NDISTest 6.5 - 1 Machine - QosCapabilities
This test is automated.
Note
Adapter Configuration: DUT - QoS capable adapter
Test Cases:
Capability Test
- Ensure that QoS keyword is advertised and OID_QOS_HARDWARE_CAPABILITIES returns valid values.
Keyword (Disable-Enable) Test
QoS is enabled when the QoS keyword is enabled.
QoS is disabled when the QoS keyword is disabled.
QoS is disabled when the QoS keyword is set to an invalid enum value.
QoS is disabled when the QoS keyword is missing.
Checks enforced (in each of the following cases, assume QoS capable adapter):
NUM_TRAFFIC_CLASSES_MIN_VALUE = 3 through 8
- No error is flagged if this value is greater than 8
NUM_ETS_CAPABLE_TRAFFIC_CLASSES = 2 or more, no higher bound check
NUM_PFC_ENABLED_TRAFFIC_CLASSES = 1 or more, no higher bound check
If *QOS keyword is absent, QoS is assumed as disabled.
If *QOS keyword has invalid setting value, QoS is assumed as disabled.
When QoS is disabled, miniport driver must -
Return NDIS_STATUS_SUCCESS for OID_QOS_HARDWARE_CAPABILITIES and valid capability data in NDIS_QOS_CAPABILITIES structure
Return NDIS_STATUS_SUCCESS for OID_QOS_CURRENT_CAPABILITIES and ZEROED data in NDIS_QOS_CAPABILITIES structure
NDIS_QOS_CAPABILITIES_STRICT_TSA_SUPPORTED is advertised
Only known capability flags are advertised
NDIS_QOS_CAPABILITIES_STRICT_TSA_SUPPORTED
NDIS_QOS_CAPABILITIES_MACSEC_BYPASS_SUPPORTED
NDIS_QOS_CAPABILITIES_CEE_DCBX_SUPPORTED
NDIS_QOS_CAPABILITIES_IEEE_DCBX_SUPPORTED
Test details
Associated requirements |
Device.Network.LAN.DCB.DCB |
Platforms |
Windows Server 2012 (x64) Windows Server 2012 R2 |
Expected run time |
~5 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: LAN Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting LAN Testing.