Add and manage app attach and MSIX app attach applications in Azure Virtual Desktop

Tip

A new version of app attach for Azure Virtual Desktop is available. Select a button at the top of this article to choose between app attach and MSIX app attach to see the relevant documentation.

App attach enables you to dynamically attach applications from an application package to a user session in Azure Virtual Desktop. Applications aren't installed locally on session hosts or images, enabling you to create fewer custom images for your session hosts, and reducing operational overhead and costs for your organization. Delivering applications with app attach also gives you greater control over which applications your users can access in a remote session.

MSIX app attach enables you to dynamically attach applications from an application package to a user session in Azure Virtual Desktop. Applications aren't installed locally on session hosts or images, making it easier to create custom images for your session hosts, and reducing operational overhead and costs for your organization. Delivering applications with MSIX app attach also gives you greater control over which applications your users can access in a remote session.

This article shows you how to add and manage applications with app attach in Azure Virtual Desktop using the Azure portal and Azure PowerShell. You can't add or manage app attach applications using Azure CLI. Before you start, make sure you read the overview for app attach and MSIX app attach in Azure Virtual Desktop.

This article shows you how to add and manage MSIX packages with MSIX app attach in Azure Virtual Desktop using the Azure portal and Azure PowerShell. You can't add or manage MSIX app attach applications using Azure CLI. Before you start, make sure you read the overview for app attach and MSIX app attach in Azure Virtual Desktop.

Important

You have to choose whether you want to use app attach or MSIX app attach with a host pool. You can't use both versions with the same host pool.

Prerequisites

In order to use app attach in Azure Virtual Desktop, you need the following things:

In order to use MSIX app attach in Azure Virtual Desktop, you need to meet the prerequisites:

• An existing host pool with session hosts, an application group, and a workspace.

• Your session hosts need to run a supported Windows client operating system and at least one of them must be powered on. Windows Server isn't supported.

• Your session hosts need to be joined to Microsoft Entra ID or an Active Directory Domain Services (AD DS) domain.

• Your session hosts need to be joined to an Active Directory Domain Services (AD DS) domain. Microsoft Entra ID isn't supported.

• User accounts need to be hybrid accounts (created in AD DS and synchronized to Microsoft Entra ID). Groups can be hybrid or Microsoft Entra ID groups.

• An SMB file share in the same Azure region as your session hosts. All session hosts in the host pool must have read access with their computer account. This file share is used to store your application images. For more information on the requirements for the file share, see File share.

• To use Azure Files when your session hosts joined to Microsoft Entra ID, you need to assign the Reader and Data Access Azure role-based access control (RBAC) role to both the Azure Virtual Desktop and Azure Virtual Desktop ARM Provider service principals. This RBAC role assignment allows your session hosts to access the storage account using access keys or Microsoft Entra.

• To learn how to assign an Azure RBAC role to the Azure Virtual Desktop service principals, see Assign RBAC roles to the Azure Virtual Desktop service principals. In a future update, you won't need to assign the Azure Virtual Desktop ARM Provider service principal.

• An SMB file share in the same Azure region as your session hosts. All session hosts in the host pool must have read access with their computer account. This file share is used to store your application images. For more information on the requirements for the file share, see File share.

• An MSIX or Appx disk image that you created from an application package or an App-V package stored on the file share. For more information, see Create an image, where you can also download a prebuilt MSIX package for testing. If using App-V, see Creating and managing App-V virtualized applications.

• An MSIX image that you created from an application package and stored on the file share. For more information, see Create an image, where you can also download a prebuilt MSIX package for testing.

• To add MSIX images, you need the Desktop Virtualization Contributor Azure role-based access control (RBAC) role assigned on the resource group as a minimum. To assign users to the application group, you also need Microsoft.Authorization/roleAssignments/write permissions on the application group. Built-in RBAC roles that include this permission are User Access Administrator and Owner.

• If you want to use Azure PowerShell locally, see Use Azure PowerShell with Azure Virtual Desktop to make sure you have the Az.DesktopVirtualization and Microsoft Graph PowerShell modules installed. Alternatively, use the Azure Cloud Shell.

• You need to use version 4.2.1 of the Az.DesktopVirtualization PowerShell module, which contains the cmdlets that support app attach. You can download and install the Az.DesktopVirtualization PowerShell module from the PowerShell Gallery.

Important

• All MSIX and Appx application packages include a certificate. You're responsible for making sure the certificates are trusted in your environment. Self-signed certificates are supported with the appropriate chain of trust.

• You have to choose whether you want to use app attach or MSIX app attach with a host pool. You can't use both versions with the same package in the same host pool.

Important

All MSIX application packages include a certificate. You're responsible for making sure the certificates are trusted in your environment. Self-signed certificates are supported with the appropriate chain of trust.

Add an application

To add an application in an MSIX image, Appx image, or App-V package to Azure Virtual Desktop as an app attach package, select the relevant tab for your scenario and follow the steps.

Portal

Here's how to add an MSIX image, Appx image, or App-V package as an app attach package using the Azure portal:

1. Sign in to the Azure portal.

2. In the search bar, type Azure Virtual Desktop and select the matching service entry to go to the Azure Virtual Desktop overview.

3. Select App attach, then select + Create.

4. On the Basics tab, complete the following information:

   Parameter	Description
   Subscription	Select the subscription you want to add an MSIX image, Appx image, or App-V package to from the drop-down list.
   Resource group	Select an existing resource group or select Create new and enter a name.
   Host pool	Select an existing host pool from the drop-down list.
   Location	Select the Azure region for your app attach package.

   Once you've completed this tab, select Next.

5. On the Image path tab, complete the following information:

   Parameter	Description
   Image path	Select from Select from storage account if your image is stored in Azure Files or Input UNC to specify a UNC path. Subsequent fields depend on which option you select.
   Select from storage account
   Storage account	Select the storage account your image is in.
   File share	Select Select a file, then browse to the file share and directory your image is in. Check the box next to the image you want to add, for example MyApp.cim, then select Select.
   MSIX package	Select the MSIX or Appx package from the image.
   Input UNC
   UNC	Enter the UNC path to your image file.
   MSIX package	Select the MSIX or Appx package from the image.
   Either option
   Display name	Enter a friendly name for your application.
   Version	Check the expected version number is shown.
   Registration type	Select the registration type you want to use.
   State	Select the initial state for the package.
   Health check status on failure	Select the status for the package if it fails to stage on a session host. This status is reported for AppAttachHealthCheck for the session host health check status.

   Once you've completed this tab, select Next.

   Tip

   Once you've completed this tab, you can continue to optionally assign the application to host pools, users and groups. Alternatively, if you want to configure assignments separately, select Review + create, then go to Assign an app attach package.

6. Optional: On the Assignments tab, complete the following information:

   1. For Host pool, select which host pools you want to assign the application to. If you're already using MSIX app attach with a host pool, you can't select that host pool as you can't use both versions of app attach with the same host pool.

   2. Select Add users or user groups, then search for and select the users or groups you want to assign the application to. Once you have finished, select Select.

   3. Review the assignments you added, then select Next.

7. Optional: On the Tags tab, you can enter any name/value pairs you need, then select Review + create.

8. On the Review + create tab, ensure validation passes and review the information that is used during deployment, then select Create to add the application.

Azure PowerShell

Here's how to add an MSIX image, Appx image, or App-V package as an app attach package using the Az.DesktopVirtualization PowerShell module. Be sure to change the <placeholder> values for your own.

1. Open Azure Cloud Shell in the Azure portal with the PowerShell terminal type, or run PowerShell on your local device.

   • If you're using Cloud Shell, make sure your Azure context is set to the subscription that you want to use.

   • If you're using PowerShell locally, first sign in with Azure PowerShell, and then make sure your Azure context is set to the subscription that you want to use.

2. During the preview, check that you have the PowerShell cmdlets available by running the following commands:

   Import-Module Az.DesktopVirtualization
   Get-Command -Module Az.DesktopVirtualization -Noun "*AppAttach*"
   

   Your output should be similar to the following output:

   CommandType     Name                                               Version    Source
   -----------     ----                                               -------    ------
   Function        Get-AzWvdAppAttachPackage                          4.2.1      Az.DesktopVirtualization
   Function        Import-AzWvdAppAttachPackageInfo                   4.2.1      Az.DesktopVirtualization
   Function        New-AzWvdAppAttachPackage                          4.2.1      Az.DesktopVirtualization
   Function        Remove-AzWvdAppAttachPackage                       4.2.1      Az.DesktopVirtualization
   Function        Update-AzWvdAppAttachPackage                       4.2.1      Az.DesktopVirtualization
   

3. Get the properties of the MSIX image, Appx image, or App-V package you want to add and store them in a variable by running the following command. You need to specify a host pool, but it can be any host pool where session hosts have access to the file share.

   # Get the properties of the MSIX image, Appx image, or App-V package
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Path = '<UNCPathToFile>'
   }
   
   $app = Import-AzWvdAppAttachPackageInfo @parameters
   

4. Check you only have one object in the application properties by running the following commands:

   $app | FL *
   

   Optional: if you have more than one object in the output, for example an x64 and an x86 version of the same application, you can use the parameter PackageFullName to specify which application you want to add by running the following commands:

   # Specify the package full name
   $packageFullName = '<PackageFullName>'
   
   # Get the properties of the application
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Path = '<UNCPathToFile>'
   }
   
   $app = Import-AzWvdAppAttachPackageInfo @parameters | ? ImagePackageFullName -like *$packageFullName*
   

5. Add the image or package as an app attach package by running the following command. In this example, the application state is marked as active, the application registration is set to on-demand, and session host health check status on failure is set to NeedsAssistance:

   $parameters = @{
       Name = '<AppName>'
       ResourceGroupName = '<ResourceGroupName>'
       Location = '<AzureRegion>'
       FailHealthCheckOnStagingFailure = 'NeedsAssistance'
       ImageIsRegularRegistration = $false
       ImageDisplayName = '<AppDisplayName>'
       ImageIsActive = $true
   }
   
   New-AzWvdAppAttachPackage -AppAttachPackage $app @parameters
   

   There's no output when the package is added successfully.

6. You can verify the package is added by running the following commands:

   $parameters = @{
       Name = '<AppName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Get-AzWvdAppAttachPackage @parameters | FL Name, ImagePackageApplication, ImagePackageFamilyName, ImagePath, ImageVersion, ImageIsActive, ImageIsRegularRegistration, SystemDataCreatedAt
   

   The output should be similar to the following example:

   Name                       : My App
   ImagePackageApplication    : {MyApp}
   ImagePackageFamilyName     : MyApp_abcdef123ghij
   ImagePath                  : \\fileshare\Apps\MyApp\MyApp.cim
   ImageVersion               : 1.0.0.0
   ImageIsActive              : True
   ImageIsRegularRegistration : True
   SystemDataCreatedAt        : 7/31/2023 3:03:43 PM
   

Assign an app attach package

You need to assign an app attach package to host pools as well as groups and users. Select the relevant tab for your scenario and follow the steps.

Note

User accounts need to be hybrid accounts (created in AD DS and synchronized to Azure AD), but groups do not.

Portal

Here's how to assign an application package to host pools, users and groups using the Azure portal:

Host pools

1. From the Azure Virtual Desktop overview, select App attach, then select the name of the app attach package you want to assign.

2. In the section Manage, select Host pools:

3. Select + Assign, then select one or more host pools from the drop-down list. Make sure that all session hosts in the host pool must have read access with their computer account, as listed in the prerequisites.

4. Select Add.

Groups and users

1. From the Azure Virtual Desktop overview, select App attach, then select the name of the app attach package you want to assign.

2. In the section Manage, select Users:

3. Select + Add, then select one or more groups and/or users from the list.

4. Select Select.

Azure PowerShell

Here's how to assign an application package to host pools as well as groups and users using the Az.DesktopVirtualization PowerShell module.

Host pools

Important

The host pool IDs you specify each time will overwrite any existing assignments. If you want to add or remove a host pool to or from an existing list of host pools, you need to specify all the host pools you want to assign the application to.

1. In the same PowerShell session, get the resource IDs of the host pool(s) you want to assign the application to and add them to an array to by running the following commands:

   # Add a comma-separated list of host pools names
   $hostPoolNames = "<HostPoolName1>","<HostPoolName2>"
   
   # Create an array and add the resource ID for each host pool
   $hostPoolIds = @()
   foreach ($hostPoolName in $HostPoolNames) {
       $hostPoolIds += (Get-AzWvdHostPool | ? Name -eq $hostPoolName).Id
   }
   

2. Once you have the resource IDs of the host pool(s), you can assign the application package to them by running the following commands:

   $parameters = @{
       Name = '<AppName>'
       ResourceGroupName = '<ResourceGroupName>'
       Location = '<AzureRegion>'
       HostPoolReference = $hostPoolIds
   }
   
   Update-AzWvdAppAttachPackage @parameters
   

3. To unassign the application package from all host pools, you can pass an empty array of host pools by running the following commands:

   $parameters = @{
       Name = '<AppName>'
       ResourceGroupName = '<ResourceGroupName>'
       Location = '<AzureRegion>'
       HostPoolReference = @()
   }
   
   Update-AzWvdAppAttachPackage @parameters
   

Groups and users

Here's how to assign an application to groups and users using the Az.DesktopVirtualization PowerShell module.

1. Get the object ID of the groups or users you want to add to or remove from the application and add them to an array to by using one of the following examples. We recommend you assign applications to groups.

   1. Get the object ID of the group or groups and add them to an array to by running the following commands. This example uses the group display name:

      # Add a comma-separated list of group names
      $groups = "Group1","Group2"
      
      # Connect to Microsoft Graph
      Connect-MgGraph -Scopes 'Group.Read.All'
      
      # Create an array and add the ID for each group
      $Ids = @()
      
      foreach ($group in $groups) {
         $Ids += (Get-MgGroup | ? DisplayName -eq $group).Id
      }
      

   2. Get the object ID of the user(s) and add them to an array to by running the following commands. This example uses the user principal name (UPN):

      # Add a comma-separated list of user principal names
      $users = "user1@contoso.com","user2@contoso.com"
      
      # Connect to Azure AD
      Connect-MgGraph -Scopes 'User.Read.All'
      
      # Create an array and add the ID for each user
      $userIds = @()
      
      foreach ($user in $users) {
          $userIds += (Get-MgUser | ? UserPrincipalName -eq $user).Id
      }
      

2. Once you have the object IDs of the users or groups, you can add them to or remove them from the application by using one of the following examples, which assigns the Desktop Virtualization User RBAC role.

   1. To add the groups or users to the application, run the following commands:

      $parameters = @{
         Name = '<AppName>'
         ResourceGroupName = '<ResourceGroupName>'
      }
      
      $appAttachPackage = Get-AzWvdAppAttachPackage @parameters
      
      foreach ($userId in $userIds) {
         New-AzRoleAssignment -ObjectId $userId -RoleDefinitionName "Desktop Virtualization User" -Scope $appAttachPackage.Id
      }
      

   2. To remove the groups or users to the application, run the following commands:

      $parameters = @{
         Name = '<AppName>'
         ResourceGroupName = '<ResourceGroupName>'
      }
      
      $appAttachPackage = Get-AzWvdAppAttachPackage @parameters
      
      foreach ($userId in $userIds) {
         Remove-AzRoleAssignment -ObjectId $userId -RoleDefinitionName "Desktop Virtualization User" -Scope $appAttachPackage.Id
      }
      

Note

Adding a package, setting it to active, and assigning it to a host pool and users automatically makes the application available in a desktop session. If you want to use RemoteApp, you'll need to add the application to a RemoteApp application group. For more information, see Publish an MSIX or Appx application with a RemoteApp application group. You can't add MSIX or Appx applications to the desktop application group with app attach.

Change registration type and state

You can manage your MSIX and Appx packages by changing their registration type and state. Select the relevant tab for your scenario and follow the steps.

Portal

Here's how to change a package's registration type and state using the Azure portal:

1. From the Azure Virtual Desktop overview, select App attach. You should see a list of all existing packages within the host pool.

2. Select the name of the package you want to change.

   1. To change the registration type, select On-demand or Register at log on, then select Save.

   2. To change the state, select Inactive or Active, then select Save.

Azure PowerShell

Here's how to change a package's registration type and state using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, you can change the registration type and state by running the following commands:

   1. Change the registration type by running the following command. Set IsRegularRegistration to $true for Register at log on or $false for On-demand.

      $parameters = @{
          Name = '<Name>'
          ResourceGroupName = '<ResourceGroupName>'
          Location = '<AzureRegion>'
          IsRegularRegistration = $true
      }
      
      Update-AzWvdAppAttachPackage @parameters
      

   2. Change the state by running the following command. Set IsActive to $true for Active or $false for Inactive.

      $parameters = @{
          Name = '<Name>'
          ResourceGroupName = '<ResourceGroupName>'
          Location = '<AzureRegion>'
          IsActive = $true
      }
      
      Update-AzWvdAppAttachPackage @parameters
      

Publish an MSIX or Appx application with a RemoteApp application group

You can make MSIX and Appx applications available to users by publishing them with a RemoteApp application group. You don't need to add applications to a desktop application group when using app attach as you only need to Assign an app attach package. The application you want to publish must be assigned to a host pool.

Portal

Here's how to add an application from the package you added in this article to a RemoteApp application group using the Azure portal:

1. From the Azure Virtual Desktop overview, select Application groups, then select the RemoteApp application group you want to add an application to.

2. Select Applications, select + Add. Make sure you have at least one session host powered on in the host pool the application group is assigned to.

3. On the Basics tab, complete the following information:

   Parameter	Value/Description
   Application source	Select App Attach from the drop-down list. If you want to add applications from the Start menu or by specifying a file path, see Publish applications with RemoteApp.
   Package	Select a package available for the host pool from the drop-down list. Regional packages are from app attach.
   Application	Select an application from the drop-down list.
   Application identifier	Enter a unique identifier for the application.
   Display name	Enter a friendly name for the application that is to users.
   Description	Enter a description for the application.

   Once you've completed this tab, select Next.

4. On the Icon tab, select Default to use the default icon for the application, or select File path to use a custom icon. For File path, select one of the following options:

   • Browse Azure Files to use an icon from an Azure file share. Select Select a storage account and select the storage account containing your icon file, then select Select icon file. Browse to the file share and directory your icon is in, check the box next to the icon you want to add, for example MyApp.ico, then select Select. You can also use a .png file. For Icon index, specify the index number for the icon you want to use. This number is usually 0.

   • UNC file path to use an icon from a file share. For Icon path, enter the UNC path to your icon file, for example \\MyFileShare\MyApp.ico. You can also use a .png file. For Icon index, specify the index number for the icon you want to use. This number is usually 0.

   Once you've completed this tab, select Review + add.

5. On the Review + add tab, ensure validation passes and review the information that is used to add the application, then select Add to add the application to the RemoteApp application group.

Azure PowerShell

Here's how to add an application from the package you added in this article to a RemoteApp application group using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, if there are multiple applications in the package, you need to get the application ID of the application you want to add from the package by running the following commands:

   Write-Host "These are the application IDs available in the package. Many packages only contain one application." -ForegroundColor Yellow
   $app.ImagePackageApplication.AppId
   

2. Make a note of the application ID you want to publish (for example App), then run the following commands to add the application to the RemoteApp application group:

   $parameters = @{
       Name = '<ApplicationName>'
       ApplicationType = 'MsixApplication'
       MsixPackageFamilyName = $app.ImagePackageFamilyName
       MsixPackageApplicationId = '<ApplicationID>'
       GroupName = '<ApplicationGroupName>'
       ResourceGroupName = '<ResourceGroupName>'
       CommandLineSetting = 'DoNotAllow'
   }
   
   New-AzWvdApplication @parameters
   

3. Verify the list of applications in the application group by running the following commands:

   $parameters = @{
       GroupName = '<ApplicationGroupName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Get-AzWvdApplication @parameters
   

Update an existing package

You can update an existing package by supplying a new MSIX image, Appx image, or App-V package containing the updated application. For more information, see New versions of applications.

To update an existing package in-place, select the relevant tab for your scenario and follow the steps.

Portal

Here's how to update an existing package using the Azure portal:

1. From the Azure Virtual Desktop overview, select App attach. You should see a list of all existing packages.

2. Select the package you want to update, then from the overview, select Update.

3. Enter the information for the updated package:

   1. Subscription and Resource group are prepopulated with the values for the current package.

   2. Select the Host pool for which you want to update the package.

   3. Select the image path from Select from storage account or Input UNC. Subsequent fields depend on which option you select.

      1. For Select from storage account, select the Storage account containing the updated image. Select Select a file, then browse to the file share and directory your image is in. Check the box next to the image you want to add, for example MyApp.cim, then select Select.
      2. For Input UNC, enter the UNC path to your image file.

   4. For MSIX package, select the MSIX or Appx package from the image.

4. Once you've completed the fields, select Update.

Azure PowerShell

Here's how to update an existing package using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, get the properties of the updated application and store them in a variable by running the following commands:

   # Get the properties of the application
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Path = '<UNCPathToFile>'
   }
   
   $app = Import-AzWvdAppAttachPackageInfo @parameters
   

2. Check you only have one object in the application properties by running the following commands:

   $app | FL *
   

   If you have more than one object in the output, for example an x64 and an x86 version of the same application, you can use the parameter PackageFullName to specify which one you want to add by running the following commands:

   # Specify the package full name
   $packageFullName = '<PackageFullName>'
   
   # Get the properties of the application
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Path = '<UNCPathToFile>'
   }
   
   $app = Import-AzWvdAppAttachPackageInfo @parameters | ? ImagePackageFullName -like *$packageFullName*
   

3. Update an existing package by running the following command. The new disk image supersedes the existing one, but existing assignments are kept. Don't delete the existing image until users have stopped using it.

   $parameters = @{
       Name = '<PackageName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Update-AzWvdAppAttachPackage -AppAttachPackage $app @parameters
   

Remove an app attach package

You can remove an app attach package that you no longer need. You don't need to unassign host pools or users and groups first. Select the relevant tab for your scenario and follow the steps.

Tip

You can also remove an application in an MSIX package published as a RemoteApp from an application group the same way as other application types. For more information, see Remove applications.

Portal

Here's how to remove an app attach package using the Azure portal:

1. From the Azure Virtual Desktop overview, select App attach. You should see a list of all existing packages.

2. Check the box next to the name of the package you want to remove, then select Remove. The package is also removed from any host pools it's assigned to.

Azure PowerShell

Here's how to remove an app attach package using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, run the following command to remove the package containing an application:

   $parameters = @{
       Name = '<PackageName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Remove-AzWvdAppAttachPackage @parameters
   

Add an MSIX image to a host pool

To add an MSIX image to a host pool, select the relevant tab for your scenario and follow the steps.

Portal

Here's how to add an MSIX image using the Azure portal:

1. Sign in to the Azure portal.

2. In the search bar, type Azure Virtual Desktop and select the matching service entry to go to the Azure Virtual Desktop overview.

3. Select Host pools, then select the name of the host pool you want to add an MSIX image to.

4. From the host pool overview, select MSIX packages, then select + Add.

5. For MSIX image path, enter a valid UNC path pointing to the MSIX image on the file share, for example, \\fileshare\Apps\MyApp\MyApp.cim, then select Add, which checks the path is valid.

6. Once the path has been verified, more fields appear. Complete the following information:

   Parameter	Description
   MSIX package	Select the relevant MSIX package name from the drop-down menu.
   Package applications	This shows App and isn't configurable.
   Display name	Enter a friendly name for your package.
   Version	Check the expected version number is shown.
   Registration type	Select the registration type you want to use.
   State	Select the initial state for the package.

7. Once you've completed the fields, select Add.

Azure PowerShell

Here's how to add an MSIX package using the Az.DesktopVirtualization PowerShell module. Be sure to change the <placeholder> values for your own.

1. Open Azure Cloud Shell in the Azure portal with the PowerShell terminal type, or run PowerShell on your local device.

   • If you're using Cloud Shell, make sure your Azure context is set to the subscription that you want to use.

   • If you're using PowerShell locally, first sign in with Azure PowerShell, and then make sure your Azure context is set to the subscription that you want to use.

2. Get the properties of the application in the MSIX image you want to add and store them in a variable by running the following commands:

   # Get the properties of the MSIX image
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Uri = '<UNCaPathToFile>'
   }
   
   $app = Expand-AzWvdMsixImage @parameters
   

   The output should be similar to the following example:

   Name
   ----
   hp01/expandmsiximage
   

3. Check you only have one object in the application properties by running the following commands:

   $app | FL *
   

   If you have more than one object in the output, for example an x64 and an x86 version of the same application, you can use the parameter PackageFullName to specify which one you want to add by running the following commands:

   # Specify the package full name
   $packageFullName = '<PackageFullName>'
   
   # Get the properties of the application
   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       Uri = '<UNCPathToFile>'
   }
   
   $app = Expand-AzWvdMsixImage @parameters | ? PackageFullName -like *$packageFullName*
   

4. Add the MSIX image to a host pool by running the following command. In this example, the application state is marked as active.

   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
       PackageAlias = $app.PackageAlias
       DisplayName = '<DisplayName>'
       ImagePath = $app.ImagePath
       IsActive = $true
   }
   
   New-AzWvdMsixPackage @parameters
   

   There's no output when the MSIX package is added successfully.

5. You can verify the MSIX package is added by running the following commands:

   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Get-AzWvdMsixPackage @parameters | ? PackageFamilyName -eq $app.PackageFamilyName | FL *
   

   The output should be similar to the following example:

   DisplayName                  : My App
   Id                           : /subscriptions/aaaa0a0a-bb1b-cc2c-dd3d-eeeeee4e4e4e/resourcegroups/avd/providers/Microsoft.DesktopVirtualization/hostpools/hp01/msixpackages/MyApp_1.0.0.0_neutral__abcdef123ghij
   ImagePath                    : \\fileshare\Apps\MyApp\MyApp.cim
   IsActive                     : True
   IsRegularRegistration        : False
   LastUpdated                  : 7/27/2023 10:02:29 AM
   Name                         : hp01/MyApp_1.0.0.0_neutral__abcdef123ghij
   PackageApplication           : {MyApp}
   PackageDependency            : {}
   PackageFamilyName            : MyApp_abcdef123ghij
   PackageName                  : MyApp
   PackageRelativePath          : apps\MyApp_1.0.0.0_neutral__abcdef123ghij
   SystemDataCreatedAt          : 7/28/2023 9:04:00 AM
   SystemDataCreatedBy          : avdadmin@contoso.com
   SystemDataCreatedByType      : User
   SystemDataLastModifiedAt     : 7/28/2023 9:04:00 AM
   SystemDataLastModifiedBy     : avdadmin@contoso.com
   SystemDataLastModifiedByType : User
   Type                         : Microsoft.DesktopVirtualization/hostpools/msixpackages
   Version                      : 1.0.0.0
   

Change registration type and state

You can manage MSIX packages in your host pool by changing their registration type and state. Select the relevant tab for your scenario and follow the steps.

Portal

Here's how to change a package's registration type and state using the Azure portal:

1. From the Azure Virtual Desktop overview, select Host pools, then select the name of the host pool the MSIX package is added to.

2. From the host pool overview, select MSIX packages. You should see a list of all existing MSIX packages within the host pool.

3. Select the name of the MSIX package you want to change.

   1. To change the registration type, select On-demand or Register at log on, then select Save.

   2. To change the state, select Inactive or Active, then select Save.

Azure PowerShell

Here's how to change a package's registration type and state using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, get a list of MSIX packages on a host pool and their current registration type and state by running the following commands:

   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Get-AzWvdMsixPackage @parameters | Select-Object DisplayName, ImagePath, Name, Version, IsRegularRegistration, IsActive
   

   The output should be similar to the following example:

   DisplayName ImagePath                        Name                                      Version IsRegularRegistration IsActive
   ----------- ---------                        -----------------                         ------- --------------------- --------
   My App      \\fileshare\Apps\MyApp\MyApp.cim hp01/MyApp_1.0.0.0_neutral__abcdef123ghij 1.0.0.0                 False     True
   

2. Find the package you want to remove and use the value for the Name parameter, but remove the host pool name and / from the start. For example, hp01/MyApp_1.0.0.0_neutral__abcdef123ghij becomes MyApp_1.0.0.0_neutral__abcdef123ghij. Here are a couple of examples.

   1. Change the registration type by running the following command. Set IsRegularRegistration to $true for Register at log on or $false for On-demand.

      $parameters = @{
          FullName = '<FullName>'
          HostPoolName = '<HostPoolName>'
          ResourceGroupName = '<ResourceGroupName>'
          IsRegularRegistration = $true
      }
      
      Update-AzWvdMsixPackage @parameters
      

   2. Change the state by running the following command. Set IsActive to $true for Active or $false for Inactive.

      $parameters = @{
          FullName = '<FullName>'
          HostPoolName = '<HostPoolName>'
          ResourceGroupName = '<ResourceGroupName>'
          IsActive = $true
      }
      
      Update-AzWvdMsixPackage @parameters
      

Publish an MSIX application

You can make MSIX applications available to users as part of a desktop or RemoteApp application group. A desktop application group makes the applications available in a user's start menu, whereas a RemoteApp application group means a user can stream them individually. For more information about application groups, see Terminology. Select the relevant tab for your scenario and follow the steps.

Portal

Here's how to add an application from the package you added in this article to a RemoteApp application group using the Azure portal:

1. From the Azure Virtual Desktop overview, select Application groups, then select the Desktop or RemoteApp application group you want to add an application to.

2. Select Applications, select + Add. Make sure you have at least one session host powered on in the host pool the application group is assigned to.

3. On the Basics tab, the options you see depend on whether your application group is for a Desktop or a RemoteApp:

   1. For a Desktop application group, complete the following information:

      Parameter	Value/Description
      Application source	MSIX package is automatically selected and greyed out.
      Package	Select a package available for the host pool from the drop-down list.
      Application identifier	Enter a unique identifier for the application.
      Display name	Enter a friendly name for the application that is to users.
      Description	Enter a description for the application.

      Once you've completed this tab, select Review + add.

   2. For a RemoteApp application group, complete the following information:

      Parameter	Value/Description
      Application source	Select App Attach from the drop-down list. If you want to add applications from the Start menu or by specifying a file path, see Publish applications with RemoteApp.
      Package	Select a package available for the host pool from the drop-down list. Host pool packages are from MSIX app attach.
      Application	Select an application from the drop-down list.
      Application identifier	Enter a unique identifier for the application.
      Display name	Enter a friendly name for the application that is to users.
      Description	Enter a description for the application.

      Once you've completed this tab, select Next.

      On the Icon tab, select Default to use the default icon for the application, or select File path to use a custom icon. For File path, select one of the following options:

      • Browse Azure Files to use an icon from an Azure file share. Select Select a storage account and select the storage account containing your icon file, then select Select icon file. Browse to the file share and directory your icon is in, check the box next to the icon you want to add, for example MyApp.ico, then select Select. You can also use a .png file. For Icon index, specify the index number for the icon you want to use. This number is usually 0.

      • UNC file path to use an icon from a file share. For Icon path, enter the UNC path to your icon file, for example \\MyFileShare\MyApp.ico. You can also use a .png file. For Icon index, specify the index number for the icon you want to use. This number is usually 0.

      Once you've completed this tab, select Review + add.

4. On the Review + add tab, ensure validation passes and review the information that is used to add the application, then select Add to add the application to the application group.

Azure PowerShell

Here's how to add MSIX applications to an application group using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, add an MSIX application to an application group by running the commands in one of the following examples.

   1. To add an MSIX application to a desktop application group, run the following commands:

      $parameters = {
          Name = '<ApplicationName>'
          ApplicationType = 'MsixApplication'
          MsixPackageFamilyName = $app.PackageFamilyName
          GroupName = '<ApplicationGroupName>'
          ResourceGroupName = '<ResourceGroupName>'
          CommandLineSetting = 'DoNotAllow'
      }
      
      New-AzWvdApplication @parameters
      

   2. To add an MSIX application to a RemoteApp application group, if there are multiple applications in the package, you need to get the application ID of the application you want to add from the package by running the following commands:

      Write-Host "These are the application IDs available in the package. Many packages only contain one application." -ForegroundColor Yellow
      $app.ImagePackageApplication.AppId
      

      Make a note of the application ID you want to publish (for example App), then run the following commands to add the application to the RemoteApp application group:

      $parameters = @{
          Name = '<ApplicationName>'
          ApplicationType = 'MsixApplication'
          MsixPackageFamilyName = $app.PackageFamilyName
          MsixPackageApplicationId = '<ApplicationID>'
          GroupName = '<ApplicationGroupName>'
          ResourceGroupName = '<ResourceGroupName>'
          CommandLineSetting = 'DoNotAllow'
      }
      
      New-AzWvdApplication @parameters
      

      Verify the list of applications in the application group by running the following commands:

      $parameters = @{
          GroupName = '<ApplicationGroupName>'
          ResourceGroupName = '<ResourceGroupName>'
      }
      
      Get-AzWvdApplication @parameters
      

Remove an MSIX package

You can remove an MSIX package that you no longer need. Select the relevant tab for your scenario and follow the steps.

Tip

You can also remove only an application in an MSIX package from an application group the same way as other application types. For more information, see Remove applications.

Portal

Here's how to remove an MSIX package from your host pool using the Azure portal:

1. From the Azure Virtual Desktop overview, select Host pools, then select the name of the host pool the MSIX package is added to.

2. From the host pool overview, select MSIX packages. You should see a list of all existing MSIX packages within the host pool.

3. Check the box next to the name of the MSIX package you want to remove, then select Remove.

Azure PowerShell

Here's how to remove applications using the Az.DesktopVirtualization PowerShell module.

1. In the same PowerShell session, get a list of MSIX packages on a host pool by running the following commands:

   $parameters = @{
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Get-AzWvdMsixPackage @parameters | Select-Object DisplayName, ImagePath, PackageFamilyName, Version
   

   The output should be similar to the following example:

   DisplayName ImagePath                        Name                                      Version
   ----------- ---------                        -----------------                         -------
   My App      \\fileshare\Apps\MyApp\MyApp.cim hp01/MyApp_1.0.0.0_neutral__abcdef123ghij 1.0.0.0
   

2. Find the package you want to remove and use the value for the Name parameter, but remove the host pool name and / from the start. For example, hp01/MyApp_1.0.0.0_neutral__abcdef123ghij becomes MyApp_1.0.0.0_neutral__abcdef123ghij. Then remove the package by running the following commands:

   $parameters = @{
       FullName = '<FullName>'
       HostPoolName = '<HostPoolName>'
       ResourceGroupName = '<ResourceGroupName>'
   }
   
   Remove-AzWvdMsixPackage @parameters
   

Disable automatic updates

We recommend that you disable automatic updates for MSIX and Appx applications. To disable automatic updates, you need set the following registry values on your session hosts:

We recommend that you disable automatic updates for MSIX applications. To disable automatic updates, you need set the following registry values on your session hosts:

• Key: HKLM\Software\Policies\Microsoft\WindowsStore

  • Type: DWORD
  • Name: AutoDownload
  • Value: 2
  • Description: Disables Microsoft Store automatic update.

• Key: HKCU\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager

  • Type: DWORD
  • Name: PreInstalledAppsEnabled
  • Value: 0
  • Description: Disables content delivery automatic download.

• Key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager\Debug

  • Type: DWORD
  • Name: ContentDeliveryAllowedOverride
  • Value: 2
  • Description: Disables content delivery automatic download.

You can set these registry values using Group Policy or Intune, depending on how your session hosts are managed. You can also set them by running the following PowerShell commands as an administrator on each session host, but if you do this, you should also set them in your operating system image:

# Disable Microsoft Store automatic update
If (!(Test-Path "HKLM:\Software\Policies\Microsoft\WindowsStore")) {
    New-Item -Path "HKLM:\Software\Policies\Microsoft\WindowsStore" -Force
}
New-ItemProperty -Path "HKLM:\Software\Policies\Microsoft\WindowsStore" -Name AutoDownload -PropertyType DWORD -Value 2 -Force

# Disable content delivery automatic download
If (!(Test-Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager")) {
    New-Item -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" -Force
}
New-ItemProperty -Path "HKCU:\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" -Name PreInstalledAppsEnabled -PropertyType DWORD -Value 0 -Force

# Disables content delivery automatic download
If (!(Test-Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager\Debug")) {
    New-Item -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager\Debug" -Force
}
New-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager\Debug" -Name ContentDeliveryAllowedOverride -PropertyType DWORD -Value 2 -Force

Next steps

Learn how to publish applications from the start menu or a file path with RemoteApp. For more information, see Publish applications.