Get-MoveRequestStatistics
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
Use the Get-MoveRequestStatistics cmdlet to view detailed information about move requests.
Some of the failure messages that are returned by this cmdlet are temporary and don't indicate that a request has actually failed. If the Status value is Queued or InProgress, then the request is proceeding normally.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-MoveRequestStatistics
[-Identity] <MoveRequestIdParameter>
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[<CommonParameters>] Get-MoveRequestStatistics
[-Identity] <MoveRequestIdParameter>
[-Analysis]
[-DiagnosticInfo <String>]
[-DiagnosticOnly]
[-IncludeReport]
[-ProxyToMailbox <MailboxIdParameter>]
[-ReportOnly]
[<CommonParameters>] Get-MoveRequestStatistics
-MoveRequestQueue <DatabaseIdParameter>
[-MailboxGuid <Guid>]
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[<CommonParameters>] Get-MoveRequestStatistics
-MRSInstance <Fqdn>
[-MailboxGuid <Guid>]
[-DomainController <Fqdn>]
[<CommonParameters>] Description
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MoveRequestStatistics -Identity Tony@contoso.comThis example returns the default statistics for Tony Smith's mailbox, which include the status, mailbox size, archive mailbox size, and the percentage complete.
Example 2
Get-MoveRequestStatistics -Identity "contoso\tony" | Format-ListThis example returns the detailed statistics for Tony Smith's mailbox by pipelining the results to the Format-List command.
Example 3
Get-MoveRequestStatistics -Identity Tony@contoso.com -IncludeReport | Export-CSV C:\MRStats.csvThis example returns additional information about the mailbox move for Tony Smith's mailbox and exports the report to a .csv file.
Example 4
Get-MoveRequestStatistics -MoveRequestQueue "MBXDB02"This example returns default statistics for all mailboxes whose move requests are in progress or haven't been cleared for the database MBXDB02.
Example 5
Get-MoveRequestStatistics -MRSInstance CAS01.contoso.com -MailboxGuid b6a6795c-a010-4f67-aaaa-da372d56fcb9In Exchange Server 2010, this example returns default statistics for a mailbox that has been moved by the instance of the Microsoft Exchange Mailbox Replication service running on the server CAS01.
Example 6
Get-MoveRequestStatistics tony@contoso.com -IncludeReport -DiagnosticInfo Verbose | Export-Clixml "C:\Data\MoveReport.xml"This example exports the move request information so you can later import it into the MRS_Explorer.ps1 script for analysis. For more information, see MRS-Explorer.
Parameters
-Analysis
This parameter is available only in the cloud-based service.
{{ Fill Analysis Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Diagnostic
This parameter is available only in on-premises Exchange.
The Diagnostic switch specifies whether to return extremely detailed information in the results. You don't need to specify a value with this switch.
Typically, you use this switch only at the request of Microsoft Customer Service and Support to troubleshoot problems.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiagnosticArgument
This parameter is available only in on-premises Exchange.
The DiagnosticArgument parameter modifies the results that are returned by using the Diagnostic switch. Typically, you use the Diagnostic switch and the DiagnosticArgument parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DiagnosticInfo
This parameter is available only in the cloud-based service.
Typically, you use the DiagnosticInfo parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems. Valid values are:
- ShowTimeline
- ShowTimeslot
- Verbose
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-DiagnosticOnly
This parameter is available only in the cloud-based service.
{{ Fill DiagnosticOnly Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-DomainController
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Identity
The Identity parameter specifies the identity of the mailbox or mail user. You can use one of the following values:
- GUID
- Distinguished name (DN)
- Domain\Account
- User principal name (UPN)
- Legacy Exchange DN
- SMTP address
- Alias
You can use this parameter with the MoveRequestQueue or MailboxGuid parameters.
| Type: | MoveRequestIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-IncludeReport
The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-MailboxGuid
This parameter is available only in on-premises Exchange.
The MailboxGuid parameter specifies the GUID of a mailbox for which you want to view the move request statistics.
You can't use this parameter with the Identity parameter.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MoveRequestQueue
This parameter is available only in on-premises Exchange.
This parameter is for debugging purposes only.
The MoveRequestQueue parameter specifies the mailbox database on which the move request resides. You can use any value that uniquely identifies the database. For example:
- Name
- Distinguished name (DN)
- GUID
You can't use this parameter with the Identity or MRSInstance parameters.
| Type: | DatabaseIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MRSInstance
This parameter is available only in Exchange Server 2010.
The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
You can't use this parameter with the Identity or MoveRequestQueue parameters.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010 |
-ProxyToMailbox
This parameter is available only in the cloud-based service.
The ProxyToMailbox parameter filters the results by the location of the specified mailbox (also known as proxying). You can use any value that uniquely identifies the mailbox. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
| Type: | MailboxIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ReportOnly
This parameter is reserved for internal Microsoft use.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019, Exchange Online |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.