Επεξεργασία

Κοινή χρήση μέσω

Troubleshooting Enterprise State Roaming settings in Microsoft Entra ID

  • Άρθρο

This article provides information on how to troubleshoot and diagnose issues with Enterprise State Roaming, and provides a list of known issues.

Note

We recommend that you use the Azure Az PowerShell module to interact with Azure. See Install Azure PowerShell to get started. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.

Note

This article applies to the Microsoft Edge Legacy HTML-based browser launched with Windows 10 in July 2015. The article does not apply to the new Microsoft Edge Chromium-based browser released on January 15, 2020. For more information on the Sync behavior for the new Microsoft Edge, see the article Microsoft Edge Sync.

Preliminary steps for troubleshooting

Before you start troubleshooting, verify that the user and device are configured properly, and that all the requirements of Enterprise State Roaming are met.

  1. Windows 10 or newer, with the latest updates, and a minimum Version 1511 (OS Build 10586 or later) is installed on the device.
  2. The device is Microsoft Entra joined or Microsoft Entra hybrid joined. For more information, see how to get a device under the control of Microsoft Entra ID.
  3. Ensure that Enterprise State Roaming is enabled for the tenant in Microsoft Entra ID as described in To enable Enterprise State Roaming. You can enable roaming for all users or for only a selected group of users.
  4. The user is assigned a Microsoft Entra ID P1 or P2 license.
  5. The device must be restarted and the user must sign in again to access Enterprise State Roaming features.

Troubleshooting and diagnosing issues

This section gives suggestions on how to troubleshoot and diagnose problems related to Enterprise State Roaming.

Verify sync, and the "Sync your settings" settings page

  1. After joining your Windows 10 or newer PC to a domain that is configured to allow Enterprise State Roaming, sign on with your work account. Go to Settings > Accounts > Sync Your Settings and confirm that sync and the individual settings are on, and that the top of the settings page indicates that you're syncing with your work account. Confirm the same account is also used as your account in Settings > Accounts > Your Info.

  2. Verify that sync works across multiple machines by making some changes on the original machine, such as moving the taskbar around the screen. Watch the change propagate to the second machine within five minutes.

    • Locking and unlocking the screen (Win + L) can help trigger a sync.
    • You must be signing in with the same account on both PCs for sync to work – as Enterprise State Roaming is tied to the user account and not the machine account.

Potential issue: If the controls in the Settings page aren't available, and you see the message "Some Windows features are only available if you're using a Microsoft account or work account." This issue might arise for devices that are set up to be domain-joined and registered to Microsoft Entra ID, but the device hasn't authenticated to Microsoft Entra ID yet. A possible cause is that the device policy must be applied, but this application happens asynchronously, and might take a few hours.

Verify the device registration status

Enterprise State Roaming requires the device to be registered with Microsoft Entra ID. Although not specific to Enterprise State Roaming, using the following instructions can help confirm that the Windows 10 or newer Client is registered, and confirm thumbprint, Microsoft Entra settings URL, NGC status, and other information.

  1. Open the command prompt unelevated. To do this in Windows, open the Run launcher (Win + R) and type "cmd" to open.
  2. Once the command prompt is open, type *dsregcmd.exe /status*.
  3. For expected output, the AzureAdJoined field value should be YES, WamDefaultSet field value should be YES, and the WamDefaultGUID field value should be a GUID with (AzureAD) at the end.

Potential issue: WamDefaultSet and AzureAdJoined both have "NO" in the field value, the device was domain-joined and registered with Microsoft Entra ID, and the device doesn't sync. If it's showing this, the device might need to wait for policy to be applied or the authentication for the device failed when connecting to Microsoft Entra ID. The user might have to wait a few hours for the policy to be applied. Other troubleshooting steps might include retrying autoregistration by signing out and back in, or launching the task in Task Scheduler. In some cases, running "dsregcmd.exe /leave" in an elevated command prompt window, rebooting, and trying registration again might help with this issue.

Potential issue: The field for SettingsUrl is empty and the device doesn't sync. The user might have last logged in to the device before Enterprise State Roaming was enabled. Restart the device and have the user sign-in. Optionally, in the portal, try having the IT Admin navigate to Identity > Devices > Overview > Enterprise State Roaming disable and re-enable Users may sync settings and app data across devices. Once re-enabled, restart the device and have the user sign-in. If this doesn't resolve the issue, SettingsUrl might be empty if there's a bad device certificate. In this case, running "dsregcmd.exe /leave" in an elevated command prompt window, rebooting, and trying registration again might help with this issue.

Enterprise State Roaming and multifactor authentication

Under certain conditions, Enterprise State Roaming can fail to sync data if Microsoft Entra multifactor authentication is configured. For more information on these symptoms, see the support document KB3193683.

Potential issue: If your device is configured to require multifactor authentication on the Microsoft Entra admin center, you might fail to sync settings while signing in to a Windows 10 or newer device using a password. This type of multifactor authentication configuration is intended to protect an Azure administrator account. Admin users might still be able to sync by signing in to their Windows 10 or newer devices with their Windows Hello for Business PIN or by completing multifactor authentication while accessing other Azure services like Microsoft 365.

Potential issue: Sync can fail if the admin configures the Active Directory Federation Services multifactor authentication Conditional Access policy and the access token on the device expires. Ensure that you sign in and sign out using the Windows Hello for Business PIN or complete multifactor authentication while accessing other Azure services like Microsoft 365.

Event Viewer

For advanced troubleshooting, Event Viewer can be used to find specific errors. The events can be found under Event Viewer > Applications and Services Logs > Microsoft > Windows > SettingSync-Azure and for identity-related issues with sync Applications and Services Logs > Microsoft > Windows > Microsoft Entra ID.

Next steps

For an overview, see enterprise state roaming overview.