WLAN Scan Tests - ScanMix4 - Reliability
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~6 minutes |
Categories |
Certification Reliability |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test performs the following actions:
Configure two routers, that are named Router 0 and Router 1, as follows:
Router 0 – 2.4Ghz : WPA2ENTERPRISE / AES /G/Channel 1
Router 0 – 5Ghz : WPA2PSK / AES /N/Channel 36
Router 1 – 2.4Ghz : WPA2ENTERPRISE / TKIP /G/Channel 9
Router 1 – 5Ghz : WPA2PSK / TKIP /N/Channel 36
Perform a scan by using a public API.
Validate Router 0. Router 1 2.4 GHz and 5 GHz are available in the scan list.
Perform a scan by using a private API.
Validate Router 0. Router 1 2.4 GHz and 5 GHz are available in the scan list.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
Determines whether or not the device supports 5 GHz. Default value: True |
AP1Password |
The root password for the first physical access point. Default value: password |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP2Password |
The root password for the second physical access point. Default value: password |
AP2IPAddress |
The root password for the second physical access point. Default value: 192.168.2.3 |
EnableTracing |
Default value: No |
Related topics