Curvature Property

Specifies the curvature of a Shape control's corners. Available at design time and run time.

Shape.Curvature[ = nCurve]

Property Values

• nCurve
  The settings for the Curvature property are:

  Setting	Description
  0	Specifies no curvature, creating square corners.
  1 through 98	Specifies progressively rounded corners. A higher number increases the curvature.
  99	Specifies maximum curvature and creates a circle or ellipse.

Example

The following example demonstrates how the Curvature property can be used with the Shape control to display a circle, ellipse, or square on a form.

A form is created, and a set of option buttons and a command button are placed on the form. When you click one of the option buttons, the corresponding shape is displayed on the form. The Height, Width, and Curvature properties of each shape determine the type of shape (circle, ellipse, or square) created. The Curvature property is set to 99 to create the circle and ellipse.

frmMyForm = CREATEOBJECT('Form')  && Create a Form
frmMyForm.Closable = .F.  && Disable the Control menu box 

frmMyForm.AddObject('cmdCommand1','cmdMyCmndBtn')  && Add Command button
frmMyForm.AddObject('opgOptionGroup1','opgMyOptGrp') && Add Option Group
frmMyForm.AddObject('shpCircle1','shpMyCircle')  && Add Circle Shape
frmMyForm.AddObject('shpEllipse1','shpMyEllipse')  && Add Ellipse Shape
frmMyForm.AddObject('shpSquare','shpMySquare')  && Add Box Shape

frmMyForm.cmdCommand1.Visible =.T.  && "Quit" Command button visible

frmMyForm.opgOptionGroup1.Buttons(1).Caption = "\<Circle"
frmMyForm.opgOptionGroup1.Buttons(2).Caption = "\<Ellipse"
frmMyForm.opgOptionGroup1.Buttons(3).Caption = "\<Square"
frmMyForm.opgOptionGroup1.SetAll("Width", 100) && Set Option group width
frmMyForm.opgOptionGroup1.Visible = .T.  && Option Group visible
frmMyForm.opgOptionGroup1.Click  && Show the circle

frmMyForm.SHOW  && Display the form
READ EVENTS  && Start event processing

DEFINE CLASS opgMyOptGrp AS OptionGroup  && Create an Option Group
   ButtonCount = 3  && Three Option buttons
   Top = 10
   Left = 10
   Height = 75
   Width = 100

   PROCEDURE Click 
      ThisForm.shpCircle1.Visible = .F.  && Hide the circle
      ThisForm.shpEllipse1.Visible = .F.  && Hide the ellipse
      ThisForm.shpSquare.Visible = .F.  && Hide the square
      
      DO CASE
         CASE ThisForm.opgOptionGroup1.Value = 1
            ThisForm.shpCircle1.Visible = .T. && Show the circle
         CASE ThisForm.opgOptionGroup1.Value = 2 
            ThisForm.shpEllipse1.Visible = .T.  && Show the ellipse
         CASE ThisForm.opgOptionGroup1.Value = 3 
            ThisForm.shpSquare.Visible = .T.  && Show the square
      ENDCASE
ENDDEFINE

DEFINE CLASS cmdMyCmndBtn AS CommandButton  && Create Command button
   Caption = '\<Quit'  && Caption on the Command button
   Cancel = .T.  && Default Cancel Command button (Esc)
   Left = 125  && Command button column
   Top = 210  && Command button row
   Height = 25  && Command button height

   PROCEDURE Click
      CLEAR EVENTS  && Stop event processing, close Form
ENDDEFINE

DEFINE CLASS shpMyCircle AS SHAPE  && Create a circle
   Top = 10
   Left = 200
   Width = 100
   Height = 100
   Curvature = 99
   BackColor = RGB(255,0,0)  && Red
ENDDEFINE

DEFINE CLASS shpMyEllipse AS SHAPE  && Create an ellipse
   Top = 35
   Left = 200
   Width = 100
   Height = 50
   Curvature = 99
   BackColor = RGB(0,128,0)  && Green
ENDDEFINE

DEFINE CLASS shpMySquare AS SHAPE  && Create a square
   Top = 10
   Left = 200
   Width = 100
   Height = 100
   Curvature = 0
   BackColor = RGB(0,0,255)  && Blue
ENDDEFINE

See Also

DEFINE CLASS Command | DO CASE ... ENDCASE Command | Shape Control Properties, Methods and Events

Applies To: Shape Control