Remove-ADPermission
This cmdlet is available only in on-premises Exchange.
Use the Remove-ADPermission cmdlet to remove permissions from an Active Directory object.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Remove-ADPermission
[-Identity] <ADRawEntryIdParameter>
-User <SecurityPrincipalIdParameter>
[-AccessRights <ActiveDirectoryRights[]>]
[-ChildObjectTypes <ADSchemaObjectIdParameter[]>]
[-Confirm]
[-Deny]
[-DomainController <Fqdn>]
[-ExtendedRights <ExtendedRightIdParameter[]>]
[-InheritanceType <ActiveDirectorySecurityInheritance>]
[-InheritedObjectType <ADSchemaObjectIdParameter>]
[-Properties <ADSchemaObjectIdParameter[]>]
[-WhatIf]
[<CommonParameters>]Remove-ADPermission
[-Identity] <ADRawEntryIdParameter>
[-Confirm]
[-DomainController <Fqdn>]
[-WhatIf]
[<CommonParameters>]Remove-ADPermission
[[-Identity] <ADRawEntryIdParameter>]
-Instance <ADAcePresentationObject>
[-AccessRights <ActiveDirectoryRights[]>]
[-ChildObjectTypes <ADSchemaObjectIdParameter[]>]
[-Confirm]
[-Deny]
[-DomainController <Fqdn>]
[-ExtendedRights <ExtendedRightIdParameter[]>]
[-InheritanceType <ActiveDirectorySecurityInheritance>]
[-InheritedObjectType <ADSchemaObjectIdParameter>]
[-Properties <ADSchemaObjectIdParameter[]>]
[-User <SecurityPrincipalIdParameter>]
[-WhatIf]
[<CommonParameters>]Description
The ADPermission cmdlets can be used to directly modify Active Directory access control lists (ACLs). Although some Microsoft Exchange features may continue to use the ADPermission cmdlets to manage permissions (for example Send and Receive connectors), Exchange 2013 and later versions no longer use customized ACLs to manage administrative permissions. If you want to grant or deny administrative permissions in Exchange 2013 or later, you need to use Role Based Access Control (RBAC). For more information about RBAC, see Permissions in Exchange Server.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Remove-ADPermission -Identity Administrator -User Kim -ExtendedRights "Send As"This example removes the Send As permissions from user Kim on the user Administrator.
Example 2
Remove-ADPermission "IP Secured Inbound" -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights ms-Exch-SMTP-Submit,ms-Exch-SMTP-Accept-Any-Recipient,ms-Exch-Bypass-Anti-SpamThis example removes the ability for anonymous users to send messages through the Receive connector IP Secured Inbound.
Parameters
-AccessRights
The AccessRights parameter specifies the rights that you want to remove from the user on the Active Directory object. Valid values include:
- CreateChild
- DeleteChild
- ListChildren
- Self
- ReadProperty
- WriteProperty
- DeleteTree
- ListObject
- ExtendedRight
- Delete
- ReadControl
- GenericExecute
- GenericWrite
- GenericRead
- WriteDacl
- WriteOwner
- GenericAll
- Synchronize
- AccessSystemSecurity
You can specify multiple values separated by commas.
| Type: | ActiveDirectoryRights[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ChildObjectTypes
The ChildObjectTypes parameter specifies what type of object the permission should be removed from.
The ChildObjectTypes parameter can only be used if the AccessRights parameter is set to CreateChild or DeleteChild.
| Type: | ADSchemaObjectIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Deny
The Deny switch specifies that the permissions you're removing are Deny permissions. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DomainController
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ExtendedRights
The ExtendedRights parameter specifies the extended rights to remove.
| Type: | ExtendedRightIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Identity
The Identity parameter specifies the object from which the permission should be removed.
You can specify either the distinguished name (DN) of the object or the object's name if it's unique. If the DN or name contains spaces, enclose the name in quotation marks (").
| Type: | ADRawEntryIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-InheritanceType
The InheritanceType parameter specifies how permissions are inherited. Valid values are:
- None
- All (this is the default value)
- Children
- Descendents [sic]
- SelfAndChildren
| Type: | ActiveDirectorySecurityInheritance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-InheritedObjectType
The InheritedObjectType parameter specifies what kind of object inherits this access control entry (ACE).
| Type: | ADSchemaObjectIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Instance
The Instance parameter enables you to pass an entire object to the command to be processed. It's mainly used in scripts where an entire object must be passed to the command.
| Type: | ADAcePresentationObject |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Properties
The Properties parameter specifies what properties the object contains.
The Properties parameter can only be used if the AccessRights parameter is set to ReadProperty, WriteProperty, or Self.
| Type: | ADSchemaObjectIdParameter[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-User
The User parameter specifies whose permissions are being removed from the Active Directory object. You can specify the following types of users or groups:
- Mailbox users
- Mail users
- Security groups
For the best results, we recommend using the following values:
- UPN: For example,
user@contoso.com(users only). - Domain\SamAccountName: For example,
contoso\user.
Otherwise, you can use any value that uniquely identifies the user or group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
| Type: | SecurityPrincipalIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-WhatIf
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.