az hpc-cache

Reference

Note

This reference is part of the hpc-cache extension for the Azure CLI (version 2.3.0 or higher). The extension will automatically install the first time you run an az hpc-cache command. Learn more about extensions.

Commands to manage hpc cache.

Commands

Name	Description	Type	Status
az hpc-cache blob-storage-target	Commands to create hpc cache blob storage target.	Extension	GA
az hpc-cache blob-storage-target add	Create or update a blob Storage Target. This operation is allowed at any time, but if the Cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the Cache is healthy again.	Extension	GA
az hpc-cache blob-storage-target update	Create or update a blob Storage Target. This operation is allowed at any time, but if the Cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the Cache is healthy again.	Extension	GA
az hpc-cache create	Create or update a Cache.	Extension	GA
az hpc-cache delete	Schedule a Cache for deletion.	Extension	GA
az hpc-cache flush	Tell a Cache to write all dirty data to the Storage Target(s). During the flush, clients will see errors returned until the flush is complete.	Extension	GA
az hpc-cache list	Return all Caches the user has access to under a resource group.	Extension	GA
az hpc-cache nfs-storage-target	Commands to create hpc cache nfs storage target.	Extension	GA
az hpc-cache nfs-storage-target add	Create or update a nfs Storage Target. This operation is allowed at any time, but if the Cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the Cache is healthy again.	Extension	GA
az hpc-cache nfs-storage-target update	Create or update a nfs Storage Target. This operation is allowed at any time, but if the Cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the Cache is healthy again.	Extension	GA
az hpc-cache show	Return a Cache.	Extension	GA
az hpc-cache skus	Commands to manage hpc cache skus.	Extension	GA
az hpc-cache skus list	Get the list of StorageCache.Cache SKUs available to this subscription.	Extension	GA
az hpc-cache start	Tell a Stopped state Cache to transition to Active state.	Extension	GA
az hpc-cache stop	Tell an Active Cache to transition to Stopped state.	Extension	GA
az hpc-cache storage-target	Commands to manage hpc cache storage target.	Extension	GA
az hpc-cache storage-target list	Return a list of Storage Targets for the specified Cache.	Extension	GA
az hpc-cache storage-target remove	Remove a Storage Target from a Cache. This operation is allowed at any time, but if the Cache is down or unhealthy, the actual removal of the Storage Target may be delayed until the Cache is healthy again. Note that if the Cache has data to flush to the Storage Target, the data will be flushed before the Storage Target will be deleted.	Extension	GA
az hpc-cache storage-target show	Return a Storage Target from a Cache.	Extension	GA
az hpc-cache update	Update a Cache.	Extension	GA
az hpc-cache upgrade-firmware	Upgrade a Cache's firmware if a new version is available. Otherwise, this operation has no effect.	Extension	GA
az hpc-cache usage-model	Commands to manage hpc cache usage model.	Extension	GA
az hpc-cache usage-model list	Get the list of Cache Usage Models available to this subscription.	Extension	GA
az hpc-cache wait	Wait a hpc Cache to specified state.	Extension	GA

az hpc-cache create

Create or update a Cache.

az hpc-cache create --cache-size-gb
                    --location
                    --name
                    --resource-group
                    --sku-name
                    --subnet
                    [--no-wait]
                    [--tags]

Examples

Caches_CreateOrUpdate

az hpc-cache create --resource-group "scgroup" --name "sc1" --location "eastus" --cache-size-gb "3072" --subnet "/subscriptions/{subscription_id}/resourceGroups/{resource_group}/providers/Microsoft.Network/virtualNetworks/{virtual_network_name}/subnets/{subnet_name}" --sku-name "Standard_2G"

Required Parameters

--cache-size-gb

The size of this Cache, in GB.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--sku-name

SKU name for this Cache.

--subnet

Subnet used for the Cache.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache delete

Schedule a Cache for deletion.

az hpc-cache delete --name
                    --resource-group
                    [--no-wait]

Examples

Caches_Delete

az hpc-cache delete --resource-group "scgroup" --name "sc"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache flush

Tell a Cache to write all dirty data to the Storage Target(s). During the flush, clients will see errors returned until the flush is complete.

az hpc-cache flush --name
                   --resource-group

Examples

Caches_Flush

az hpc-cache flush --resource-group "scgroup" --name "sc"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache list

Return all Caches the user has access to under a resource group.

az hpc-cache list [--resource-group]

Examples

Caches_List

az hpc-cache list

Caches_ListByResourceGroup

az hpc-cache list --resource-group "scgroup"

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache show

Return a Cache.

az hpc-cache show --name
                  --resource-group

Examples

Caches_Get

az hpc-cache show --resource-group "scgroup" --name "sc1"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache start

Tell a Stopped state Cache to transition to Active state.

az hpc-cache start --name
                   --resource-group
                   [--no-wait]

Examples

Caches_Start

az hpc-cache start --resource-group "scgroup" --name "sc"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache stop

Tell an Active Cache to transition to Stopped state.

az hpc-cache stop --name
                  --resource-group
                  [--no-wait]

Examples

Caches_Stop

az hpc-cache stop --resource-group "scgroup" --name "sc"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache update

Update a Cache.

az hpc-cache update --name
                    --resource-group
                    [--cache-size-gb]
                    [--location]
                    [--sku-name]
                    [--subnet]
                    [--tags]

Examples

Caches_Update

az hpc-cache update --resource-group "scgroup" --name "sc1" --tags "key=val"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--cache-size-gb

Deprecated

Argument 'cache_size_gb' has been deprecated and will be removed in a future release.

The size of this Cache, in GB.

--location -l

Deprecated

Argument 'location' has been deprecated and will be removed in a future release.

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--sku-name

Deprecated

Argument 'sku_name' has been deprecated and will be removed in a future release.

SKU name for this Cache.

--subnet

Deprecated

Argument 'subnet' has been deprecated and will be removed in a future release.

Subnet used for the Cache.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache upgrade-firmware

Upgrade a Cache's firmware if a new version is available. Otherwise, this operation has no effect.

az hpc-cache upgrade-firmware --name
                              --resource-group

Examples

Caches_UpgradeFirmware

az hpc-cache upgrade-firmware --resource-group "scgroup" --name "sc"

Required Parameters

--name

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az hpc-cache wait

Wait a hpc Cache to specified state.

az hpc-cache wait --name
                  --resource-group
                  [--created]
                  [--custom]
                  [--deleted]
                  [--exists]
                  [--interval]
                  [--timeout]
                  [--updated]

Examples

Caches_Wait

az hpc-cache wait --resource-group "scgroup" --name "sc" --created

Required Parameters

--name -n

Name of Cache.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False

--exists

Wait until the resource exists.

Default value: False

--interval

Polling interval in seconds.

Default value: 30

--timeout

Maximum wait in seconds.

Default value: 3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Κοινή χρήση μέσω

az hpc-cache

Commands

az hpc-cache create

Examples

Required Parameters

Optional Parameters

az hpc-cache delete

Examples

Required Parameters

Optional Parameters

az hpc-cache flush

Examples

Required Parameters

az hpc-cache list

Examples

Optional Parameters

az hpc-cache show

Examples

Required Parameters

az hpc-cache start

Examples

Required Parameters

Optional Parameters

az hpc-cache stop

Examples

Required Parameters

Optional Parameters

az hpc-cache update

Examples

Required Parameters

Optional Parameters

az hpc-cache upgrade-firmware

Examples

Required Parameters

az hpc-cache wait

Examples

Required Parameters

Optional Parameters

Πρόσθετοι πόροι