IPStatus Enum

Reference

Definition

Namespace:: System.Net.NetworkInformation

Assembly:: System.Net.Ping.dll

Assembly:: System.dll

Assembly:: netstandard.dll

Important

Some information relates to prerelease product that may be substantially modified before it’s released. Microsoft makes no warranties, express or implied, with respect to the information provided here.

Reports the status of sending an Internet Control Message Protocol (ICMP) echo message to a computer.

public enum class IPStatus

public enum IPStatus

type IPStatus =

Public Enum IPStatus

Inheritance: Object

ValueType

Enum
IPStatus

Fields

Name	Value	Description
Unknown	-1	The ICMP echo request failed for an unknown reason.
Success	0	The ICMP echo request succeeded; an ICMP echo reply was received. When you get this status code, the other PingReply properties contain valid data.
DestinationNetworkUnreachable	11002	The ICMP echo request failed because the network that contains the destination computer is not reachable.
DestinationHostUnreachable	11003	The ICMP echo request failed because the destination computer is not reachable.
DestinationProhibited	11004	The ICMPv6 echo request failed because contact with the destination computer is administratively prohibited. This value applies only to IPv6.
DestinationProtocolUnreachable	11004	The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable, because it does not support the packet's protocol. This value applies only to IPv4. This value is described in IETF RFC 1812 as Communication Administratively Prohibited.
DestinationPortUnreachable	11005	The ICMP echo request failed because the port on the destination computer is not available.
NoResources	11006	The ICMP echo request failed because of insufficient network resources.
BadOption	11007	The ICMP echo request failed because it contains an invalid option.
HardwareError	11008	The ICMP echo request failed because of a hardware error.
PacketTooBig	11009	The ICMP echo request failed because the packet containing the request is larger than the maximum transmission unit (MTU) of a node (router or gateway) located between the source and destination. The MTU defines the maximum size of a transmittable packet.
TimedOut	11010	The ICMP echo Reply was not received within the allotted time. The default time allowed for replies is 5 seconds. You can change this value using the Send or SendAsync methods that take a `timeout` parameter.
BadRoute	11012	The ICMP echo request failed because there is no valid route between the source and destination computers.
TtlExpired	11013	The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet.
TtlReassemblyTimeExceeded	11014	The ICMP echo request failed because the packet was divided into fragments for transmission and all of the fragments were not received within the time allotted for reassembly. RFC 2460 specifies 60 seconds as the time limit within which all packet fragments must be received.
ParameterProblem	11015	The ICMP echo request failed because a node (router or gateway) encountered problems while processing the packet header. This is the status if, for example, the header contains invalid field data or an unrecognized option.
SourceQuench	11016	The ICMP echo request failed because the packet was discarded. This occurs when the source computer's output queue has insufficient storage space, or when packets arrive at the destination too quickly to be processed.
BadDestination	11018	The ICMP echo request failed because the destination IP address cannot receive ICMP echo requests or should never appear in the destination address field of any IP datagram. For example, calling Send and specifying IP address "000.0.0.0" returns this status.
DestinationUnreachable	11040	The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable; the exact cause of problem is unknown.
TimeExceeded	11041	The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet.
BadHeader	11042	The ICMP echo request failed because the header is invalid.
UnrecognizedNextHeader	11043	The ICMP echo request failed because the Next Header field does not contain a recognized value. The Next Header field indicates the extension header type (if present) or the protocol above the IP layer, for example, TCP or UDP.
IcmpError	11044	The ICMP echo request failed because of an ICMP protocol error.
DestinationScopeMismatch	11045	The ICMP echo request failed because the source address and destination address that are specified in an ICMP echo message are not in the same scope. This is typically caused by a router forwarding a packet using an interface that is outside the scope of the source address. Address scopes (link-local, site-local, and global scope) determine where on the network an address is valid.

Examples

The following code example sends an ICMP echo message and checks the status.

#using <System.dll>

using namespace System;
using namespace System::Net;
using namespace System::Net::NetworkInformation;
using namespace System::Text;

// args[1] can be an IPaddress or host name.
int main()
{
   array<String^>^args = Environment::GetCommandLineArgs();
   
   Ping ^ pingSender = gcnew Ping;
   PingOptions ^ options = gcnew PingOptions;
   
   // Use the default Ttl value which is 128,
   // but change the fragmentation behavior.
   options->DontFragment = true;
   
   // Create a buffer of 32 bytes of data to be transmitted.
   String^ data = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa";
   array<Byte>^buffer = Encoding::ASCII->GetBytes( data );
   int timeout = 120;
   PingReply ^ reply = pingSender->Send( args[ 1 ], timeout, buffer, options );
   
   if ( reply->Status == IPStatus::Success )
   {
      Console::WriteLine( "Address: {0}", reply->Address->ToString() );
      Console::WriteLine( "RoundTrip time: {0}", reply->RoundtripTime );
      Console::WriteLine( "Time to live: {0}", reply->Options->Ttl );
      Console::WriteLine( "Don't fragment: {0}", reply->Options->DontFragment );
      Console::WriteLine( "Buffer size: {0}", reply->Buffer->Length );
   }

   
}

using System;
using System.Net;
using System.Net.NetworkInformation;
using System.Text;

namespace Examples.System.Net.NetworkInformation.PingTest
{
    public class PingExample
    {
        // args[0] can be an IPaddress or host name.
        public static void Main (string[] args)
        {
            Ping pingSender = new Ping ();
            PingOptions options = new PingOptions ();

            // Use the default Ttl value which is 128,
            // but change the fragmentation behavior.
            options.DontFragment = true;

            // Create a buffer of 32 bytes of data to be transmitted.
            string data = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa";
            byte[] buffer = Encoding.ASCII.GetBytes (data);
            int timeout = 120;
            PingReply reply = pingSender.Send (args[0], timeout, buffer, options);
            if (reply.Status == IPStatus.Success)
            {
                Console.WriteLine ("Address: {0}", reply.Address.ToString ());
                Console.WriteLine ("RoundTrip time: {0}", reply.RoundtripTime);
                Console.WriteLine ("Time to live: {0}", reply.Options.Ttl);
                Console.WriteLine ("Don't fragment: {0}", reply.Options.DontFragment);
                Console.WriteLine ("Buffer size: {0}", reply.Buffer.Length);
            }
        }
    }
}

open System.Net.NetworkInformation
open System.Text

// args[0] can be an IPaddress or host name.
[<EntryPoint>]
let main args =
    let pingSender = new Ping()

    // Use the default Ttl value which is 128,
    // but change the fragmentation behavior.
    let options = PingOptions()
    options.DontFragment <- true

    // Create a buffer of 32 bytes of data to be transmitted.
    let data = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"
    let buffer = Encoding.ASCII.GetBytes data
    let timeout = 120
    let reply: PingReply = pingSender.Send(args.[0], timeout, buffer, options)

    match reply.Status with
    | IPStatus.Success ->
        printfn "Address: %O" reply.Address
        printfn "RoundTrip time: %d" reply.RoundtripTime
        printfn "Time to live: %d" reply.Options.Ttl
        printfn "Don't fragment: %b" reply.Options.DontFragment
        printfn "Buffer size: %d" reply.Buffer.Length
        0
    | _ ->
        eprintfn "Error sending ping: %O" reply
        eprintfn "Error was: %O" reply.Status
        1

Remarks

The Ping class uses the values in this enumeration to set the PingReply.Status property. The Ping class returns PingReply objects when you call the Ping.Send or Ping.SendAsync methods to check whether you can reach a computer across the network.

Warning

The DestinationProhibited and DestinationProtocolUnreachable enumeration values have the same numeric value. This is possible because DestinationProhibited applies only to IPv6 and DestinationProtocolUnreachable applies only to IPv4.

Applies to

Κοινή χρήση μέσω