Set-AutoSensitivityLabelRule
This cmdlet is available only in Security & Compliance PowerShell. For more information, see Security & Compliance PowerShell.
Use the Set-AutoSensitivityLabelPolicy cmdlet to modify auto-labeling policy rules in your organization.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Set-AutoSensitivityLabelRule
[-Identity] <ComplianceRuleIdParameter>
[-AccessScope <AccessScope>]
[-ActivationDate <System.DateTime>]
[-AnyOfRecipientAddressContainsWords <MultiValuedProperty>]
[-AnyOfRecipientAddressMatchesPatterns <MultiValuedProperty>]
[-Comment <String>]
[-Confirm]
[-ContentContainsSensitiveInformation <PswsHashtable[]>]
[-ContentExtensionMatchesWords <MultiValuedProperty>]
[-ContentPropertyContainsWords <MultiValuedProperty>]
[-DefaultSpoDocLibraryHasLabel <Boolean>]
[-Disabled <Boolean>]
[-DocumentCreatedBy <MultiValuedProperty>]
[-DocumentIsPasswordProtected <Boolean>]
[-DocumentIsUnsupported <Boolean>]
[-DocumentNameMatchesWords <MultiValuedProperty>]
[-DocumentSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
[-ExceptIfAccessScope <AccessScope>]
[-ExceptIfAnyOfRecipientAddressContainsWords <MultiValuedProperty>]
[-ExceptIfAnyOfRecipientAddressMatchesPatterns <MultiValuedProperty>]
[-ExceptIfContentContainsSensitiveInformation <PswsHashtable[]>]
[-ExceptIfContentExtensionMatchesWords <MultiValuedProperty>]
[-ExceptIfContentPropertyContainsWords <MultiValuedProperty>]
[-ExceptIfDocumentCreatedBy <MultiValuedProperty>]
[-ExceptIfDocumentIsPasswordProtected <Boolean>]
[-ExceptIfDocumentIsUnsupported <Boolean>]
[-ExceptIfDocumentNameMatchesWords <MultiValuedProperty>]
[-ExceptIfDocumentSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
[-ExceptIfFrom <RecipientIdParameter[]>]
[-ExceptIfFromAddressContainsWords <MultiValuedProperty>]
[-ExceptIfFromAddressMatchesPatterns <MultiValuedProperty>]
[-ExceptIfFromMemberOf <SmtpAddress[]>]
[-ExceptIfHeaderMatchesPatterns <PswsHashtable>]
[-ExceptIfProcessingLimitExceeded <Boolean>]
[-ExceptIfRecipientDomainIs <MultiValuedProperty>]
[-ExceptIfSenderDomainIs <MultiValuedProperty>]
[-ExceptIfSenderIPRanges <MultiValuedProperty>]
[-ExceptIfSentTo <MultiValuedProperty>]
[-ExceptIfSentToMemberOf <RecipientIdParameter[]>]
[-ExceptIfSubjectMatchesPatterns <MultiValuedProperty>]
[-ExpiryDate <System.DateTime>]
[-From <RecipientIdParameter[]>]
[-FromAddressContainsWords <MultiValuedProperty>]
[-FromAddressMatchesPatterns <MultiValuedProperty>]
[-FromMemberOf <SmtpAddress[]>]
[-HeaderMatchesPatterns <PswsHashtable>]
[-Priority <System.Int32>]
[-ProcessingLimitExceeded <Boolean>]
[-RecipientDomainIs <MultiValuedProperty>]
[-ReportSeverityLevel <RuleSeverity>]
[-RuleErrorAction <PolicyRuleErrorAction>]
[-SenderDomainIs <MultiValuedProperty>]
[-SenderIPRanges <MultiValuedProperty>]
[-SentTo <MultiValuedProperty>]
[-SentToMemberOf <RecipientIdParameter[]>]
[-SourceType <String>]
[-SubjectMatchesPatterns <MultiValuedProperty>]
[-WhatIf]
[-Workload <Workload>]
[<CommonParameters>] Description
To use this cmdlet in Security & Compliance PowerShell, you need to be assigned permissions. For more information, see Permissions in the Microsoft Purview compliance portal.
Examples
Example 1
Set-AutoSensitivityLabelRule -Identity "SocialSecurityRule1" -Comment "Example"This example changes the rule property "Comment" with the rule name "SocialSecurityRule1" to the text "Example".
Parameters
-AccessScope
The AccessScope parameter specifies a condition for the auto-labeling policy rule that's based on the access scope of the content. The rule is applied to content that matches the specified access scope. Valid values are:
- InOrganization: The rule is applied to content that's accessible inside the organization.
- NotInOrganization: The rule is applied to content that's accessible outside the organization.
- None: The condition isn't used.
| Type: | AccessScope |
| Accepted values: | InOrganization, NotInOrganization, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ActivationDate
{{ Fill ActivationDate Description }}
| Type: | System.DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-AnyOfRecipientAddressContainsWords
The AnyOfRecipientAddressContainsWords parameter specifies a condition for the auto-labeling policy rule that looks for words or phrases in recipient email addresses. You can specify multiple words or phrases separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 600.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-AnyOfRecipientAddressMatchesPatterns
The AnyOfRecipientAddressMatchesPatterns parameter specifies a condition for the auto-labeling policy rule that looks for text patterns in recipient email addresses by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Comment
The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ContentContainsSensitiveInformation
The ContentContainsSensitiveInformation parameter specifies a condition for the rule that's based on a sensitive information type match in content. The rule is applied to content that contains the specified sensitive information type.
This parameter uses the basic syntax @(@{Name="SensitiveInformationType1";[minCount="Value"],@{Name="SensitiveInformationType2";[minCount="Value"],...). For example, @(@{Name="U.S. Social Security Number (SSN)"; minCount="2"},@{Name="Credit Card Number"; minCount="1"; minConfidence="85"}).
| Type: | PswsHashtable[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ContentExtensionMatchesWords
The ContentExtensionMatchesWords parameter specifies a condition for the auto-labeling policy rule that looks for words in file name extensions. You can specify multiple words separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ContentPropertyContainsWords
The ContentPropertyContainsWords parameter specifies a condition for the auto-labeling policy rule that's based on a property match in content. The rule is applied to content that contains the specified property.
This parameter accepts values in the format: "Property1:Value1,Value2","Property2:Value3,Value4",..."PropertyN:ValueN,ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DefaultSpoDocLibraryHasLabel
{{ Fill DefaultSpoDocLibraryHasLabel Description }}
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Disabled
The Disabled parameter specifies whether the case hold rule is enabled or disabled. Valid values are:
- $true: The rule is disabled.
- $false: The rule is enabled. This is the default value.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DocumentCreatedBy
{{ Fill DocumentCreatedBy Description }}
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DocumentIsPasswordProtected
The DocumentIsPasswordProtected parameter specifies a condition for the auto-labeling policy rule that looks for password protected files (because the contents of the file can't be inspected). Password detection works for Office documents, compressed files (.zip, .7z, .rar, .tar, etc.), and .pdf files. Valid values are:
- $true: Look for password protected files.
- $false: Don't look for password protected files.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DocumentIsUnsupported
The DocumentIsUnsupported parameter specifies a condition for the auto-labeling policy rule that looks for files that can't be scanned. Valid values are:
- $true: Look for unsupported files that can't be scanned.
- $false: Don't look for unsupported files that can't be scanned.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DocumentNameMatchesWords
The DocumentNameMatchesWords parameter specifies a condition for the auto-labeling policy rule that looks for words or phrases in the name of message attachments. You can specify multiple words or phrases separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-DocumentSizeOver
The DocumentSizeOver parameter specifies a condition for the auto-labeling policy rule that looks for messages where any attachment is greater than the specified size.
When you enter a value, qualify the value with one of the following units:
- B (bytes)
- KB (kilobytes)
- MB (megabytes)
- GB (gigabytes)
- TB (terabytes)
Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
You can use this condition in auto-labeling policy rules that are scoped only to Exchange.
| Type: | Microsoft.Exchange.Data.ByteQuantifiedSize |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfAccessScope
The ExceptIfAccessScopeAccessScope parameter specifies an exception for the auto-labeling policy rule that's based on the access scope of the content. The rule isn't applied to content that matches the specified access scope. Valid values are:
- InOrganization: The rule isn't applied to content that's accessible inside the organization.
- NotInOrganization: The rule isn't applied to content that's accessible outside the organization.
- None: The exception isn't used.
| Type: | AccessScope |
| Accepted values: | InOrganization, NotInOrganization, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfAnyOfRecipientAddressContainsWords
The ExceptIfAnyOfRecipientAddressContainsWords parameter specifies an exception for the auto-labeling policy rule that looks for words or phrases in recipient email addresses. You can specify multiple words separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 600.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfAnyOfRecipientAddressMatchesPatterns
The ExceptIfAnyOfRecipientAddressMatchesPatterns parameter specifies an exception for the auto-labeling policy rule that looks for text patterns in recipient email addresses by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfContentContainsSensitiveInformation
The ExceptIfContentContainsSensitiveInformation parameter specifies an exception for the auto-labeling policy rule that's based on a sensitive information type match in content. The rule isn't applied to content that contains the specified sensitive information type.
This parameter uses the basic syntax @(@{Name="SensitiveInformationType1";[minCount="Value"],@{Name="SensitiveInformationType2";[minCount="Value"],...). For example, @(@{Name="U.S. Social Security Number (SSN)"; minCount="2"},@{Name="Credit Card Number"}).
| Type: | PswsHashtable[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfContentExtensionMatchesWords
The ExceptIfContentExtensionMatchesWords parameter specifies an exception for the auto-labeling policy rule that looks for words in file name extensions. You can specify multiple words separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfContentPropertyContainsWords
The ExceptIfContentPropertyContainsWords parameter specifies an exception for the auto-labeling policy rule that's based on a property match in content. The rule is not applied to content that contains the specified property.
This parameter accepts values in the format: "Property1:Value1,Value2","Property2:Value3,Value4",..."PropertyN:ValueN,ValueN".
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfDocumentCreatedBy
{{ Fill ExceptIfDocumentCreatedBy Description }}
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfDocumentIsPasswordProtected
The ExceptIfDocumentIsPasswordProtected parameter specifies an exception for the auto-labeling policy rule that looks for password protected files (because the contents of the file can't be inspected). Password detection works for Office documents, compressed files (.zip, .7z, .rar, .tar, etc.), and .pdf files. Valid values are:
- $true: Look for password protected files.
- $false: Don't look for password protected files.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfDocumentIsUnsupported
The ExceptIfDocumentIsUnsupported parameter specifies an exception for the auto-labeling policy rule that looks for files that can't be scanned. Valid values are:
- $true: Look for unsupported files that can't be scanned.
- $false: Don't look for unsupported files that can't be scanned.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfDocumentNameMatchesWords
The ExceptIfDocumentNameMatchesWords parameter specifies an exception for the auto-labeling policy rule that looks for words or phrases in the name of message attachments. You can specify multiple words or phrases separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfDocumentSizeOver
The ExceptIfDocumentSizeOver parameter specifies an exception for the auto-labeling policy rule that looks for messages where any attachment is greater than the specified size.
When you enter a value, qualify the value with one of the following units:
- B (bytes)
- KB (kilobytes)
- MB (megabytes)
- GB (gigabytes)
- TB (terabytes)
Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
You can use this exception in auto-labeling policy rules that are scoped only to Exchange.
| Type: | Microsoft.Exchange.Data.ByteQuantifiedSize |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfFrom
The ExceptIfFrom parameter specifies an exception for the auto-labeling policy rule that looks for messages from specific senders. You can use any value that uniquely identifies the sender. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfFromAddressContainsWords
The ExceptIfFromAddressContainsWords parameter specifies an exception for the auto-labeling policy rule that looks for words or phrases in the sender's email address. You can specify multiple words or phrases separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word length is 128 characters. The maximum number of words or phrases is 50.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfFromAddressMatchesPatterns
The ExceptIfFromAddressMatchesPatterns parameter specifies an exception for the auto-labeling policy rule that looks for text patterns in the sender's email address by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfFromMemberOf
The ExceptIfFromMemberOf parameter specifies an exception for the auto-labeling policy rule that looks for messages sent by group members. You identify the group members by their email addresses.
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
| Type: | SmtpAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfHeaderMatchesPatterns
The HeaderMatchesPatterns parameter specifies an exception for the auto-labeling policy rule that looks for text patterns in a header field by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | PswsHashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfProcessingLimitExceeded
The ExceptIfProcessingLimitExceeded parameter specifies an exception for the auto-labeling policy rule that looks for files where scanning couldn't complete. Valid values are:
- $true: Look for files where scanning couldn't complete.
- $false: Don't look for files where scanning couldn't complete.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfRecipientDomainIs
The ExceptIfRecipientDomainIs parameter specifies an exception for the auto-labeling policy rule that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfSenderDomainIs
The ExceptIfSenderDomainIs parameter specifies an exception for the auto-labeling policy rule that looks for messages from senders with email address in the specified domains. You can specify multiple values separated by commas.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfSenderIPRanges
The ExceptIfSenderIpRanges parameter specifies an exception for the auto-labeling policy rule that looks for senders whose IP addresses matches the specified value, or fall within the specified ranges. Valid values are:
- Single IP address: For example, 192.168.1.1.
- IP address range: For example, 192.168.0.1-192.168.0.254.
- Classless InterDomain Routing (CIDR) IP address range: For example, 192.168.0.1/25.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfSentTo
The ExceptIfSentTo parameter specifies an exception for the auto-labeling policy rule that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfSentToMemberOf
The ExceptIfSentToMemberOf parameter specifies an exception for the auto-labeling policy rule that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You identify the groups by email address. You can specify multiple values separated by commas.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExceptIfSubjectMatchesPatterns
The ExceptIfSubjectMatchesPatterns parameter specifies an exception for the auto-labeling policy rule that looks for text patterns in the Subject field of messages by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this exception in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ExpiryDate
This parameter is reserved for internal Microsoft use.
| Type: | System.DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-From
This parameter is reserved for internal Microsoft use.
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-FromAddressContainsWords
The FromAddressContainsWords parameter specifies a condition for the auto-labeling policy rule that looks for words or phrases in the sender's email address. You can specify multiple words or phrases separated by commas.
- Single word:
"no_reply" - Multiple words:
no_reply,urgent,... - Multiple words and phrases:
"phrase 1",word1,"phrase with , or spaces",word2,...
The maximum individual word length is 128 characters. The maximum number of words or phrases is 50.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-FromAddressMatchesPatterns
The FromAddressMatchesPatterns parameter specifies a condition for the auto-labeling policy rule that looks for text patterns in the sender's email address by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-FromMemberOf
This parameter is reserved for internal Microsoft use.
| Type: | SmtpAddress[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-HeaderMatchesPatterns
The HeaderMatchesPatterns parameter specifies a condition for the auto-labeling policy rule that looks for text patterns in a header field by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | PswsHashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Identity
The Identity parameter specifies the auto-labeling policy rule that you want to modify. You can use any value that uniquely identifies the rule. For example:
- Name
- Distinguished name (DN)
- GUID
| Type: | ComplianceRuleIdParameter |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Priority
This parameter is reserved for internal Microsoft use.
| Type: | System.Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ProcessingLimitExceeded
The ProcessingLimitExceeded parameter specifies a condition for the auto-labeling policy rule that looks for files where scanning couldn't complete. You can use this condition to create rules that work together to identify and process messages where the content couldn't be fully scanned. Valid values are:
- $true: Look for files where scanning couldn't complete.
- $false: Don't look for files where scanning couldn't complete.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RecipientDomainIs
The RecipientDomainIs parameter specifies a condition for the auto-labeling policy rule that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-ReportSeverityLevel
The ReportSeverityLevel parameter specifies the severity level of the incident report for content detections based on the rule. Valid values are:
- None: You can't select this value if the rule has no actions configured.
- Low: This is the default value.
- Medium
- High
| Type: | RuleSeverity |
| Accepted values: | Low, Medium, High, None, Informational, Information |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-RuleErrorAction
The RuleErrorAction parameter specifies what to do if an error is encountered during the evaluation of the rule. Valid values are:
- Ignore
- RetryThenBlock
- Blank (the value $null): This is the default value.
| Type: | PolicyRuleErrorAction |
| Accepted values: | Ignore, RetryThenBlock |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SenderDomainIs
The SenderDomainIs parameter specifies a condition for the auto-labeling policy rule that looks for messages from senders with email address in the specified domains. You can specify multiple values separated by commas.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SenderIPRanges
The SenderIpRanges parameter specifies a condition for the auto-sensitivity policy rule that looks for senders whose IP addresses matches the specified value, or fall within the specified ranges. Valid values are:
- Single IP address: For example, 192.168.1.1.
- IP address range: For example, 192.168.0.1-192.168.0.254.
- Classless InterDomain Routing (CIDR) IP address range: For example, 192.168.0.1/25.
You can specify multiple values separated by commas.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SentTo
The SentTo parameter specifies a condition for the auto-sensitivity policy rule that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
You can use this condition in auto-sensitivity policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SentToMemberOf
The SentToMemberOf parameter specifies a condition for the auto-labeling policy rule that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You identify the groups by email address. You can specify multiple values separated by commas.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | RecipientIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SourceType
{{ Fill SourceType Description }}
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-SubjectMatchesPatterns
The SubjectMatchesPatterns parameter specifies a condition for the auto-labeling policy rule that looks for text patterns in the Subject field of messages by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".
The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.
You can use this condition in auto-labeling policies that are scoped only to Exchange.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-WhatIf
The WhatIf switch doesn't work in Security & Compliance PowerShell.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |
-Workload
The Workload parameter specifies the workload. Valid values are:
- Exchange
- OneDriveForBusiness
- SharePoint
| Type: | Workload |
| Accepted values: | Exchange, SharePoint, OneDriveForBusiness |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Security & Compliance |