Επεξεργασία

Κοινή χρήση μέσω


Set-DatabaseAvailabilityGroup

This cmdlet is available only in on-premises Exchange.

Use the Set-DatabaseAvailabilityGroup cmdlet to configure properties of a database availability group (DAG).

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-DatabaseAvailabilityGroup
   [-Identity] <DatabaseAvailabilityGroupIdParameter>
   [-ActivityState <ActivityStateOption>]
   [-AllowCrossSiteRpcClientAccess]
   [-AlternateWitnessDirectory <NonRootLocalLongFullPath>]
   [-AlternateWitnessServer <FileShareWitnessServerName>]
   [-AutoDagAllServersInstalled <Boolean>]
   [-AutoDagAutoRedistributeEnabled <Boolean>]
   [-AutoDagAutoReseedEnabled <Boolean>]
   [-AutoDagBitlockerEnabled <Boolean>]
   [-AutoDagDatabaseCopiesPerDatabase <Int32>]
   [-AutoDagDatabaseCopiesPerVolume <Int32>]
   [-AutoDagDatabasesRootFolderPath <NonRootLocalLongFullPath>]
   [-AutoDagDiskReclaimerEnabled <Boolean>]
   [-AutoDagTotalNumberOfDatabases <Int32>]
   [-AutoDagTotalNumberOfServers <Int32>]
   [-AutoDagVolumesRootFolderPath <NonRootLocalLongFullPath>]
   [-Confirm]
   [-DagConfiguration <DatabaseAvailabilityGroupConfigurationIdParameter>]
   [-DatabaseAvailabilityGroupIpAddresses <IPAddress[]>]
   [-DatacenterActivationMode <DatacenterActivationModeOption>]
   [-DiscoverNetworks]
   [-DomainController <Fqdn>]
   [-FileSystem <FileSystemMode>]
   [-ManualDagNetworkConfiguration <Boolean>]
   [-MetaCacheDatabaseVolumesPerServer <Int32>]
   [-NetworkCompression <NetworkOption>]
   [-NetworkEncryption <NetworkOption>]
   [-PreferenceMoveFrequency <TimeSpan>]
   [-ReplayLagManagerEnabled <Boolean>]
   [-ReplicationPort <UInt16>]
   [-SkipDagValidation]
   [-WhatIf]
   [-WitnessDirectory <NonRootLocalLongFullPath>]
   [-WitnessServer <FileShareWitnessServerName>]
   [<CommonParameters>]

Description

The Set-DatabaseAvailabilityGroup cmdlet enables you to manage DAG properties that can't be managed from the Exchange admin center (EAC), such as configuring network discovery, selecting the TCP port used for replication and enabling datacenter activation coordination (DAC) mode.

DAG property values are stored in both Active Directory and the cluster database. Because some properties are stored in the cluster database, the underlying cluster for the DAG must have quorum to set the properties for:

  • ReplicationPort
  • NetworkCompression
  • NetworkEncryption
  • DiscoverNetworks

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-DatabaseAvailabilityGroup -Identity DAG1 -WitnessDirectory C:\DAG1DIR

This example sets the witness directory to C:\DAG1DIR for the DAG DAG1.

Example 2

Set-DatabaseAvailabilityGroup -Identity DAG1 -AlternateWitnessDirectory C:\DAGFileShareWitnesses\DAG1.contoso.com -AlternateWitnessServer CAS3

This example preconfigures an alternate witness server of CAS3 and an alternate witness directory of C:\DAGFileShareWitnesses\DAG1.contoso.com for the DAG DAG1.

Example 3

Set-DatabaseAvailabilityGroup -Identity DAG1 -DatabaseAvailabilityGroupIpAddresses 0.0.0.0

This example configures the DAG DAG1 to use DHCP to obtain an IP address.

Example 4

Set-DatabaseAvailabilityGroup -Identity DAG1 -DatabaseAvailabilityGroupIpAddresses 10.0.0.8

This example configures the DAG DAG1 to use a static IP address of 10.0.0.8.

Example 5

Set-DatabaseAvailabilityGroup -Identity DAG1 -DatabaseAvailabilityGroupIpAddresses 10.0.0.8,10.0.1.8

This example configures the multi-subnet DAG DAG1 with multiple static IP addresses.

Example 6

Set-DatabaseAvailabilityGroup -Identity DAG1 -ReplicationPort 63132

This example configures TCP port 63132 as the port used by replication for the DAG DAG1.

After changing the default replication port for a DAG, you must manually modify the Windows Firewall exceptions on each member of the DAG to allow communication to occur over the specified port.

Example 7

Set-DatabaseAvailabilityGroup -Identity DAG1 -DatacenterActivationMode DagOnly

This example configures the DAG DAG1 for DAC mode.

Example 8

Set-DatabaseAvailabilityGroup -Identity DAG1 -AutoDagVolumesRootFolderPath C:\ExchVols -AutoDagDatabasesRootFolderPath C:\ExchDBs -AutoDagDatabaseCopiesPerVolume 4

This example configures the DAG DAG1 for AutoReseed using custom mount point paths and 4 databases per volume.

Parameters

-ActivityState

This parameter is reserved for internal Microsoft use.

Type:ActivityStateOption
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-AllowCrossSiteRpcClientAccess

This parameter is reserved for internal Microsoft use.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AlternateWitnessDirectory

The AlternateWitnessDirectory parameter specifies the name of an alternate directory that's used to store file share witness data. The specified directory must not be in use by any other DAGs or used for any other purpose. This parameter is used only as part of a datacenter switchover process. If the DAG is extended across multiple datacenters in a site resilience configuration, we recommend preconfiguring the alternate witness server and directory.

Type:NonRootLocalLongFullPath
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AlternateWitnessServer

The AlternateWitnessServer parameter specifies the name of an alternate server that's used to store file share witness data. The specified server must not be a member of the DAG that's configured to use it. This parameter is used only as part of a datacenter switchover process. If the DAG is extended across multiple datacenters in a site resilience configuration, we recommend preconfiguring the alternate witness server and directory.

Type:FileShareWitnessServerName
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagAllServersInstalled

This parameter is reserved for internal Microsoft use.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagAutoRedistributeEnabled

The AutoDagAutoRedistributeEnabled parameter specifies whether automatic DAG redistribution is enabled or disabled during AutoReseed. The default value is $true (enabled).

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-AutoDagAutoReseedEnabled

The AutoDagAutoReseedEnabled is used to enable or disable Autoreseed. The default value is $true (enabled).

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagBitlockerEnabled

The AutoDagBitlockerEnabled parameter ensures that Disk Reclaimer handles spare disks correctly and encrypts them with BitLocker. If Bitlocker is used to encrypt database disks, set the value of this parameter to $true on all Mailbox servers in the DAG after they are all running Exchange 2013 CU13 or later, or Exchange 2016 CU2 or later.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagDatabaseCopiesPerDatabase

This parameter is reserved for internal Microsoft use.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagDatabaseCopiesPerVolume

The AutoDagDatabaseCopiesPerVolume parameter is used to specify the configured number of database copies per volume. This parameter is used only with AutoReseed.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagDatabasesRootFolderPath

The AutoDagDatabasesRootFolderPath parameter specifies the directory containing the database mount points when using AutoReseed. This parameter is required when using AutoReseed. AutoReseed uses a default path of C:\ExchangeDatabases.

Type:NonRootLocalLongFullPath
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagDiskReclaimerEnabled

The AutoDagDiskReclaimerEnabled is used to enable or disable the volume formatting functions used by Autoreseed. The default value is $true (enabled). If you set this to $false, you will need to manually format the volume before the database(s) can be reseeded.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagTotalNumberOfDatabases

This parameter is reserved for internal Microsoft use.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagTotalNumberOfServers

This parameter is reserved for internal Microsoft use.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagVolumesRootFolderPath

The AutoDagVolumesRootFolderPath parameter specifies the volume containing the mount points for all disks, including spare disks, when using the AutoReseed feature of the DAG. This parameter is required when using AutoReseed. AutoReseed uses a default path of C:\ExchangeVolumes.

Type:NonRootLocalLongFullPath
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DagConfiguration

This parameter is reserved for internal Microsoft use.

Type:DatabaseAvailabilityGroupConfigurationIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DatabaseAvailabilityGroupIpAddresses

The DatabaseAvailabilityGroupIpAddresses parameter specifies one or more static IP addresses to the DAG when a Mailbox server is added to a DAG. If you omit the DatabaseAvailabilityGroupIpAddresses parameter when creating a DAG, the system attempts to lease one or more IP addresses from a Dynamic Host Configuration Protocol (DHCP) server in your organization to assign to the DAG. You must specify this parameter each time an additional IP address is added to the DAG, such as in the case of multi-subnet DAGs. You must also specify all IP addresses previously assigned to the DAG each time the DatabaseAvailabilityGroupIpAddresses parameter is used. Setting the DatabaseAvailabilityGroupIpAddresses parameter to a value of 0.0.0.0 automatically configures the DAG to use DHCP.

Type:IPAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DatacenterActivationMode

The DatacenterActivationMode parameter specifies the datacenter activation mode for the DAG. Valid values are:

  • Off: Datacenter activation mode is disabled.
  • DagOnly: Datacenter activation mode is enabled.
Type:DatacenterActivationModeOption
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DiscoverNetworks

The DiscoverNetworks switch specifies whether to force a rediscovery of the network and network interfaces. You don't need to specify a value with this switch.

By default, internal network heartbeats are sent between DAG members on the same subnet. If there's no response to the heartbeats, network discovery is performed automatically by the system. If you add or remove networks or change DAG network subnets, you can force rediscovery of all DAG networks by using the DiscoverNetworks switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-FileSystem

The FileSystem parameter specifies the file system that's used for the DAG. Valid values are:

  • NTFS
  • ReFS
Type:FileSystemMode
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the name of the DAG that you want to modify.

Type:DatabaseAvailabilityGroupIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ManualDagNetworkConfiguration

The ManualDagNetworkConfiguration parameter specifies whether DAG networks should be automatically configured. If this parameter is set to $false, DAG networks are automatically configured. If this parameter is set to $true, you must manually configure DAG networks.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MetaCacheDatabaseVolumesPerServer

This parameter is reserved for internal Microsoft use.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2019

-NetworkCompression

The NetworkCompression parameter specifies the network compression option for the DAG. Valid values are:

  • Disabled: Network compression is disabled on all networks.
  • Enabled: Network compression is enabled on all networks.
  • InterSubnetOnly: Network compression is enabled only for inter-subnet communication.
  • SeedOnly: Network compression is enabled only for seeding.
Type:NetworkOption
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-NetworkEncryption

The NetworkEncryption parameter specifies the network encryption option for the DAG. Valid values are:

  • Disabled: Network encryption is disabled on all networks.
  • Enabled: Network encryption is enabled on all networks.
  • InterSubnetOnly: Network encryption is enabled only for inter-subnet communication.
  • SeedOnly: Network encryption is enabled only for seeding.
Type:NetworkOption
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-PreferenceMoveFrequency

The PreferenceMoveFrequency parameter specifies how frequently the Microsoft Exchange Replication service inspects and automatically rebalances the database copies. If the most preferred database copy (ActivationPreference value of 1) isn't the active copy, the most preferred database copy is activated by performing a lossless switchover.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes and ss = seconds.

The default value is 01:00:00 (1 hour). To disable this feature, specify the value ([System.Threading.Timeout]::InfiniteTimeSpan).

Important: Don't specify a value larger than 49.7 days. A larger value will crash MSExchangeRepl.exe with an ArgumentOutOfRangeException error on all DAG members.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-ReplayLagManagerEnabled

The ReplayLagManagerEnabled parameter specifies whether to disable the automatic playdown of log files for a lagged database copy.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ReplicationPort

The ReplicationPort parameter specifies a Transmission Control Protocol (TCP) port for replication (log shipping and seeding) activity. If this parameter isn't specified, the default port for replication is TCP 64327.

Type:UInt16
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-SkipDagValidation

The SkipDagValidation switch specifies whether to bypass the validation of the DAG's quorum model and the health check on the DAG's witness when configuring the DAG. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WitnessDirectory

The WitnessDirectory parameter specifies the name of the directory on the server that's used to store file share witness data. The specified directory must not be in use by any other DAGs.

Type:NonRootLocalLongFullPath
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WitnessServer

The WitnessServer parameter specifies the name of a server that will act as a witness for the DAG. The server specified can't be a member of the DAG.

Type:FileShareWitnessServerName
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.