Επεξεργασία

Κοινή χρήση μέσω

MSBuild reference for .NET SDK projects

  • Άρθρο

This page is a reference for the MSBuild properties and items that you can use to configure .NET projects.

Note

This page is a work in progress and does not list all of the useful MSBuild properties for the .NET SDK. For a list of common MSBuild properties, see Common MSBuild properties.

Assembly validation properties

These properties and items are passed to the ValidateAssemblies task. For more information about assembly validation, see Assembly validation.

The following MSBuild properties are documented in this section:

Note

These properties aren't part of the .NET SDK (yet). To use them, you must also add a PackageReference to Microsoft.DotNet.ApiCompat.Task.

In addition, the following properties that are documented in the Package validation properties also apply to assembly validation:

ApiCompatStrictMode

When set to true, the ApiCompatStrictMode property specifies that API compatibility checks should be performed in strict mode.

<PropertyGroup>
  <ApiCompatStrictMode>true</ApiCompatStrictMode>
</PropertyGroup>

ApiCompatValidateAssemblies

The ApiCompatValidateAssemblies property enables a series of validations on the specified assemblies. For more information, see Assembly validation.

<PropertyGroup>
  <ApiCompatValidateAssemblies>true</ApiCompatValidateAssemblies>
</PropertyGroup>

Assembly attribute properties

GenerateAssemblyInfo

The GenerateAssemblyInfo property controls AssemblyInfo attribute generation for the project. The default value is true. Use false to disable generation of the file:

<PropertyGroup>
  <GenerateAssemblyInfo>false</GenerateAssemblyInfo>
</PropertyGroup>

The GeneratedAssemblyInfoFile setting controls the name of the generated file.

When the GenerateAssemblyInfo value is true, package-related project properties are transformed into assembly attributes.

For more information about generating assembly attributes using a project file, see Set assembly attributes in a project file.

GeneratedAssemblyInfoFile

The GeneratedAssemblyInfoFile property defines the relative or absolute path of the generated assembly info file. Defaults to a file named [project-name].AssemblyInfo.[cs|vb] in the $(IntermediateOutputPath) (usually the obj) directory.

<PropertyGroup>
  <GeneratedAssemblyInfoFile>assemblyinfo.cs</GeneratedAssemblyInfoFile>
</PropertyGroup>

Framework properties

The following MSBuild properties are documented in this section:

TargetFramework

The TargetFramework property specifies the target framework version for the app. For a list of valid target framework monikers, see Target frameworks in SDK-style projects.

<PropertyGroup>
  <TargetFramework>net8.0</TargetFramework>
</PropertyGroup>

For more information, see Target frameworks in SDK-style projects.

TargetFrameworks

Use the TargetFrameworks property when you want your app to target multiple platforms. For a list of valid target framework monikers, see Target frameworks in SDK-style projects.

Note

This property is ignored if TargetFramework (singular) is specified.

<PropertyGroup>
  <TargetFrameworks>net8.0;net462</TargetFrameworks>
</PropertyGroup>

For more information, see Target frameworks in SDK-style projects.

NetStandardImplicitPackageVersion

Note

This property only applies to projects using netstandard1.x. It doesn't apply to projects that use netstandard2.x.

Use the NetStandardImplicitPackageVersion property when you want to specify a framework version that's lower than the metapackage version. The project file in the following example targets netstandard1.3 but uses the 1.6.0 version of NETStandard.Library.

<PropertyGroup>
  <TargetFramework>netstandard1.3</TargetFramework>
  <NetStandardImplicitPackageVersion>1.6.0</NetStandardImplicitPackageVersion>
</PropertyGroup>

Package properties

Descriptive properties

You can specify properties such as PackageId, PackageVersion, PackageIcon, Title, and Description to describe the package that gets created from your project. For information about these and other properties, see pack target.

<PropertyGroup>
  ...
  <PackageId>ClassLibDotNetStandard</PackageId>
  <Version>1.0.0</Version>
  <Authors>John Doe</Authors>
  <Company>Contoso</Company>
</PropertyGroup>

PackRelease

The PackRelease property is similar to the PublishRelease property, except that it changes the default behavior of dotnet pack. This property was introduced in .NET 7.

<PropertyGroup>
  <PackRelease>true</PackRelease>
</PropertyGroup>

Note

  • Starting in the .NET 8 SDK, PackRelease defaults to true. For more information, see 'dotnet pack' uses Release configuration.
  • .NET 7 SDK only: To use PackRelease in a project that's part of a Visual Studio solution, you must set the environment variable DOTNET_CLI_ENABLE_PACK_RELEASE_FOR_SOLUTIONS to true (or any other value). For solutions that have many projects, setting this variable increases the time required to pack.

Package validation properties

These properties and items are passed to the ValidatePackage task. For more information about package validation, see Package validation overview.

For properties for the ValidateAssemblies task, see Assembly validation properties.

The following MSBuild properties and items are documented in this section:

ApiCompatEnableRuleAttributesMustMatch

When set to true, the ApiCompatEnableRuleAttributesMustMatch property enables the validation rule that checks if attributes match. The default is false.

<PropertyGroup>
  <ApiCompatEnableRuleAttributesMustMatch>true</ApiCompatEnableRuleAttributesMustMatch>
</PropertyGroup>

ApiCompatEnableRuleCannotChangeParameterName

When set to true, the ApiCompatEnableRuleCannotChangeParameterName property enables the validation rule that checks whether parameter names have changed in public methods. The default is false.

<PropertyGroup>
  <ApiCompatEnableRuleCannotChangeParameterName>true</ApiCompatEnableRuleCannotChangeParameterName>
</PropertyGroup>

ApiCompatExcludeAttributesFile

The ApiCompatExcludeAttributesFile item specifies the path to a file that contains attributes to exclude in DocId format.

<ItemGroup>
  <ApiCompatExcludeAttributesFile Include="ApiCompatExcludedAttributes.txt" />
  <ApiCompatExcludeAttributesFile Include="ApiCompatBaselineExcludedAttributes.txt" />
</ItemGroup>

ApiCompatGenerateSuppressionFile

The ApiCompatGenerateSuppressionFile property specifies whether to generate a compatibility suppression file.

<PropertyGroup>
  <ApiCompatGenerateSuppressionFile>true</ApiCompatGenerateSuppressionFile>
</PropertyGroup>

ApiCompatPermitUnnecessarySuppressions

The ApiCompatPermitUnnecessarySuppressions property specifies whether to permit unnecessary suppressions in the suppression file.

The default is false.

<PropertyGroup>
  <ApiCompatPermitUnnecessarySuppressions>true</ApiCompatPermitUnnecessarySuppressions>
</PropertyGroup>

ApiCompatPreserveUnnecessarySuppressions

The ApiCompatPreserveUnnecessarySuppressions property specifies whether to preserve unnecessary suppressions when regenerating the suppression file. When an existing suppression file is regenerated, its content is read, deserialized into a set of suppressions, and then stored in a list. Some of the suppressions might no longer be necessary if the incompatibility has been fixed. When the suppressions are serialized back to disk, you can choose to keep all the existing (deserialized) expressions by setting this property to true.

The default is false.

<PropertyGroup>
  <ApiCompatPreserveUnnecessarySuppressions>true</ApiCompatPreserveUnnecessarySuppressions>
</PropertyGroup>

ApiCompatRespectInternals

The ApiCompatRespectInternals property specifies whether internal APIs should be checked for compatibility in addition to public APIs.

<PropertyGroup>
  <ApiCompatRespectInternals>true</ApiCompatRespectInternals>
</PropertyGroup>

ApiCompatSuppressionFile

The ApiCompatSuppressionFile item specifies the path to one or more suppression files to read from. If unspecified, the suppression file <project-directory>/CompatibilitySuppressions.xml is read (if it exists).

<ItemGroup>
  <ApiCompatSuppressionFile Include="CompatibilitySuppressions.xml;CompatibilitySuppressions.WasmThreads.xml" />
</ItemGroup>

ApiCompatSuppressionOutputFile

The ApiCompatSuppressionOutputFile property specifies the path to a suppression file to write to when <ApiCompatGenerateSuppressionFile> is true. If unspecified, the first ApiCompatSuppressionFile item is used.

EnablePackageValidation

The EnablePackageValidation property enables a series of validations on the package after the Pack task. For more information, see package validation.

<PropertyGroup>
  <EnablePackageValidation>true</EnablePackageValidation>
</PropertyGroup>

EnableStrictModeForBaselineValidation

When set to true, the EnableStrictModeForBaselineValidation property enables strict mode for package baseline checks. The default is false.

EnableStrictModeForCompatibleFrameworksInPackage

When set to true, the EnableStrictModeForCompatibleFrameworksInPackage property enables strict mode for assemblies that are compatible based on their target framework. The default is false.

EnableStrictModeForCompatibleTfms

When set to true, the EnableStrictModeForCompatibleTfms property enables strict mode for contract and implementation assemblies for all compatible target frameworks. The default is true.

NoWarn

The NoWarn property specifies the diagnostic IDs to suppress.

<PropertyGroup>
  <NoWarn>$(NoWarn);PKV0001</NoWarn>
</PropertyGroup>

PackageValidationBaselineFrameworkToIgnore

The PackageValidationBaselineFrameworkToIgnore item specifies a target framework to ignore from the baseline package. The framework string must exactly match the folder name in the baseline package.

<ItemGroup>
  <PackageValidationBaselineFrameworkToIgnore Include="netcoreapp2.1" />
</ItemGroup>

PackageValidationBaselineName

The PackageValidationBaselineName property specifies the name of the baseline package to validate the current package against. If unspecified, the PackageId value is used.

PackageValidationBaselineVersion

The PackageValidationBaselineVersion property specifies the version of the baseline package to validate the current package against.

PackageValidationReferencePath

The PackageValidationReferencePath item specifies the directory path where the reference assembly can be found per TFM.

<ItemGroup>
  <PackageValidationReferencePath Include="path/to/reference-assembly" TargetFramework="net7.0" />
</ItemGroup>

RoslynAssembliesPath

The RoslynAssembliesPath property specifies the path to the directory that contains the Microsoft.CodeAnalysis assemblies you want to use. You only need to set this property if you want to test with a newer compiler than what's in the SDK.

The following MSBuild properties are documented in this section:

AppendTargetFrameworkToOutputPath

The AppendTargetFrameworkToOutputPath property controls whether the target framework moniker (TFM) is appended to the output path (which is defined by OutputPath). The .NET SDK automatically appends the target framework and, if present, the runtime identifier to the output path. Setting AppendTargetFrameworkToOutputPath to false prevents the TFM from being appended to the output path. However, without the TFM in the output path, multiple build artifacts may overwrite each other.

For example, for a .NET 5 app, the output path changes from bin\Debug\net5.0 to bin\Debug with the following setting:

<PropertyGroup>
  <AppendTargetFrameworkToOutputPath>false</AppendTargetFrameworkToOutputPath>
</PropertyGroup>

AppendRuntimeIdentifierToOutputPath

The AppendRuntimeIdentifierToOutputPath property controls whether the runtime identifier (RID) is appended to the output path. The .NET SDK automatically appends the target framework and, if present, the runtime identifier to the output path. Setting AppendRuntimeIdentifierToOutputPath to false prevents the RID from being appended to the output path.

For example, for a .NET 5 app and an RID of win-x64, the following setting changes the output path from bin\Debug\net5.0\win-x64 to bin\Debug\net5.0:

<PropertyGroup>
  <AppendRuntimeIdentifierToOutputPath>false</AppendRuntimeIdentifierToOutputPath>
</PropertyGroup>

CopyLocalLockFileAssemblies

The CopyLocalLockFileAssemblies property is useful for plugin projects that have dependencies on other libraries. If you set this property to true, any transitive NuGet package dependencies are copied to the output directory. That means you can use the output of dotnet build to run your plugin on any machine.

<PropertyGroup>
  <CopyLocalLockFileAssemblies>true</CopyLocalLockFileAssemblies>
</PropertyGroup>

The default value of CopyLocalLockFileAssemblies can vary based on the output type. For example, for class libraries the default value is false, while for console applications the default is true. You can specify this property explicitly to override the default if needed.

Tip

Alternatively, you can use dotnet publish to publish the class library. For more information, see dotnet publish.

ErrorOnDuplicatePublishOutputFiles

The ErrorOnDuplicatePublishOutputFiles property relates to whether the SDK generates error NETSDK1148 when MSBuild detects duplicate files in the publish output, but can't determine which files to remove. Set the ErrorOnDuplicatePublishOutputFiles property to false if you don't want the error to be generated.

<PropertyGroup>
  <ErrorOnDuplicatePublishOutputFiles>false</ErrorOnDuplicatePublishOutputFiles>
</PropertyGroup>

This property was introduced in .NET 6.

GenerateRuntimeConfigDevFile

Starting with the .NET 6 SDK, the [Appname].runtimesettings.dev.json file is no longer generated by default at compile time. If you still want this file to be generated, set the GenerateRuntimeConfigDevFile property to true.

<PropertyGroup>
  <GenerateRuntimeConfigDevFile>true</GenerateRuntimeConfigDevFile>
</PropertyGroup>

GenerateRuntimeConfigurationFiles

The GenerateRuntimeConfigurationFiles property controls whether runtime configuration options are copied from the runtimeconfig.template.json file to the [appname].runtimeconfig.json file. For apps that require a runtimeconfig.json file, that is, those whose OutputType is Exe, this property defaults to true.

<PropertyGroup>
  <GenerateRuntimeConfigurationFiles>true</GenerateRuntimeConfigurationFiles>
</PropertyGroup>

GenerateSatelliteAssembliesForCore

The GenerateSatelliteAssembliesForCore property controls whether satellite assemblies are generated using csc.exe or Al.exe (Assembly Linker) in .NET Framework projects. (.NET Core and .NET 5+ projects always use csc.exe to generate satellite assemblies.) For .NET Framework projects, satellite assemblies are created by al.exe, by default. By setting the GenerateSatelliteAssembliesForCore property to true, satellite assemblies are created by csc.exe instead. Using csc.exe can be advantageous in the following situations:

<PropertyGroup>
  <GenerateSatelliteAssembliesForCore>true</GenerateSatelliteAssembliesForCore>
</PropertyGroup>

IsPublishable

The IsPublishable property allows the Publish target to run. This property only affects processes that use .*proj files and the Publish target, such as the dotnet publish command. It does not affect publishing in Visual Studio, which uses the PublishOnly target. The default value is true.

This property is useful if you run dotnet publish on a solution file, as it allows automatic selection of projects that should be published.

<PropertyGroup>
  <IsPublishable>false</IsPublishable>
</PropertyGroup>

PreserveCompilationContext

The PreserveCompilationContext property allows a built or published application to compile more code at run time using the same settings that were used at build time. The assemblies referenced at build time will be copied into the ref subdirectory of the output directory. The names of the reference assemblies are stored in the application's .deps.json file along with the options passed to the compiler. You can retrieve this information using the DependencyContext.CompileLibraries and DependencyContext.CompilationOptions properties.

This functionality is mostly used internally by ASP.NET Core MVC and Razor pages to support run-time compilation of Razor files.

<PropertyGroup>
  <PreserveCompilationContext>true</PreserveCompilationContext>
</PropertyGroup>

PreserveCompilationReferences

The PreserveCompilationReferences property is similar to the PreserveCompilationContext property, except that it only copies the referenced assemblies to the publish directory, and not the .deps.json file.

<PropertyGroup>
  <PreserveCompilationReferences>true</PreserveCompilationReferences>
</PropertyGroup>

For more information, see Razor SDK properties.

ProduceReferenceAssemblyInOutDir

In .NET 5 and earlier versions, reference assemblies are always written to the OutDir directory. In .NET 6 and later versions, you can use the ProduceReferenceAssemblyInOutDir property to control whether reference assemblies are written to the OutDir directory. The default value is false, and reference assemblies are only written to the IntermediateOutputPath directory. Set the value to true to write reference assemblies to the OutDir directory.

<PropertyGroup>
  <ProduceReferenceAssemblyInOutDir>true</ProduceReferenceAssemblyInOutDir>
</PropertyGroup>

For more information, see Write reference assemblies to intermediate output.

PublishDocumentationFile

When this property is true, the XML documentation file for the project, if one is generated, is included in the publish output for the project. This property defaults to true.

Tip

Set GenerateDocumentationFile to true to generate an XML documentation file at compile time.

PublishDocumentationFiles

This property is an enablement flag for several other properties that control whether various kinds of XML documentation files are copied to the publish directory by default, namely PublishDocumentationFile and PublishReferencesDocumentationFiles. If those properties are unset, and this property is set, then those properties will default to true. This property defaults to true.

PublishReferencesDocumentationFiles

When this property is true, XML documentation files for the project's references are copied to the publish directory, instead of just run-time assets like DLL files. This property defaults to true.

PublishRelease

The PublishRelease property informs dotnet publish to use the Release configuration by default instead of the Debug configuration. This property was introduced in .NET 7.

<PropertyGroup>
  <PublishRelease>true</PublishRelease>
</PropertyGroup>

Note

  • Starting in the .NET 8 SDK, PublishRelease defaults to true for projects that target .NET 8 or later. For more information, see 'dotnet publish' uses Release configuration.
  • This property does not affect the behavior of dotnet build /t:Publish, and it only changes the configuration only when publishing via the .NET CLI.
  • .NET 7 SDK only: To use PublishRelease in a project that's part of a Visual Studio solution, you must set the environment variable DOTNET_CLI_ENABLE_PUBLISH_RELEASE_FOR_SOLUTIONS to true (or any other value). When publishing a solution with this variable enabled, the executable project's PublishRelease value takes precedence and flows the new default configuration to any other projects in the solution. If a solution contains multiple executable or top-level projects with differing values of PublishRelease, the solution won't successfully publish. For solutions that have many projects, use of this setting increases the time required to publish.

PublishSelfContained

The PublishSelfContained property informs dotnet publish to publish an app as a self-contained app. This property is useful when you can't use the --self-contained argument for the dotnet publish command—for example, when you're publishing at the solution level. In that case, you can add the PublishSelfContained MSBuild property to a project or Directory.Build.Props file.

This property was introduced in .NET 7. It's similar to the SelfContained property, except that it's specific to the publish verb. It's recommended to use PublishSelfContained instead of SelfContained.

<PropertyGroup>
  <PublishSelfContained>true</PublishSelfContained>
</PropertyGroup>

RollForward

The RollForward property controls how the application chooses a runtime when multiple runtime versions are available. This value is output to the .runtimeconfig.json as the rollForward setting.

<PropertyGroup>
  <RollForward>LatestMinor</RollForward>
</PropertyGroup>

Set RollForward to one of the following values:

Value Description
Minor Default if not specified.
Roll-forward to the lowest higher minor version, if requested minor version is missing. If the requested minor version is present, then the LatestPatch policy is used.
Major Roll-forward to the next available higher major version, and lowest minor version, if requested major version is missing. If the requested major version is present, then the Minor policy is used.
LatestPatch Roll-forward to the highest patch version. This value disables minor version roll-forward.
LatestMinor Roll-forward to highest minor version, even if requested minor version is present.
LatestMajor Roll-forward to highest major and highest minor version, even if requested major is present.
Disable Don't roll-forward, only bind to the specified version. This policy isn't recommended for general use since it disables the ability to roll-forward to the latest patches. This value is only recommended for testing.

For more information, see Control roll-forward behavior.

RuntimeFrameworkVersion

The RuntimeFrameworkVersion property specifies the version of the runtime to use when publishing. Specify a runtime version:

<PropertyGroup>
  <RuntimeFrameworkVersion>5.0.7</RuntimeFrameworkVersion>
</PropertyGroup>

When publishing a framework-dependent application, this value specifies the minimum version required. When publishing a self-contained application, this value specifies the exact version required.

RuntimeIdentifier

The RuntimeIdentifier property lets you specify a single runtime identifier (RID) for the project. The RID enables publishing a self-contained deployment.

<PropertyGroup>
  <RuntimeIdentifier>linux-x64</RuntimeIdentifier>
</PropertyGroup>

RuntimeIdentifiers

The RuntimeIdentifiers property lets you specify a semicolon-delimited list of runtime identifiers (RIDs) for the project. Use this property if you need to publish for multiple runtimes. RuntimeIdentifiers is used at restore time to ensure the right assets are in the graph.

Tip

RuntimeIdentifier (singular) can provide faster builds when only a single runtime is required.

<PropertyGroup>
  <RuntimeIdentifiers>win-x64;osx-x64;linux-x64</RuntimeIdentifiers>
</PropertyGroup>

SatelliteResourceLanguages

The SatelliteResourceLanguages property lets you specify which languages you want to preserve satellite resource assemblies for during build and publish. Many NuGet packages include localized resource satellite assemblies in the main package. For projects that reference these NuGet packages that don't require localized resources, the localized assemblies can unnecessarily inflate the build and publish output size. By adding the SatelliteResourceLanguages property to your project file, only localized assemblies for the languages you specify will be included in the build and publish output. For example, in the following project file, only English (US) and German (Germany) resource satellite assemblies will be retained.

<PropertyGroup>
  <SatelliteResourceLanguages>en-US;de-DE</SatelliteResourceLanguages>
</PropertyGroup>

Note

  • You must specify this property in the project that references the NuGet package with localized resource satellite assemblies.

  • To specify multiple languages as an argument to dotnet publish, you must add three pairs of quotation marks around the language identifiers. For example:

    dotnet msbuild multi.msbuildproj -p:SatelliteResourceLanguages="""de;en"""

SelfContained

The SelfContained property informs dotnet build and dotnet publish to build or publish an app as a self-contained app. This property is useful when you can't use the --self-contained argument with the dotnet command—for example, when you're publishing at the solution level. In that case, you can add the SelfContained MSBuild property to a project or Directory.Build.Props file.

This property is similar to the PublishSelfContained property. It's recommended to use PublishSelfContained instead of SelfContained when possible.

<PropertyGroup>
  <SelfContained>true</SelfContained>
</PropertyGroup>

UseAppHost

The UseAppHost property controls whether or not a native executable is created for a deployment. A native executable is required for self-contained deployments. A framework-dependent executable is created by default. Set the UseAppHost property to false to disable generation of the executable.

<PropertyGroup>
  <UseAppHost>false</UseAppHost>
</PropertyGroup>

For more information about deployment, see .NET application deployment.

Numerous MSBuild properties are available to fine tune trimming, which is a feature that trims unused code from self-contained deployments. These options are discussed in detail at Trimming options. The following table provides a quick reference.

Property Values Description
PublishTrimmed true or false Controls whether trimming is enabled during publish.
TrimMode full or partial Default is full. Controls the trimming granularity.
SuppressTrimAnalysisWarnings true or false Controls whether trim analysis warnings are produced.
EnableTrimAnalyzer true or false Controls whether a subset of trim analysis warnings are produced. You can enable analysis even if PublishTrimmed is set to false.
ILLinkTreatWarningsAsErrors true or false Controls whether trim warnings are treated as errors. For example, you may want to set this property to false when TreatWarningsAsErrors is set to true.
TrimmerSingleWarn true or false Controls whether a single warning per assembly is shown or all warnings.
TrimmerRemoveSymbols true or false Controls whether all symbols are removed from a trimmed application.

The following MSBuild properties are documented in this section:

C# compiler options, such as LangVersion and Nullable, can also be specified as MSBuild properties in your project file. For more information, see C# compiler options.

ContinuousIntegrationBuild

The ContinuousIntegrationBuild property indicates whether a build is executing on a continuous integration (CI) server. When set to true, this property enables settings that only apply to official builds as opposed to local builds on a developer machine. For example, stored file paths are normalized for official builds. But on a local development machine, the debugger isn't able to find local source files if file paths are normalized.

Note

Currently, setting this property to true works only if you add either a specific SourceLink provider package reference or a <SourceRoot Include="$(MyDirectory)" /> item. For more information, see dotnet/roslyn issue 55860.

You can use your CI system's variable to conditionally set the ContinuousIntegrationBuild property. For example, the variable name for Azure Pipelines is TF_BUILD:

<PropertyGroup Condition="'$(TF_BUILD)' == 'true'">
  <ContinuousIntegrationBuild>true</ContinuousIntegrationBuild>
</PropertyGroup>

For GitHub Actions, the variable name is GITHUB_ACTIONS:

<PropertyGroup Condition="'$(GITHUB_ACTIONS)' == 'true'">
  <ContinuousIntegrationBuild>true</ContinuousIntegrationBuild>
</PropertyGroup>

CopyDebugSymbolFilesFromPackages

When this property is set to true, all symbol files (also known as PDB files) from PackageReference items in the project are copied to the build output. These files can provide more informative stack traces for exceptions and make memory dumps and traces of the running application easier to understand. However, including these files results in an increased deployment bundle size.

This property was introduced in .NET SDK 7.0.100, though it defaults to not being specified.

CopyDocumentationFilesFromPackages

When this property is set to true, all generated XML documentation files from PackageReference items in the project are copied to the build output. Note that enabling this feature will result in increased deployment bundle size.

This property was introduced in .NET SDK 7.0.100, though it defaults to not being specified.

DisableImplicitFrameworkDefines

The DisableImplicitFrameworkDefines property controls whether or not the SDK generates preprocessor symbols for the target framework and platform for the .NET project. When this property is set to false or is unset (which is the default value) preprocessor symbols are generated for:

  • Framework without version (NETFRAMEWORK, NETSTANDARD, NET)
  • Framework with version (NET48, NETSTANDARD2_0, NET6_0)
  • Framework with version minimum bound (NET48_OR_GREATER, NETSTANDARD2_0_OR_GREATER, NET6_0_OR_GREATER)

For more information on target framework monikers and these implicit preprocessor symbols, see Target frameworks.

Additionally, if you specify an operating system-specific target framework in the project (for example net6.0-android), the following preprocessor symbols are generated:

  • Platform without version (ANDROID, IOS, WINDOWS)
  • Platform with version (IOS15_1)
  • Platform with version minimum bound (IOS15_1_OR_GREATER)

For more information on operating system-specific target framework monikers, see OS-specific TFMs.

Finally, if your target framework implies support for older target frameworks, preprocessor symbols for those older frameworks are emitted. For example, net6.0 implies support for net5.0 and so on all the way back to .netcoreapp1.0. So for each of these target frameworks, the Framework with version minimum bound symbol will be defined.

DocumentationFile

The DocumentationFile property lets you specify a file name for the XML file that contains the documentation for your library. For IntelliSense to function correctly with your documentation, the file name must be the same as the assembly name and must be in the same directory as the assembly. If you don't specify this property but you do set GenerateDocumentationFile to true, the name of the documentation file defaults to the name of your assembly but with an .xml file extension. For this reason, it's often easier to omit this property and use the GenerateDocumentationFile property instead.

If you specify this property but you set GenerateDocumentationFile to false, the compiler does not generate a documentation file. If you specify this property and omit the GenerateDocumentationFile property, the compiler does generate a documentation file.

<PropertyGroup>
  <DocumentationFile>path/to/file.xml</DocumentationFile>
</PropertyGroup>

EmbeddedResourceUseDependentUponConvention

The EmbeddedResourceUseDependentUponConvention property defines whether resource manifest file names are generated from type information in source files that are co-located with resource files. For example, if Form1.resx is in the same folder as Form1.cs, and EmbeddedResourceUseDependentUponConvention is set to true, the generated .resources file takes its name from the first type that's defined in Form1.cs. If MyNamespace.Form1 is the first type defined in Form1.cs, the generated file name is MyNamespace.Form1.resources.

Note

If LogicalName, ManifestResourceName, or DependentUpon metadata is specified for an EmbeddedResource item, the generated manifest file name for that resource file is based on that metadata instead.

By default, in a new .NET project that targets .NET Core 3.0 or a later version, this property is set to true. If set to false, and no LogicalName, ManifestResourceName, or DependentUpon metadata is specified for the EmbeddedResource item in the project file, the resource manifest file name is based off the root namespace for the project and the relative file path to the .resx file. For more information, see How resource manifest files are named.

<PropertyGroup>
  <EmbeddedResourceUseDependentUponConvention>true</EmbeddedResourceUseDependentUponConvention>
</PropertyGroup>

EnablePreviewFeatures

The EnablePreviewFeatures property defines whether your project depends on any APIs or assemblies that are decorated with the RequiresPreviewFeaturesAttribute attribute. This attribute is used to signify that an API or assembly uses features that are considered to be in preview for the SDK version you're using. Preview features are not supported and may be removed in a future version. To enable the use of preview features, set the property to True.

<PropertyGroup>
  <EnablePreviewFeatures>True</EnablePreviewFeatures>
</PropertyGroup>

When a project contains this property set to True, the following assembly-level attribute is added to the AssemblyInfo.cs file:

[assembly: RequiresPreviewFeatures]

An analyzer warns if this attribute is present on dependencies for projects where EnablePreviewFeatures is not set to True.

Library authors who intend to ship preview assemblies should set this property to True. If an assembly needs to ship with a mixture of preview and non-preview APIs, see the GenerateRequiresPreviewFeaturesAttribute section below.

EnableWindowsTargeting

Set the EnableWindowsTargeting property to true to build Windows apps (for example, Windows Forms or Windows Presentation Foundation apps) on a non-Windows platform. If you don't set this property to true, you'll get build warning NETSDK1100. This error occurs because targeting and runtime packs aren't automatically downloaded on platforms that aren't supported. By setting this property, those packs are downloaded when cross-targeting.

Note

This property is currently recommended to allow development on non-Windows platforms. But when the application is ready to be released, it should be built on Windows. When building on a non-Windows platform, the output may not be the same as when building on Windows. In particular, the executable is not marked as a Windows application (which means that it will always launch a console window) and won't have an icon embedded.

<PropertyGroup>
  <EnableWindowsTargeting>true</EnableWindowsTargeting>
</PropertyGroup>

GenerateDocumentationFile

The GenerateDocumentationFile property controls whether the compiler generates an XML documentation file for your library. If you set this property to true and you don't specify a file name via the DocumentationFile property, the generated XML file is placed in the same output directory as your assembly and has the same file name (but with an .xml extension).

<PropertyGroup>
  <GenerateDocumentationFile>true</GenerateDocumentationFile>
</PropertyGroup>

For more information about generating documentation from code comments, see XML documentation comments (C#), Document your code with XML (Visual Basic), or Document your code with XML (F#).

GenerateRequiresPreviewFeaturesAttribute

The GenerateRequiresPreviewFeaturesAttribute property is closely related to the EnablePreviewFeatures property. If your library uses preview features but you don't want the entire assembly to be marked with the RequiresPreviewFeaturesAttribute attribute, which would require any consumers to enable preview features, set this property to False.

<PropertyGroup>
    <EnablePreviewFeatures>True</EnablePreviewFeatures>
    <GenerateRequiresPreviewFeaturesAttribute>False</GenerateRequiresPreviewFeaturesAttribute>
</PropertyGroup>

Important

If you set the GenerateRequiresPreviewFeaturesAttribute property to False, you must be certain to decorate all public APIs that rely on preview features with RequiresPreviewFeaturesAttribute.

OptimizeImplicitlyTriggeredBuild

To speed up the build time, builds that are implicitly triggered by Visual Studio skip code analysis, including nullable analysis. Visual Studio triggers an implicit build when you run tests, for example. However, implicit builds are optimized only when TreatWarningsAsErrors is not true. If you have TreatWarningsAsErrors set to true but you still want implicitly triggered builds to be optimized, you can set OptimizeImplicitlyTriggeredBuild to True. To turn off build optimization for implicitly triggered builds, set OptimizeImplicitlyTriggeredBuild to False.

<PropertyGroup>
    <OptimizeImplicitlyTriggeredBuild>True</OptimizeImplicitlyTriggeredBuild>
</PropertyGroup>

DisableRuntimeMarshalling

The DisableRuntimeMarshalling property enables you to specify that you would like to disable runtime marshalling support for your project. If this property is set to true, then the DisableRuntimeMarshallingAttribute is added to the assembly and any P/Invokes or delegate-based interop will follow the rules for disabled runtime marshalling.

<PropertyGroup>
    <DisableRuntimeMarshalling>True</DisableRuntimeMarshalling>
</PropertyGroup>

Default item inclusion properties

The following MSBuild properties are documented in this section:

For more information, see Default includes and excludes.

DefaultItemExcludes

Use the DefaultItemExcludes property to define glob patterns for files and folders that should be excluded from the include, exclude, and remove globs. By default, the ./bin and ./obj folders are excluded from the glob patterns.

<PropertyGroup>
  <DefaultItemExcludes>$(DefaultItemExcludes);**/*.myextension</DefaultItemExcludes>
</PropertyGroup>

DefaultItemExcludesInProjectFolder

Use the DefaultItemExcludesInProjectFolder property to define glob patterns for files and folders in the project folder that should be excluded from the include, exclude, and remove globs. By default, folders that start with a period (.), such as .git and .vs, are excluded from the glob patterns.

This property is very similar to the DefaultItemExcludes property, except that it only considers files and folders in the project folder. When a glob pattern would unintentionally match items outside the project folder with a relative path, use the DefaultItemExcludesInProjectFolder property instead of the DefaultItemExcludes property.

<PropertyGroup>
  <DefaultItemExcludesInProjectFolder>$(DefaultItemExcludesInProjectFolder);**/myprefix*/**</DefaultItemExcludesInProjectFolder>
</PropertyGroup>

EnableDefaultItems

The EnableDefaultItems property controls whether compile items, embedded resource items, and None items are implicitly included in the project. The default value is true. Set the EnableDefaultItems property to false to disable all implicit file inclusion.

<PropertyGroup>
  <EnableDefaultItems>false</EnableDefaultItems>
</PropertyGroup>

EnableDefaultCompileItems

The EnableDefaultCompileItems property controls whether compile items are implicitly included in the project. The default value is true. Set the EnableDefaultCompileItems property to false to disable implicit inclusion of *.cs and other language-extension files.

<PropertyGroup>
  <EnableDefaultCompileItems>false</EnableDefaultCompileItems>
</PropertyGroup>

EnableDefaultEmbeddedResourceItems

The EnableDefaultEmbeddedResourceItems property controls whether embedded resource items are implicitly included in the project. The default value is true. Set the EnableDefaultEmbeddedResourceItems property to false to disable implicit inclusion of embedded resource files.

<PropertyGroup>
  <EnableDefaultEmbeddedResourceItems>false</EnableDefaultEmbeddedResourceItems>
</PropertyGroup>

EnableDefaultNoneItems

The EnableDefaultNoneItems property controls whether None items (files that have no role in the build process) are implicitly included in the project. The default value is true. Set the EnableDefaultNoneItems property to false to disable implicit inclusion of None items.

<PropertyGroup>
  <EnableDefaultNoneItems>false</EnableDefaultNoneItems>
</PropertyGroup>

Code analysis properties

The following MSBuild properties are documented in this section:

AnalysisLevel

The AnalysisLevel property lets you specify a set of code analyzers to run according to a .NET release. Each .NET release has a set of code analysis rules. Of that set, the rules that are enabled by default for that release analyze your code. For example, if you upgrade from .NET 8 to .NET 9 but don't want the default set of code analysis rules to change, set AnalysisLevel to 8.

<PropertyGroup>
  <AnalysisLevel>8</AnalysisLevel>
</PropertyGroup>

Optionally, you can specify a compound value for this property that also specifies how aggressively to enable rules. Compound values take the form <version>-<mode>, where the <mode> value is one of the AnalysisMode values. The following example uses the preview version of code analyzers, and enables the recommended set of rules.

<PropertyGroup>
  <AnalysisLevel>preview-recommended</AnalysisLevel>
</PropertyGroup>

Default value:

  • If your project targets .NET 5 or later, or if you've added the AnalysisMode property, the default value is latest.
  • Otherwise, this property is omitted unless you explicitly add it to the project file.

The following table shows the values you can specify.

Value Meaning
latest The latest code analyzers that have been released are used. This is the default.
latest-<mode> The latest code analyzers that have been released are used. The <mode> value determines which rules are enabled.
preview The latest code analyzers are used, even if they are in preview.
preview-<mode> The latest code analyzers are used, even if they are in preview. The <mode> value determines which rules are enabled.
9.0 The set of rules that was available for the .NET 9 release is used, even if newer rules are available.
9.0-<mode> The set of rules that was available for the .NET 9 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.
9 The set of rules that was available for the .NET 9 release is used, even if newer rules are available.
9-<mode> The set of rules that was available for the .NET 9 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.
8.0 The set of rules that was available for the .NET 8 release is used, even if newer rules are available.
8.0-<mode> The set of rules that was available for the .NET 8 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.
8 The set of rules that was available for the .NET 8 release is used, even if newer rules are available.
8-<mode> The set of rules that was available for the .NET 8 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.
7.0 The set of rules that was available for the .NET 7 release is used, even if newer rules are available.
7.0-<mode> The set of rules that was available for the .NET 7 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.
7 The set of rules that was available for the .NET 7 release is used, even if newer rules are available.
7-<mode> The set of rules that was available for the .NET 7 release is used, even if newer rules are available. The <mode> value determines which rules are enabled.

Note

  • If you set EnforceCodeStyleInBuild to true, this property affects code-style (IDEXXXX) rules (in addition to code-quality rules).
  • If you set a compound value for AnalysisLevel, you don't need to specify an AnalysisMode. However, if you do, AnalysisLevel takes precedence over AnalysisMode.
  • This property has no effect on code analysis in projects that don't reference a project SDK, for example, legacy .NET Framework projects that reference the Microsoft.CodeAnalysis.NetAnalyzers NuGet package.

AnalysisLevel<Category>

This property is the same as AnalysisLevel, except that it only applies to a specific category of code-analysis rules. This property allows you to use a different version of code analyzers for a specific category, or to enable or disable rules at a different level to the other rule categories. If you omit this property for a particular category of rules, it defaults to the AnalysisLevel value. The available values are the same as those for AnalysisLevel.

<PropertyGroup>
  <AnalysisLevelSecurity>preview</AnalysisLevelSecurity>
</PropertyGroup>

<PropertyGroup>
  <AnalysisLevelSecurity>preview-recommended</AnalysisLevelSecurity>
</PropertyGroup>

The following table lists the property name for each rule category.

Property name Rule category
<AnalysisLevelDesign> Design rules
<AnalysisLevelDocumentation> Documentation rules
<AnalysisLevelGlobalization> Globalization rules
<AnalysisLevelInteroperability> Portability and interoperability rules
<AnalysisLevelMaintainability> Maintainability rules
<AnalysisLevelNaming> Naming rules
<AnalysisLevelPerformance> Performance rules
<AnalysisLevelSingleFile> Single-file application rules
<AnalysisLevelReliability> Reliability rules
<AnalysisLevelSecurity> Security rules
<AnalysisLevelStyle> Code-style (IDEXXXX) rules
<AnalysisLevelUsage> Usage rules

AnalysisMode

The .NET SDK ships with all of the "CA" code quality rules. By default, only some rules are enabled as build warnings in each .NET release. The AnalysisMode property lets you customize the set of rules that's enabled by default. You can either switch to a more aggressive analysis mode where you can opt out of rules individually, or a more conservative analysis mode where you can opt in to specific rules. For example, if you want to enable all rules as build warnings, set the value to All.

<PropertyGroup>
  <AnalysisMode>All</AnalysisMode>
</PropertyGroup>

The following table shows the available option values. They're listed in increasing order of the number of rules they enable.

Value Description
None All rules are disabled. You can selectively opt in to individual rules to enable them.
Default Default mode, where certain rules are enabled as build warnings, certain rules are enabled as Visual Studio IDE suggestions, and the remainder are disabled.
Minimum More aggressive mode than Default mode. Certain suggestions that are highly recommended for build enforcement are enabled as build warnings. To see which rules this includes, inspect the %ProgramFiles%/dotnet/sdk/[version]/Sdks/Microsoft.NET.Sdk/analyzers/build/config/analysislevel_[level]_minimum.editorconfig file.
Recommended More aggressive mode than Minimum mode, where more rules are enabled as build warnings. To see which rules this includes, inspect the %ProgramFiles%/dotnet/sdk/[version]/Sdks/Microsoft.NET.Sdk/analyzers/build/config/analysislevel_[level]_recommended.editorconfig file.
All All rules are enabled as build warnings*. You can selectively opt out of individual rules to disable them.

* The following rules are not enabled by setting AnalysisMode to All or by setting AnalysisLevel to latest-all: CA1017, CA1045, CA1005, CA1014, CA1060, CA1021, and the code metrics analyzer rules (CA1501, CA1502, CA1505, CA1506, and CA1509). These legacy rules might be deprecated in a future version. However, you can still enable them individually using a dotnet_diagnostic.CAxxxx.severity = <severity> entry.

Note

  • If you set EnforceCodeStyleInBuild to true, this property affects code-style (IDEXXXX) rules (in addition to code-quality rules).
  • If you use a compound value for AnalysisLevel, for example, <AnalysisLevel>9-recommended</AnalysisLevel>, you can omit this property entirely. However, if you specify both properties, AnalysisLevel takes precedence over AnalysisMode.
  • This property has no effect on code analysis in projects that don't reference a project SDK, for example, legacy .NET Framework projects that reference the Microsoft.CodeAnalysis.NetAnalyzers NuGet package.

AnalysisMode<Category>

This property is the same as AnalysisMode, except that it only applies to a specific category of code-analysis rules. This property allows you to enable or disable rules at a different level to the other rule categories. If you omit this property for a particular category of rules, it defaults to the AnalysisMode value. The available values are the same as those for AnalysisMode.

<PropertyGroup>
  <AnalysisModeSecurity>All</AnalysisModeSecurity>
</PropertyGroup>

The following table lists the property name for each rule category.

Property name Rule category
<AnalysisModeDesign> Design rules
<AnalysisModeDocumentation> Documentation rules
<AnalysisModeGlobalization> Globalization rules
<AnalysisModeInteroperability> Portability and interoperability rules
<AnalysisModeMaintainability> Maintainability rules
<AnalysisModeNaming> Naming rules
<AnalysisModePerformance> Performance rules
<AnalysisModeSingleFile> Single-file application rules
<AnalysisModeReliability> Reliability rules
<AnalysisModeSecurity> Security rules
<AnalysisModeStyle> Code-style (IDEXXXX) rules
<AnalysisModeUsage> Usage rules

CodeAnalysisTreatWarningsAsErrors

The CodeAnalysisTreatWarningsAsErrors property lets you configure whether code quality analysis warnings (CAxxxx) should be treated as warnings and break the build. If you use the -warnaserror flag when you build your projects, .NET code quality analysis warnings are also treated as errors. If you do not want code quality analysis warnings to be treated as errors, you can set the CodeAnalysisTreatWarningsAsErrors MSBuild property to false in your project file.

<PropertyGroup>
  <CodeAnalysisTreatWarningsAsErrors>false</CodeAnalysisTreatWarningsAsErrors>
</PropertyGroup>

EnableNETAnalyzers

.NET code quality analysis is enabled, by default, for projects that target .NET 5 or a later version. If you're developing using the .NET 5+ SDK, you can enable .NET code analysis for SDK-style projects that target earlier versions of .NET by setting the EnableNETAnalyzers property to true. To disable code analysis in any project, set this property to false.

<PropertyGroup>
  <EnableNETAnalyzers>true</EnableNETAnalyzers>
</PropertyGroup>

Note

This property applies specifically to the built-in analyzers in the .NET 5+ SDK. It should not be used when you install a NuGet code analysis package.

EnforceCodeStyleInBuild

.NET code style analysis is disabled, by default, on build for all .NET projects. You can enable code style analysis for .NET projects by setting the EnforceCodeStyleInBuild property to true.

<PropertyGroup>
  <EnforceCodeStyleInBuild>true</EnforceCodeStyleInBuild>
</PropertyGroup>

All code style rules that are configured to be warnings or errors will execute on build and report violations.

_SkipUpgradeNetAnalyzersNuGetWarning

The _SkipUpgradeNetAnalyzersNuGetWarning property lets you configure whether you receive a warning if you're using code analyzers from a NuGet package that's out-of-date when compared with the code analyzers in the latest .NET SDK. The warning looks similar to:

The .NET SDK has newer analyzers with version '6.0.0' than what version '5.0.3' of 'Microsoft.CodeAnalysis.NetAnalyzers' package provides. Update or remove this package reference.

To remove this warning and continue to use the version of code analyzers in the NuGet package, set _SkipUpgradeNetAnalyzersNuGetWarning to true in your project file.

<PropertyGroup>
  <_SkipUpgradeNetAnalyzersNuGetWarning>true</_SkipUpgradeNetAnalyzersNuGetWarning>
</PropertyGroup>

Runtime configuration properties

You can configure some runtime behaviors by specifying MSBuild properties in the project file of the app. For information about other ways of configuring runtime behavior, see Runtime configuration settings.

AutoreleasePoolSupport

The AutoreleasePoolSupport property configures whether each managed thread receives an implicit NSAutoreleasePool when running on a supported macOS platform. For more information, see AutoreleasePool for managed threads.

<PropertyGroup>
  <AutoreleasePoolSupport>true</AutoreleasePoolSupport>
</PropertyGroup>

ConcurrentGarbageCollection

The ConcurrentGarbageCollection property configures whether background (concurrent) garbage collection is enabled. Set the value to false to disable background garbage collection. For more information, see Background GC.

<PropertyGroup>
  <ConcurrentGarbageCollection>false</ConcurrentGarbageCollection>
</PropertyGroup>

InvariantGlobalization

The InvariantGlobalization property configures whether the app runs in globalization-invariant mode, which means it doesn't have access to culture-specific data. Set the value to true to run in globalization-invariant mode. For more information, see Invariant mode.

<PropertyGroup>
  <InvariantGlobalization>true</InvariantGlobalization>
</PropertyGroup>

PredefinedCulturesOnly

In .NET 6 and later versions, the PredefinedCulturesOnly property configures whether apps can create cultures other than the invariant culture when globalization-invariant mode is enabled. The default is true. Set the value to false to allow creation of any new culture in globalization-invariant mode.

<PropertyGroup>
  <PredefinedCulturesOnly>false</PredefinedCulturesOnly>
</PropertyGroup>

For more information, see Culture creation and case mapping in globalization-invariant mode.

RetainVMGarbageCollection

The RetainVMGarbageCollection property configures the garbage collector to put deleted memory segments on a standby list for future use or release them. Setting the value to true tells the garbage collector to put the segments on a standby list. For more information, see Retain VM.

<PropertyGroup>
  <RetainVMGarbageCollection>true</RetainVMGarbageCollection>
</PropertyGroup>

ServerGarbageCollection

The ServerGarbageCollection property configures whether the application uses workstation garbage collection or server garbage collection. Set the value to true to use server garbage collection. For more information, see Workstation vs. server.

<PropertyGroup>
  <ServerGarbageCollection>true</ServerGarbageCollection>
</PropertyGroup>

ThreadPoolMaxThreads

The ThreadPoolMaxThreads property configures the maximum number of threads for the worker thread pool. For more information, see Maximum threads.

<PropertyGroup>
  <ThreadPoolMaxThreads>20</ThreadPoolMaxThreads>
</PropertyGroup>

ThreadPoolMinThreads

The ThreadPoolMinThreads property configures the minimum number of threads for the worker thread pool. For more information, see Minimum threads.

<PropertyGroup>
  <ThreadPoolMinThreads>4</ThreadPoolMinThreads>
</PropertyGroup>

TieredCompilation

The TieredCompilation property configures whether the just-in-time (JIT) compiler uses tiered compilation. Set the value to false to disable tiered compilation. For more information, see Tiered compilation.

<PropertyGroup>
  <TieredCompilation>false</TieredCompilation>
</PropertyGroup>

TieredCompilationQuickJit

The TieredCompilationQuickJit property configures whether the JIT compiler uses quick JIT. Set the value to false to disable quick JIT. For more information, see Quick JIT.

<PropertyGroup>
  <TieredCompilationQuickJit>false</TieredCompilationQuickJit>
</PropertyGroup>

TieredCompilationQuickJitForLoops

The TieredCompilationQuickJitForLoops property configures whether the JIT compiler uses quick JIT on methods that contain loops. Set the value to true to enable quick JIT on methods that contain loops. For more information, see Quick JIT for loops.

<PropertyGroup>
  <TieredCompilationQuickJitForLoops>true</TieredCompilationQuickJitForLoops>
</PropertyGroup>

TieredPGO

The TieredPGO property controls whether dynamic or tiered profile-guided optimization (PGO) is enabled. Set the value to true to enable tiered PGO. For more information, see Profile-guided optimization.

<PropertyGroup>
  <TieredPGO>true</TieredPGO>
</PropertyGroup>

UseWindowsThreadPool

The UseWindowsThreadPool property configures whether thread pool thread management is delegated to the Windows thread pool (Windows only). The default value is false, in which case the .NET thread pool is used. For more information, see Windows thread pool.

<PropertyGroup>
  <UseWindowsThreadPool>true</UseWindowsThreadPool>
</PropertyGroup>

The following MSBuild properties are documented in this section:

AssetTargetFallback

The AssetTargetFallback property lets you specify additional compatible framework versions for project references and NuGet packages. For example, if you specify a package dependency using PackageReference but that package doesn't contain assets that are compatible with your projects's TargetFramework, the AssetTargetFallback property comes into play. The compatibility of the referenced package is rechecked using each target framework that's specified in AssetTargetFallback. This property replaces the deprecated property PackageTargetFallback.

You can set the AssetTargetFallback property to one or more target framework versions.

<PropertyGroup>
  <AssetTargetFallback>net461</AssetTargetFallback>
</PropertyGroup>

DisableImplicitFrameworkReferences

The DisableImplicitFrameworkReferences property controls implicit FrameworkReference items when targeting .NET Core 3.0 and later versions. When targeting .NET Core 2.1 or .NET Standard 2.0 and earlier versions, it controls implicit PackageReference items to packages in a metapackage. (A metapackage is a framework-based package that consists only of dependencies on other packages.) This property also controls implicit references such as System and System.Core when targeting .NET Framework.

Set this property to true to disable implicit FrameworkReference or PackageReference items. If you set this property to true, you can add explicit references to just the frameworks or packages you need.

<PropertyGroup>
  <DisableImplicitFrameworkReferences>true</DisableImplicitFrameworkReferences>
</PropertyGroup>

DisableTransitiveFrameworkReferenceDownloads

Set the DisableTransitiveFrameworkReferenceDownloads property to true to avoid downloading extra runtime and targeting packs that aren't directly referenced by your project.

<PropertyGroup>
  <DisableTransitiveFrameworkReferenceDownloads>true</DisableTransitiveFrameworkReferenceDownloads>
</PropertyGroup>

DisableTransitiveProjectReferences

The DisableTransitiveProjectReferences property controls implicit project references. Set this property to true to disable implicit ProjectReference items. Disabling implicit project references results in non-transitive behavior similar to the legacy project system.

When this property is true, it has a similar effect to that of setting PrivateAssets="All" on all of the dependencies of the depended-upon project.

If you set this property to true, you can add explicit references to just the projects you need.

<PropertyGroup>
  <DisableTransitiveProjectReferences>true</DisableTransitiveProjectReferences>
</PropertyGroup>

ManagePackageVersionsCentrally

The ManagePackageVersionsCentrally property was introduced in .NET 7. By setting it to true in a Directory.Packages.props file in the root of your repository, you can manage common dependencies in your projects from one location. Add versions for common package dependencies using PackageVersion items in the Directory.Packages.props file. Then, in the individual project files, you can omit Version attributes from any PackageReference items that refer to centrally managed packages.

Example Directory.Packages.props file:

<PropertyGroup>
  <ManagePackageVersionsCentrally>true</ManagePackageVersionsCentrally>
</PropertyGroup>
...
<ItemGroup>
  <PackageVersion Include="Microsoft.Extensions.Configuration" Version="7.0.0" />
</ItemGroup>

Individual project file:

<ItemGroup>
  <PackageReference Include="Microsoft.Extensions.Configuration" />
</ItemGroup>

For more information, see central package management (CPM).

Restoring a referenced package installs all of its direct dependencies and all the dependencies of those dependencies. You can customize package restoration by specifying properties such as RestorePackagesPath and RestoreIgnoreFailedSources. For more information about these and other properties, see restore target.

<PropertyGroup>
  <RestoreIgnoreFailedSource>true</RestoreIgnoreFailedSource>
</PropertyGroup>

UseMauiEssentials

Set the UseMauiEssentials property to true to declare an explicit reference to a project or package that depends on MAUI Essentials. This setting ensures that your project pulls in the correct known framework reference for MAUI Essentials. If your project references a project that uses MAUI Essentials but you don't set this property to true, you might encounter build warning NETSDK1186.

<PropertyGroup>
  <UseMauiEssentials>true</UseMauiEssentials>
</PropertyGroup>

ValidateExecutableReferencesMatchSelfContained

The ValidateExecutableReferencesMatchSelfContained property can be used to disable errors related to executable project references. If .NET detects that a self-contained executable project references a framework-dependent executable project, or vice versa, it generates errors NETSDK1150 and NETSDK1151, respectively. To avoid these errors when the reference is intentional, set the ValidateExecutableReferencesMatchSelfContained property to false.

<PropertyGroup>
  <ValidateExecutableReferencesMatchSelfContained>false</ValidateExecutableReferencesMatchSelfContained>
</PropertyGroup>

WindowsSdkPackageVersion

The WindowsSdkPackageVersion property can be used to override the version of the Windows SDK targeting package. This property was introduced in .NET 5, and replaces the use of the FrameworkReference item for this purpose.

<PropertyGroup>
  <WindowsSdkPackageVersion>10.0.19041.18</WindowsSdkPackageVersion>
</PropertyGroup>

Note

We don't recommend overriding the Windows SDK version, because the Windows SDK targeting packages are included with the .NET 5+ SDK. Instead, to reference the latest Windows SDK package, update your version of the .NET SDK. This property should only be used in rare cases such as using preview packages or needing to override the version of C#/WinRT.

The following properties are used for launching an app with the dotnet run command:

RunArguments

The RunArguments property defines the arguments that are passed to the app when it's run.

<PropertyGroup>
  <RunArguments>-mode dryrun</RunArguments>
</PropertyGroup>

Tip

You can specify additional arguments to be passed to the app by using the -- option for dotnet run.

RunWorkingDirectory

The RunWorkingDirectory property defines the working directory for the application process to be started in. It can be an absolute path or a path that's relative to the project directory. If you don't specify a directory, OutDir is used as the working directory.

<PropertyGroup>
  <RunWorkingDirectory>c:\temp</RunWorkingDirectory>
</PropertyGroup>

The following MSBuild properties are documented in this section:

SdkAnalysisLevel

Introduced in .NET 9, the SdkAnalysisLevel property can be used to configure how strict SDK tooling is. It helps you manage SDK warning levels in situations where you might not be able to pin SDKs via global.json or other means. You can use this property to tell a newer SDK to behave as if it were an older SDK, with regards to a specific tool or feature, without having to install the older SDK.

The allowed values of this property are SDK feature bands, for example, 8.0.100 and 8.0.400. The value defaults to the SDK feature band of the running SDK. For example, for SDK 9.0.102, the value would be 9.0.100. (For information about how the .NET SDK is versioned, see How .NET is versioned.)

<PropertyGroup>
  <SdkAnalysisLevel>8.0.400</SdkAnalysisLevel>
</PropertyGroup>

For more information, see SDK Analysis Level Property and Usage.

Test project–related properties

The following MSBuild properties are documented in this section:

IsTestProject

The IsTestProject property signifies that a project is a test project. When this property is set to true, validation to check if the project references a self-contained executable is disabled. That's because test projects have an OutputType of Exe but usually call APIs in a referenced executable rather than trying to run. In addition, if a project references a project where IsTestProject is set to true, the test project isn't validated as an executable reference.

This property is mainly needed for the dotnet test scenario and has no impact when using vstest.console.exe.

Note

If your project specifies the MSTest SDK, you don't need to set this property. It's set automatically. Similarly, this property is set automatically for projects that reference the Microsoft.NET.Test.Sdk NuGet package linked to VSTest.

IsTestingPlatformApplication

When your project references the Microsoft.Testing.Platform.MSBuild package, setting IsTestingPlatformApplication to true (which is also the default value if not specified) does the following:

  • Generates the entry point to the test project.
  • Generates the configuration file.
  • Detects the extensions.

Setting the property to false disables the transitive dependency to the package. A transitive dependency is when a project that references another project that references a given package behaves as if it references the package. You'd typically set this property to false in a non-test project that references a test project. For more information, see error CS8892.

If your test project references MSTest, NUnit, or xUnit, this property is set to the same value as EnableMSTestRunner, EnableNUnitRunner, or UseMicrosoftTestingPlatformRunner (for xUnit).

Enable[NugetPackageNameWithoutDots]

Use a property with the pattern Enable[NugetPackageNameWithoutDots] to enable or disable Microsoft.Testing.Platform extensions.

For example, to enable the crash dump extension (NuGet package Microsoft.Testing.Extensions.CrashDump), set the EnableMicrosoftTestingExtensionsCrashDump to true.

For more information, see Enable or disable extensions.

EnableAspireTesting

When you use the MSTest project SDK, you can use the EnableAspireTesting property to bring in all the dependencies and default using directives you need for testing with Aspire and MSTest. This property is available in MSTest 3.4 and later versions.

For more information, see Test with .NET Aspire.

EnablePlaywright

When you use the MSTest project SDK, you can use the EnablePlaywright property to bring in all the dependencies and default using directives you need for testing with Playwright and MSTest.This property is available in MSTest 3.4 and later versions.

For more information, see Playwright.

EnableMSTestRunner

The EnableMSTestRunner property enables or disables the use of the MSTest runner. The MSTest runner is a lightweight and portable alternative to VSTest. This property is available in MSTest 3.2 and later versions.

Note

If your project specifies the MSTest SDK, you don't need to set this property. It's set automatically.

EnableNUnitRunner

The EnableNUnitRunner property enables or disables the use of the NUnit runner. The NUnit runner is a lightweight and portable alternative to VSTest. This property is available in NUnit3TestAdapter in version 5.0 and later.

GenerateTestingPlatformEntryPoint

Setting the GenerateTestingPlatformEntryPoint property to false disables the automatic generation of the program entry point in an MSTest, NUnit, or xUnit test project. You might want to set this property to false when you manually define an entry point, or when you reference a test project from an executable that also has an entry point.

For more information, see error CS8892.

To control the generation of the entry point in a VSTest project, use the GenerateProgramFile property.

TestingPlatformCaptureOutput

The TestingPlatformCaptureOutput property controls whether all console output that a test executable writes is captured and hidden from the user when you use dotnet test to run Microsoft.Testing.Platform tests. By default, the console output is hidden. This output includes the banner, version information, and formatted test information. Set this property to false to show this information together with MSBuild output.

For more information, see Show complete platform output.

TestingPlatformCommandLineArguments

The TestingPlatformCaptureOutput property lets you specify command-line arguments to the test app when you use dotnet test to run Microsoft.Testing.Platform tests. The following project file snippet shows an example.

<PropertyGroup>
  ...
  <TestingPlatformCommandLineArguments>--minimum-expected-tests 10</TestingPlatformCommandLineArguments>
</PropertyGroup>

TestingPlatformDotnetTestSupport

The TestingPlatformDotnetTestSupport property lets you specify whether VSTest is used when you use dotnet test to run tests. If you set this property to true, VSTest is disabled and all Microsoft.Testing.Platform tests are run directly.

If you have a solution that contains VSTest test projects as well as MSTest, NUnit, or XUnit projects, you should make one call per mode (that is, dotnet test won't run tests from both VSTest and the newer platforms in one call).

TestingPlatformShowTestsFailure

The TestingPlatformShowTestsFailure property lets you control whether a single failure or all errors in a failed test are reported when you use dotnet test to run tests. By default, test failures are summarized into a .log file, and a single failure per test project is reported to MSBuild. To show errors per failed test, set this property to true in your project file.

TestingExtensionsProfile

When you use the MSTest project SDK, the TestingExtensionsProfile property lets you select a profile to use. The following table shows the allowable values.

Value Description
Default Enables the recommended extensions for this version of MSTest.SDK.
None No extensions are enabled.
AllMicrosoft Enable all extensions shipped by Microsoft (including extensions with a restrictive license).

For more information, see MSTest runner profile.

UseVSTest

Set the UseVSTest property to true to switch from the MSTest runner to the VSTest runner when using the MSTest project SDK.

The following MSBuild properties are documented in this section:

AppHostDotNetSearch

The AppHostDotNetSearch property configures how the native executable produced for an application will search for a .NET installation. This property only impacts the executable produced on publish, not build.

<PropertyGroup>
  <AppHostDotNetSearch>Global</AppHostDotNetSearch>
</PropertyGroup>

The following table lists valid values. You can specify multiple values, separated by semi-colons.

Value Meaning
AppLocal App executable's folder
AppRelative Path relative to the app executable as specified by AppHostRelativeDotNet
EnvironmentVariables Value of DOTNET_ROOT[_<arch>] environment variables
Global Registered and default global install locations

This property was introduced in .NET 9.

AppHostRelativeDotNet

The AppHostRelativeDotNet property allows specifying a relative path for the app executable to look for the .NET installation when it's configured to do so. Setting the AppHostRelativeDotNet property implies that AppHostDotNetSearch is AppRelative. This property only impacts the executable produced on publish, not build.

<PropertyGroup>
  <AppHostRelativeDotNet>./relative/path/to/runtime</AppHostRelativeDotNet>
</PropertyGroup>

This property was introduced in .NET 9.

EnableComHosting

The EnableComHosting property indicates that an assembly provides a COM server. Setting the EnableComHosting to true also implies that EnableDynamicLoading is true.

<PropertyGroup>
  <EnableComHosting>True</EnableComHosting>
</PropertyGroup>

For more information, see Expose .NET components to COM.

EnableDynamicLoading

The EnableDynamicLoading property indicates that an assembly is a dynamically loaded component. The component could be a COM library or a non-COM library that can be used from a native host or used as a plugin. Setting this property to true has the following effects:

  • A .runtimeconfig.json file is generated.
  • RollForward is set to LatestMinor.
  • NuGet references are copied locally.
<PropertyGroup>
  <EnableDynamicLoading>true</EnableDynamicLoading>
</PropertyGroup>

Generated file properties

The following properties concern code in generated files:

DisableImplicitNamespaceImports

The DisableImplicitNamespaceImports property can be used to disable implicit namespace imports in Visual Basic projects that target .NET 6 or a later version. Implicit namespaces are the default namespaces that are imported globally in a Visual Basic project. Set this property to true to disable implicit namespace imports.

<PropertyGroup>
  <DisableImplicitNamespaceImports>true</DisableImplicitNamespaceImports>
</PropertyGroup>

ImplicitUsings

The ImplicitUsings property can be used to enable and disable implicit global using directives in C# projects that target .NET 6 or a later version and C# 10 or a later version. When the feature is enabled, the .NET SDK adds global using directives for a set of default namespaces based on the type of project SDK. Set this property to true or enable to enable implicit global using directives. To disable implicit global using directives, remove the property or set it to false or disable.

<PropertyGroup>
  <ImplicitUsings>enable</ImplicitUsings>
</PropertyGroup>

Note

The templates for new C# projects that target .NET 6 or later have ImplicitUsings set to enable by default.

To define an explicit global using directive, add a Using item.

Items

MSBuild items are inputs into the build system. Items are specified according to their type, which is the element name. For example, Compile and Reference are two common item types. The following additional item types are made available by the .NET SDK:

You can use any of the standard item attributes, for example, Include and Update, on these items. Use Include to add a new item, and use Update to modify an existing item. For example, Update is often used to modify an item that has implicitly been added by the .NET SDK.

AssemblyMetadata

The AssemblyMetadata item specifies a key-value pair AssemblyMetadataAttribute assembly attribute. The Include metadata becomes the key, and the Value metadata becomes the value.

<ItemGroup>
  <AssemblyMetadata Include="Serviceable" Value="True" />
</ItemGroup>

InternalsVisibleTo

The InternalsVisibleTo item generates an InternalsVisibleToAttribute assembly attribute for the specified friend assembly.

<ItemGroup>
  <InternalsVisibleTo Include="MyProject.Tests" />
</ItemGroup>

If the friend assembly is signed, you can specify an optional Key metadata to specify its full public key. If you don't specify Key metadata and a $(PublicKey) is available, that key is used. Otherwise, no public key is added to the attribute.

FrameworkReference

The FrameworkReference item defines a reference to a .NET shared framework.

The Include attribute specifies the framework ID.

The project file snippet in the following example references the Microsoft.AspNetCore.App shared framework.

<ItemGroup>
  <FrameworkReference Include="Microsoft.AspNetCore.App" />
</ItemGroup>

PackageReference

The PackageReference item defines a reference to a NuGet package.

The Include attribute specifies the package ID. The Version attribute specifies the version or version range. For information about how to specify a minimum version, maximum version, range, or exact match, see Version ranges.

The project file snippet in the following example references the System.Runtime package.

<ItemGroup>
  <PackageReference Include="System.Runtime" Version="4.3.0" />
</ItemGroup>

You can also control dependency assets using metadata such as PrivateAssets.

<ItemGroup>
  <PackageReference Include="Contoso.Utility.UsefulStuff" Version="3.6.0">
    <PrivateAssets>all</PrivateAssets>
  </PackageReference>
</ItemGroup>

For more information, see Package references in project files.

TrimmerRootAssembly

The TrimmerRootAssembly item lets you exclude an assembly from trimming. Trimming is the process of removing unused parts of the runtime from a packaged application. In some cases, trimming might incorrectly remove required references.

The following XML excludes the System.Security assembly from trimming.

<ItemGroup>
  <TrimmerRootAssembly Include="System.Security" />
</ItemGroup>

For more information, see Trimming options.

Using

The Using item lets you globally include a namespace across your C# project, such that you don't have to add a using directive for the namespace at the top of your source files. This item is similar to the Import item that can be used for the same purpose in Visual Basic projects. This property is available starting in .NET 6.

<ItemGroup>
  <Using Include="My.Awesome.Namespace" />
</ItemGroup>

You can also use the Using item to define global using <alias> and using static <type> directives.

<ItemGroup>
  <Using Include="My.Awesome.Namespace" Alias="Awesome" />
</ItemGroup>

For example:

  • <Using Include="Microsoft.AspNetCore.Http.Results" Alias="Results" /> emits global using Results = global::Microsoft.AspNetCore.Http.Results;
  • <Using Include="Microsoft.AspNetCore.Http.Results" Static="True" /> emits global using static global::Microsoft.AspNetCore.Http.Results;

For more information, see aliased using directives and using static <type> directives.

Item metadata

In addition to the standard MSBuild item attributes, the following item metadata tags are made available by the .NET SDK:

CopyToPublishDirectory

The CopyToPublishDirectory metadata on an MSBuild item controls when the item is copied to the publish directory. Allowable values are PreserveNewest, which only copies the item if it has changed, Always, which always copies the item, and Never, which never copies the item. From a performance standpoint, PreserveNewest is preferable because it enables an incremental build.

<ItemGroup>
  <None Update="appsettings.Development.json" CopyToOutputDirectory="PreserveNewest" CopyToPublishDirectory="PreserveNewest" />
</ItemGroup>

LinkBase

For an item that's outside of the project directory and its subdirectories, the publish target uses the item's Link metadata to determine where to copy the item to. Link also determines how items outside of the project tree are displayed in the Solution Explorer window of Visual Studio.

If Link is not specified for an item that's outside of the project cone, it defaults to %(LinkBase)\%(RecursiveDir)%(Filename)%(Extension). LinkBase lets you specify a sensible base folder for items outside of the project cone. The folder hierarchy under the base folder is preserved via RecursiveDir. If LinkBase is not specified, it's omitted from the Link path.

<ItemGroup>
  <Content Include="..\Extras\**\*.cs" LinkBase="Shared"/>
</ItemGroup>

The following image shows how a file that's included via the previous item Include glob displays in Solution Explorer.

Solution Explorer showing item with LinkBase metadata.

See also