Freigeben über

USB System Suspend Resume Test

  • Artikel

This test verifies that a USB device continues to appear in Device Manager after the system resumes from S3 sleep state.

The test sends the system into S3 and then resumes the system. Upon system resume, the test seeks the device under test in the device manager to verify that it is both present and functional.

The suspend and resume cycle repeats 20 times. If the device under test is found upon resume every time, the test passes. If the device under test is no longer found in device manager, the test fails.

Test details

Associated requirements

Device.Connectivity.UsbDevices.MustBeFunctionalAfterResume Device.Connectivity.UsbDevices.MustResumeWithoutForcedReset

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows Server 2008 R2 (x64)

Expected run time

~70 minutes

Categories

Certification

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

 

 

Send comments about this topic to Microsoft