New-QuarantinePolicy
This cmdlet is available only in the cloud-based service.
Use the New-QuarantinePolicy cmdlet to create quarantine policies in your cloud-based organization.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
New-QuarantinePolicy
[-Name] <String>
[-AdminDisplayName <String>]
[-AdminNotificationFrequencyInDays <Int32>]
[-AdminNotificationLanguage <EsnLanguage>]
[-AdminNotificationsEnabled <Boolean>]
[-AdminQuarantinePermissionsList <MultiValuedProperty>]
[-CustomDisclaimer <String>]
[-DomainController <Fqdn>]
[-EndUserQuarantinePermissions <QuarantinePermissions>]
[-EndUserQuarantinePermissionsValue <Int32>]
[-EndUserSpamNotificationCustomFromAddress <String>]
[-EndUserSpamNotificationFrequency <TimeSpan>]
[-EndUserSpamNotificationFrequencyInDays <Int32>]
[-EndUserSpamNotificationLanguage <EsnLanguage>]
[-EsnCustomSubject <MultiValuedProperty>]
[-ESNEnabled <Boolean>]
[-IncludeMessagesFromBlockedSenderAddress <Boolean>]
[-MultiLanguageCustomDisclaimer <MultiValuedProperty>]
[-MultiLanguageSenderName <MultiValuedProperty>]
[-MultiLanguageSetting <MultiValuedProperty>]
[-OrganizationBrandingEnabled <Boolean>]
[-QuarantinePolicyType <QuarantinePolicyType>]
[-QuarantineRetentionDays <Int32>]
[<CommonParameters>] Description
Quarantine policies define what users are allowed to do to quarantined messages based on why the message was quarantined (for supported features) and quarantine notification settings. For more information, see Quarantine policies.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
New-QuarantinePolicy -Name ContosoTag -EndUserQuarantinePermissionsValue 0This example creates a new quarantine policy named ContosoTag with the same permissions as the No access preset permissions group.
To assign Limited access permissions, use the value 27. To assign Full access permissions, use the value 23.
Parameters
-AdminDisplayName
The AdminDisplayName parameter specifies a description for the quarantine policy. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-AdminNotificationFrequencyInDays
This parameter is reserved for internal Microsoft use.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-AdminNotificationLanguage
This parameter is reserved for internal Microsoft use.
| Type: | EsnLanguage |
| Accepted values: | Default, English, French, German, Italian, Japanese, Spanish, Korean, Portuguese, Russian, ChineseSimplified, ChineseTraditional, Amharic, Arabic, Bulgarian, BengaliIndia, Catalan, Czech, Cyrillic, Danish, Greek, Estonian, Basque, Persian, Finnish, Filipino, Galician, Gujarati, Hebrew, Hindi, Croatian, Hungarian, Indonesian, Icelandic, Kazakh, Kannada, Lithuanian, Latvian, Malayalam, Marathi, Malay, Dutch, NorwegianNynorsk, Norwegian, Odia, Polish, PortuguesePortugal, Romanian, Slovak, Slovenian, SerbianCyrillic, Serbian, Swedish, Swahili, Tamil, Telugu, Thai, Turkish, Ukrainian, Urdu, Vietnamese |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-AdminNotificationsEnabled
This parameter is reserved for internal Microsoft use.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-AdminQuarantinePermissionsList
This parameter is reserved for internal Microsoft use.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-CustomDisclaimer
This parameter is reserved for internal Microsoft use.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-DomainController
This parameter is reserved for internal Microsoft use.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserQuarantinePermissions
Note: To set permissions in quarantine policies, we recommend using the EndUserQuarantinePermissionsValue parameter.
The EndUserQuarantinePermissions specifies the end-user permissions for the quarantine policy by using a variable from the output of a New-QuarantinePermissions or Set-QuarantinePermissions command.
For example, run the following command to store the required permissions in a variable: $Perms = New-QuarantinePermissions <permissions>. In the same PowerShell session, use the value $Perms for this parameter.
| Type: | QuarantinePermissions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserQuarantinePermissionsValue
The EndUserQuarantinePermissionsValue parameter specifies the end-user permissions for the quarantine policy.
This parameter uses a decimal value that's converted from a binary value. The binary value corresponds to the list of available permissions in a specific order. For each permission, the value 1 equals True and the value 0 equals False. The required order is described in the following list from highest (1000000 or 128) to lowest (00000001 or 1):
- PermissionToViewHeader: The value 0 doesn't hide the View message header action in quarantine. If the message is visible in quarantine, the action is always available for the message.
- PermissionToDownload: This permission is not used (the value 0 or 1 does nothing).
- PermissionToAllowSender
- PermissionToBlockSender
- PermissionToRequestRelease: Don't set this permission and PermissionToRelease to the value 1. Set one value to 1 and the other value to 0, or set both values to 0.
- PermissionToRelease: Don't set this permission and PermissionToRequestRelease to value 1. Set one value to 1 and the other value to 0, or set both values to 0. This permission isn't honored for messages that were quarantined as malware or high confidence phishing. If the quarantine policy gives users this permission, users are allowed to request the release of their quarantined malware or high confidence phishing messages as if PermissionToRequestRelease was selected instead.
- PermissionToPreview
- PermissionToDelete
The values for the preset end-user permission groups are described in the following list:
- No access: Binary = 0000000, so use the decimal value 0.
- Limited access: Binary = 00101011, so use the decimal value 43.
- Full access: Binary = 00100111, so use the decimal value 39.
For custom permissions, get the binary value that corresponds to the permissions you want. Convert the binary value to a decimal value to use. Don't use the binary value for this parameter.
Note: If the value of this parameter is 0 (No access) and the value of the ESNEnabled parameter is $true, users can view their messages in quarantine, but the only available action for the messages is View message header.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserSpamNotificationCustomFromAddress
The EndUserSpamNotificationCustomFromAddress specifies the email address of an existing internal sender to use as the sender for quarantine notifications.
If you don't use this parameter, the default sender is quarantine@messaging.microsoft.com.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserSpamNotificationFrequency
The EndUserSpamNotificationFrequency parameter specifies how often quarantine notifications are sent to users. Valid values are:
- 04:00:00 (4 hours)
- 1.00:00:00 (1 day)
- 7.00:00:00 (7 days)
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserSpamNotificationFrequencyInDays
This parameter is reserved for internal Microsoft use.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EndUserSpamNotificationLanguage
This parameter is reserved for internal Microsoft use.
| Type: | EsnLanguage |
| Accepted values: | Default, English, French, German, Italian, Japanese, Spanish, Korean, Portuguese, Russian, ChineseSimplified, ChineseTraditional, Amharic, Arabic, Bulgarian, BengaliIndia, Catalan, Czech, Cyrillic, Danish, Greek, Estonian, Basque, Persian, Finnish, Filipino, Galician, Gujarati, Hebrew, Hindi, Croatian, Hungarian, Indonesian, Icelandic, Kazakh, Kannada, Lithuanian, Latvian, Malayalam, Marathi, Malay, Dutch, NorwegianNynorsk, Norwegian, Odia, Polish, PortuguesePortugal, Romanian, Slovak, Slovenian, SerbianCyrillic, Serbian, Swedish, Swahili, Tamil, Telugu, Thai, Turkish, Ukrainian, Urdu, Vietnamese |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-EsnCustomSubject
The EsnCustomSubject parameter specifies the text to use in the Subject field of quarantine notifications.
You can specify multiple values separated by commas using the syntax: ('value1',''value2',...'valueN'). For each language that you specify with the MultiLanguageSetting parameter, you need to specify unique Sender text. Be sure to align the corresponding MultiLanguageSetting, MultiLanguageCustomDisclaimer, EsnCustomSubject, and MultiLanguageSenderName parameter values in the same order.
To modify an existing value and preserve other values, you need to specify all existing values and the new value in the existing order.
This setting is available only in the built-in quarantine policy named DefaultGlobalTag that controls global quarantine policy settings. To access this quarantine policy, start your command with the following syntax: Get-QuarantinePolicy -QuarantinePolicyType GlobalQuarantinePolicy | Set-QuarantinePolicy ....
| Type: | MultiValuedProperty |
| Aliases: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ESNEnabled
The ESNEnabled parameter specifies whether to enable quarantine notifications (formerly known as end-user spam notifications) for the policy. Valid values are:
- $true: Quarantine notifications are enabled.
- $false: Quarantine notifications are disabled. User can only access quarantined messages in quarantine, not in email notifications. This is the default value.
Note: If the value of this parameter is $true and the value of the EndUserQuarantinePermissionsValue parameter is 0 (No access where all permissions are turned off), users can see their messages in quarantine, but the only available action for the messages is View message header.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-IncludeMessagesFromBlockedSenderAddress
The IncludeMessagesFromBlockedSenderAddress parameter specifies whether to send quarantine notifications for quarantined messages from blocked sender addresses. Valid values are:
- $true: Recipients get quarantine notifications for affected messages from blocked senders.
- $false: Recipients don't get quarantine notifications for affected messages from blocked senders. This is the default value.
| Type: | Boolean |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-MultiLanguageCustomDisclaimer
This parameter is reserved for internal Microsoft use.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-MultiLanguageSenderName
This parameter is reserved for internal Microsoft use.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-MultiLanguageSetting
This parameter is reserved for internal Microsoft use.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Name
The Name parameter specifies a unique name for the quarantine policy. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-OrganizationBrandingEnabled
This parameter is reserved for internal Microsoft use.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-QuarantinePolicyType
This parameter is reserved for internal Microsoft use.
| Type: | QuarantinePolicyType |
| Accepted values: | QuarantinePolicy, GlobalQuarantinePolicy |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-QuarantineRetentionDays
This parameter is reserved for internal Microsoft use.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |