Wlan L1 Test 12 - Enable and Disable WFD Autonomous GO
This automated test enables WifiDirect Autonomous GO, checks for the SSID being broadcast, and then disables Autonomous GO.
Test details
Associated requirements |
Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~2 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test does the following:
Test will fail if driver cannot return the WifiDirect capabilities.
Test will fail if driver returns ConcurrentOperationSupported as false.
Test will tell driver to enable Autonomous GO.
Test will request the SSID that is beaconing.
Test will stop Autonomous GO.
Test will fail if it cannot retrieve a non-empty SSID.
Test will fail if either start or stop of Autonomous GO fails.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.