other MailTip translations, use the following syntax:

@{Add="Culture1:Localized text 1","\Culture2:Localized text 2"...; Remove="Culture3:Localized text 3","Culture4:Localized text 4"...}.

CultureN is a valid ISO 639 two-letter culture code that's associated with the language.

For example, suppose this recipient currently has the MailTip text: "This mailbox is not monitored." To add the Spanish translation, use the following value for this parameter: @{Add="ES:Esta caja no se supervisa."}.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ManagedBy

The ManagedBy parameter specifies an owner for the group. A dynamic group can only have one owner. The group owner is able to:

Modify the properties of the group
Delete the group
Approve messages sent to the group if moderation is enabled, but no moderators are specified.

The owner you specify for this parameter must be a mailbox, mail user or mail-enabled security group (a mail-enabled security principal that can have permissions assigned). You can use any value that uniquely identifies the owner. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Domain\Username
Email address
GUID
LegacyExchangeDN
SamAccountName
User ID or user principal name (UPN)

Type:	GeneralRecipientIdParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-MaxReceiveSize

This parameter is available only in on-premises Exchange.

The MaxReceiveSize parameter specifies the maximum allowed email message size that can be sent to this group.

When you enter a value, qualify the value with one of the following units:

B (bytes)
KB (kilobytes)
MB (megabytes)
GB (gigabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited, which indicates the maximum size is imposed elsewhere (for example, organization, server, or connector limits).

Base64 encoding increases the size of messages by approximately 33%, so specify a value that's 33% larger than the actual maximum message size that you want to enforce. For example, the value 64 MB results in a maximum message size of approximately 48 MB.

Type:	Unlimited
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MaxSendSize

This parameter is available only in on-premises Exchange.

The MaxSendSize parameter specifies the maximum allowed email message size that can be sent from this group.

When you enter a value, qualify the value with one of the following units:

B (bytes)
KB (kilobytes)
MB (megabytes)
GB (gigabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

Type:	Unlimited
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ModeratedBy

The ModeratedBy parameter specifies one or more moderators for this recipient. A moderator approves messages sent to the recipient before the messages are delivered. A moderator must be a mailbox, mail user, or mail contact in your organization. You can use any value that uniquely identifies the moderator. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="Value1","Value2"...; Remove="Value3","Value4"...}.

You need to use this parameter to specify at least one moderator when you set the ModerationEnabled parameter to the value $true.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ModerationEnabled

The ModerationEnabled parameter specifies whether moderation is enabled for this recipient. Valid value are:

$true: Moderation is enabled for this recipient. Messages sent to this recipient must be approved by a moderator before the messages are delivered.
$false: Moderation is disabled for this recipient. Messages sent to this recipient are delivered without the approval of a moderator. This is the default value.

You use the ModeratedBy parameter to specify the moderators.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Name

The Name parameter specifies the unique name of the dynamic distribution group. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Notes

The Notes parameters specifies additional information about the object. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PhoneticDisplayName

The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PrimarySmtpAddress

The PrimarySmtpAddress parameter specifies the primary return email address that's used for the recipient. You can't use the EmailAddresses and PrimarySmtpAddress parameters in the same command.

If you set the EmailAddressPolicyEnabled parameter to $false, you can specify the primary address using the PrimarySmtpAddress parameter, but the email addresses of the group are no longer automatically updated by email address policies.

The PrimarySmtpAddress parameter updates the primary email address and WindowsEmailAddress property to the same value.

Type:	SmtpAddress
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RecipientContainer

The RecipientContainer parameter specifies a filter that's based on the recipient's location in Active Directory. Valid input for this parameter is an organizational unit (OU) or domain that's returned by the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:

Name
Canonical name
Distinguished name (DN)
GUID

If you don't use this parameter, the default value is the OU where the object was created.

Note that the RecipientContainer property can't be blank. The group is always limited to looking for recipients in a specific location (the value you specify for this parameter, or the location where the group was created).

Type:	OrganizationalUnitIdParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RecipientFilter

The RecipientFilter parameter specifies a custom OPATH filter that's based on the value of any available recipient property. You can use any available Windows PowerShell operator, and wildcards and partial matches are supported. The search criteria uses the syntax "Property -ComparisonOperator 'Value'".

Enclose the whole OPATH filter in double quotation marks " ". If the filter contains system values (for example, $true, $false, or $null), use single quotation marks ' ' instead. Although this parameter is a string (not a system block), you can also use braces { }, but only if the filter doesn't contain variables.
Property is a filterable property. For filterable properties, see Filterable properties for the RecipientFilter parameter.
Value is the property value to filter on. Enclose text values and variables in single quotation marks ('Value' or '$Variable'). If a variable value contains single quotation marks, you need to identify (escape) the single quotation marks to expand the variable correctly. For example, instead of '$User', use '$($User -Replace "'","''")'. Don't enclose integers or system values in quotation marks (for example, use 500, $true, $false, or $null instead).
ComparisonOperator is an OPATH comparison operator (for example -eq for equals and -like for string comparison). For more information about comparison operators, see about_Comparison_Operators.
In cloud-based environments, you can't use a wildcard as the first character. For example, 'Sales*' is allowed, but '*Sales' isn't allowed.
In on-premises Exchange, wildcards are valid only as the first or last character. For example, 'Sales*' or '*Sales' are allowed, but 'Sa*les' isn't allowed.

For detailed information about OPATH filters in Exchange, see Additional OPATH syntax information.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RejectMessagesFrom

The RejectMessagesFrom parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are individual senders in your organization (mailboxes, mail users, and mail contacts). You can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To add or remove senders without affecting other existing entries, use the following syntax: @{Add="Sender1","Sender2"...; Remove="Sender3","Sender4"...}.

The senders you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFrom and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RejectMessagesFromDLMembers

The RejectMessagesFromDLMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

Valid values for this parameter are groups in your organization (distribution groups, mail-enabled security groups, and dynamic distribution groups). Specifying a group means all members of the group aren't allowed to send messages to this recipient. You can use any value that uniquely identifies the group. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To add or remove groups without affecting other existing entries, use the following syntax: @{Add="Group1","Group2"...; Remove="Group3","Group4"...}.

The groups you specify for this parameter are automatically copied to the RejectMessagesFromSendersOrMembers property. Therefore, you can't use the RejectMessagesFromDLMembers and RejectMessagesFromSendersOrMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all groups.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RejectMessagesFromSendersOrMembers

The RejectMessagesFromSendersOrMembers parameter specifies who isn't allowed to send messages to this recipient. Messages from these senders are rejected.

To specify senders for this parameter, you can use any value that uniquely identifies the sender. For example:

Name
Alias
Distinguished name (DN)
Canonical DN
Email address
GUID

To add or remove individual senders or groups without affecting other existing entries, use the RejectMessagesFrom and RejectMessagesFromDLMembers parameters.

The individual senders and groups you specify for this parameter are automatically copied to the RejectMessagesFrom and RejectMessagesFromDLMembers properties, respectively. Therefore, you can't use the RejectMessagesFromSendersOrMembers parameter and the RejectMessagesFrom or RejectMessagesFromDLMembers parameters in the same command.

By default, this parameter is blank ($null), which allows this recipient to accept messages from all senders.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ReportToManagerEnabled

The ReportToManagerEnabled parameter specifies whether delivery status notifications (also known as DSNs, non-delivery reports, NDRs, or bounce messages) are sent to the owners of the group (defined by the ManagedBy property). Valid values are:

$true: Delivery status notifications are sent to the owners of the group.
$false: Delivery status notifications aren't sent to the owners of the group. This is the default value.

The ReportToManagerEnabled and ReportToOriginatorEnabled parameters affect the return path for messages sent to the group. Some email servers reject messages that don't have a return path. Therefore, you should set one parameter to $false and one to $true, but not both to $false or both to $true.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ReportToOriginatorEnabled

The ReportToOriginatorEnabled parameter specifies whether delivery status notifications (also known as DSNs, non-delivery reports, NDRs, or bounce messages) are sent to senders who send messages to this group. Valid values are:

$true: Delivery status notifications are sent to the message senders. This is the default value.
$false: Delivery status notifications aren't sent to the message senders.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-RequireSenderAuthenticationEnabled

The RequireSenderAuthenticationEnabled parameter specifies whether to accept messages only from authenticated (internal) senders. Valid values are:

$true: Messages are accepted only from authenticated (internal) senders. Messages from unauthenticated (external) senders are rejected.
$false: Messages are accepted from authenticated (internal) and unauthenticated (external) senders.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SendModerationNotifications

The SendModerationNotifications parameter specifies when moderation notification messages are sent. Valid values are:

Always: Notify all senders when their messages aren't approved. This is the default value.
Internal: Notify senders in the organization when their messages aren't approved.
Never: Don't notify anyone when a message isn't approved.

This parameter is only meaningful when moderation is enabled (the ModerationEnabled parameter has the value $true).

Type:	TransportModerationNotificationFlags
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SendOofMessageToOriginatorEnabled

The SendOofMessageToOriginatorEnabled parameter specifies how to handle out of office (OOF) messages for members of the group. Valid values are:

$true: When messages are sent to the group, OOF messages for any of the group members are sent to the message sender. This is the default value.
$false: When messages are sent to the group, OOF messages for any of the group members aren't sent to the message sender.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SimpleDisplayName

The SimpleDisplayName parameter is used to display an alternative description of the object when only a limited set of characters is permitted. Valid characters are:

a - z
A - Z
0 - 9
space
" ' ( ) + , - . / : ?

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-UMDtmfMap

This parameter is available only in on-premises Exchange.

The UMDtmfMap parameter specifies the dual-tone multiple-frequency (DTMF) map values for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Typically, these DTMF values are automatically created and updated, but you can use this parameter to make changes manually. This parameter uses the following syntax:

emailAddress:<integers>
lastNameFirstName:<integers>
firstNameLastName:<integers>

To enter values that overwrite all existing entries, use the following syntax: emailAddress:<integers>,lastNameFirstName:<integers>,firstNameLastName:<integers>.

If you use this syntax and you omit any of the DTMF map values, those values are removed from the recipient. For example, if you specify only emailAddress:<integers>, all existing lastNameFirstName and firstNameLastName values are removed.

To add or remove values without affecting other existing entries, use the following syntax: @{Add="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"; Remove="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"}.

If you use this syntax, you don't need to specify all of the DTMF map values, and you can specify multiple DTMF map values. For example, you can use @{Add="emailAddress:<integers1>","emailAddress:<integers2>} to add two new values for emailAddress without affecting the existing lastNameFirstName and firstNameLastName values.

Type:	MultiValuedProperty
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-UpdateMemberCount

This parameter is available only in the cloud-based service.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Online, Exchange Online Protection

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WindowsEmailAddress

The WindowsEmailAddress parameter specifies the Windows email address for this recipient. This is a common Active Directory attribute that's present in all environments, including environments without Exchange. Using the WindowsEmailAddress parameter on a recipient has one of the following results:

In environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is set to the value True for the recipient), the WindowsEmailAddress parameter has no effect on the WindowsEmailAddress property or the primary email address value.
In environments where the recipient isn't subject to email address policies (the EmailAddressPolicyEnabled property is set to the value False for the recipient), the WindowsEmailAddress parameter updates the WindowsEmailAddress property and the primary email address to the same value.

The WindowsEmailAddress property is visible for the recipient in Active Directory Users and Computers in the E-mail attribute. The attribute common name is E-mail-Addresses, and the Ldap-Display-Name is mail. If you modify this attribute in Active Directory, the recipient's primary email address is not updated to the same value.

Type:	SmtpAddress
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.

Κοινή χρήση μέσω

Set-DynamicDistributionGroup

Syntax

Description

Examples

Example 1

Example 2

Parameters

-AcceptMessagesOnlyFrom

-AcceptMessagesOnlyFromDLMembers

-AcceptMessagesOnlyFromSendersOrMembers

-Alias

-ArbitrationMailbox

-BypassModerationFromSendersOrMembers

-ConditionalCompany

-ConditionalCustomAttribute1

-ConditionalCustomAttribute10

-ConditionalCustomAttribute11

-ConditionalCustomAttribute12

-ConditionalCustomAttribute13

-ConditionalCustomAttribute14

-ConditionalCustomAttribute15

-ConditionalCustomAttribute2

-ConditionalCustomAttribute3

-ConditionalCustomAttribute4

-ConditionalCustomAttribute5

-ConditionalCustomAttribute6

-ConditionalCustomAttribute7

-ConditionalCustomAttribute8

-ConditionalCustomAttribute9

-ConditionalDepartment

-ConditionalStateOrProvince

-Confirm

-CreateDTMFMap

-CustomAttribute1

-CustomAttribute10

-CustomAttribute11

-CustomAttribute12

-CustomAttribute13

-CustomAttribute14

-CustomAttribute15

-CustomAttribute2

-CustomAttribute3

-CustomAttribute4

-CustomAttribute5

-CustomAttribute6

-CustomAttribute7

-CustomAttribute8

-CustomAttribute9

-DirectMembershipOnly

-DisplayName

-DomainController

-EmailAddresses

-EmailAddressPolicyEnabled

-ExpansionServer

-ExtensionCustomAttribute1

-ExtensionCustomAttribute2

-ExtensionCustomAttribute3

-ExtensionCustomAttribute4

-ExtensionCustomAttribute5

-ForceMembershipRefresh

-ForceUpgrade

-GrantSendOnBehalfTo

-HiddenFromAddressListsEnabled

-Identity

-IgnoreDefaultScope

-IncludedRecipients

-MailTip

-MailTipTranslations

-ManagedBy

-MaxReceiveSize

-MaxSendSize

-ModeratedBy

-ModerationEnabled

-Name

-Notes

-PhoneticDisplayName

-PrimarySmtpAddress

-RecipientContainer

-RecipientFilter