Target Control Debugging: zo Command (Windows CE 5.0)
This command performs debugging zone operations.
zop | mIndex | Name [Zone,[on | off][ZoneIndex]]
Options
- p
Specifies per-process operations. - m
Specifies per-module operations, and may be modified with the following additional options.Zo option Description Index Specifies the index of the process or module, as returned by the gi command. If no further parameters are specified, this command returns the current settings with the zone names. Name Specifies the name of the process or module. If no further parameters are specified, this command returns the current settings with the zone names. Name may be modified with the following options:
Zone
The zone to which this process or module zone is set. Any hexadecimal values must be preceded with 0x.
on
Indicates whether to set the bits of the current zone mask on.
off
Indicates whether to set the bits of the current zone mask off.
Example
The following command example shows how to display the zone names for the process at index 2.
zo p 2
The following command example shows how to set the zone for the module at index 0 to 0x100.
zo m 0 0x100
The following command example shows how to set bits 3 and 5 on and bit 2 off for process 3.
zo p 3 on 3, 5 off 2
See Also
Tools for Debugging and Testing
Send Feedback on this topic to the authors