Physical Disk Object
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
The PhysicalDisk performance object consists of counters that monitor hard or fixed disk drives. Disks are used to store file, program, and paging data. They are read to retrieve these items, and are written to record changes to them. The values of physical disk counters are sums of the values of the logical disks (or partitions) into which they are divided.
| Counter Name | Description | Counter Type |
|---|---|---|
% Disk Read Time |
Shows the percentage of time that the selected disk drive was busy servicing read requests. |
|
% Disk Time |
Shows the percentage of elapsed time that the selected disk drive was busy servicing read or write requests. |
|
% Disk Write Time |
Shows the percentage of elapsed time that the selected disk drive was busy servicing write requests. |
|
% Idle Time |
Shows the percentage of elapsed time during the sample interval that the selected disk drive was idle. |
|
Avg. Disk Bytes/Read |
Shows the average number of bytes that were transferred from the disk during read operations. |
|
Avg. Disk Bytes/Transfer |
Shows the average number of bytes that were transferred to or from the disk during write or read operations. |
|
Avg. Disk Bytes/Write |
Shows the average number of bytes that were transferred to the disk during write operations. |
|
Avg. Disk Queue Length |
Shows the average number of both read and write requests that were queued for the selected disk during the sample interval. |
|
Avg. Disk Read Queue Length |
Shows the average number of read requests that were queued for the selected disk during the sample interval. |
|
Avg. Disk sec/Read |
Shows the average time, in seconds, of a read of data from the disk. |
|
Avg. Disk sec/Transfer |
Shows the average time, in seconds, of a disk transfer. |
|
Avg. Disk sec/Write |
Shows the average time, in seconds, of a write of data to the disk. |
|
Avg. Disk Write Queue Length |
Shows the average number of write requests that were queued for the selected disk during the sample interval. |
|
Current Disk Queue Length |
Shows the number of requests that were outstanding on the disk at the time that the performance data was collected. This is a snapshot, not an average over the time interval. It includes requests in service at the time of the collection. Multispindle disk devices can have multiple requests active at one time, but other concurrent requests are awaiting service. This counter might reflect a transitory high or low queue length, but if this counter is consistently high, then it is likely that there is a sustained load on the disk drive. Requests experience delays proportional to the length of this queue, minus the number of spindles on the disks. This difference should average less than two. |
|
Disk Bytes/sec |
Shows the rate, in incidents per second, at which bytes were transferred to or from the disk during write or read operations. |
|
Disk Read Bytes/sec |
Shows the rate, in incidents per second, at which bytes were transferred from the disk during read operations. |
|
Disk Reads/sec |
Shows the rate, in incidents per second, at which read operations were performed on the disk. |
|
Disk Transfers/sec |
Shows the rate, in incidents per second, at which read and write operations were performed on the disk. |
|
Disk Write Bytes/sec |
Shows the rate, in incidents per second, at which bytes were transferred to the disk during write operations. |
|
Disk Writes/sec |
Shows the rate, in incidents per second, at which write operations were performed on the disk. |
|
Split IO/sec |
Shows the rate, in incidents per second, at which input/output (I/O) requests to the disk were split into multiple requests. A split I/O might result from requesting data in a size that is too large to fit into a single I/O, or from a fragmented disk subsystem. |