Windows-Anwendungen, die Rückrufe verwenden (ADO.NET)
In den meisten asynchronen Verarbeitungsszenarios möchten Sie eine Datenbankoperation starten und weitere Prozesse ausführen, ohne dabei warten zu müssen, bis die Datenbankoperation abgeschlossen ist. Viele Szenarios erfordern allerdings nach dem Beenden der Datenbankoperation eine Aktion. So möchten Sie beispielsweise in einer Windows-Anwendung die länger dauernde Operation an einen Hintergrundthread weitergeben, während der Benutzeroberflächenthread weiterhin reagieren kann. Nach dem Beenden der Datenbankoperation möchten Sie allerdings die Ergebnisse verwenden, um das Formular zu füllen. Dieser Typ von Szenario wird am Besten durch einen Rückruf implementiert.
Einen Rückruf implementieren Sie, indem Sie einen AsyncCallback-Delegaten in der BeginExecuteNonQuery-Methode, der BeginExecuteReader-Methode oder der BeginExecuteXmlReader-Methode angeben. Der Delegat wird nach Abschluss der Operation aufgerufen. Sie können dem Delegaten einen Verweis auf den SqlCommand selbst zuweisen, wodurch der Zugriff auf das SqlCommand-Objekt und das Aufrufen der passenden End-Methode vereinfacht wird, ohne eine globale Variable verwenden zu müssen.
Beispiel
In der folgenden Windows-Anwendung wird die Verwendung der BeginExecuteNonQuery-Methode gezeigt, wobei eine Transact-SQL-Anweisung ausgeführt wird, die eine Verzögerung von einigen Sekunden beinhaltet (Emulieren eines zeitintensiven Befehls).
In diesem Beispiel werden einige wichtige Techniken gezeigt, darunter das Aufrufen einer Methode, die mit dem Formular von einem separaten Thread aus zusammenwirkt. Zusätzlich zeigt dieses Beispiel, wie Sie Benutzer vom mehrfachen Ausführen eines Befehls abhalten können und wie Sie sicherstellen müssen, dass das Formular nicht vor dem Aufruf der Rückrufprozedur geschlossen wird.
Erstellen Sie zum Einrichten dieses Beispiels eine neue Windows-Anwendung. Positionieren Sie ein Button-Steuerelement und zwei Label-Steuerelemente auf dem Formular (übernehmen Sie für jedes Steuerelement den Standardnamen). Fügen Sie der Klasse des Formulars folgenden Code hinzu. Ändern Sie die Verbindungszeichenfolge entsprechend der Umgebung.
[Visual Basic]
' Add these to the top of the class:
Imports System
Imports System.Data
Imports System.Data.SqlClient
' Add this code to the form's class:
' You'll need this delegate in order to display text from a
' thread other than the form's thread. See the HandleCallback
' procedure for more information.
' This same delegate matches both the DisplayStatus
' and DisplayResults methods.
Private Delegate Sub DisplayInfoDelegate(ByVal Text As String)
' This flag ensures that the user doesn't attempt
' to restart the command or close the form while the
' asynchronous command is executing.
Private isExecuting As Boolean
' This example maintains the connection object
' externally, so that it's available for closing.
Private connection As SqlConnection
Private Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
' If you have not included "Asynchronous Processing=true"
' in the connection string, the command will not be able
' to execute asynchronously.
Return "Data Source=(local);Integrated Security=SSPI;" & _
"Initial Catalog=AdventureWorks;" & _
"Asynchronous Processing=true"
End Function
Private Sub DisplayStatus(ByVal Text As String)
Me.Label1.Text = Text
End Sub
Private Sub DisplayResults(ByVal Text As String)
Me.Label1.Text = Text
DisplayStatus("Ready")
End Sub
Private Sub Form1_FormClosing(ByVal sender As Object, _
ByVal e As System.Windows.Forms.FormClosingEventArgs) _
Handles Me.FormClosing
If isExecuting Then
MessageBox.Show(Me, "Can't close the form until " & _
"the pending asynchronous command has completed. " & _
"Please wait...")
e.Cancel = True
End If
End Sub
Private Sub Button1_Click( _
ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles Button1.Click
If isExecuting Then
MessageBox.Show(Me, _
"Already executing. " & _
"Please wait until the current query " & _
"has completed.")
Else
Dim command As SqlCommand
Try
DisplayResults("")
DisplayStatus("Connecting...")
connection = New SqlConnection(GetConnectionString())
' To emulate a long-running query, wait for
' a few seconds before working with the data.
' This command doesn't do much, but that's the point--
' it doesn't change your data, in the long run.
Dim commandText As String = _
"WAITFOR DELAY '0:0:05';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
command = New SqlCommand(commandText, connection)
connection.Open()
DisplayStatus("Executing...")
isExecuting = True
' Although it's not required that you pass the
' SqlCommand object as the second parameter in the
' BeginExecuteNonQuery call, doing so makes it easier
' to call EndExecuteNonQuery in the callback procedure.
Dim callback As New _
AsyncCallback(AddressOf HandleCallback)
' Once the BeginExecuteNonQuery method is called,
' the code continues--and the user can interact with
' the form--while the server executes the query.
command.BeginExecuteNonQuery(callback, command)
Catch ex As Exception
isExecuting = False
DisplayStatus( _
String.Format("Ready (last error: {0})", _
ex.Message))
If connection IsNot Nothing Then
connection.Close()
End If
End Try
End If
End Sub
Private Sub HandleCallback(ByVal result As IAsyncResult)
Try
' Retrieve the original command object, passed
' to this procedure in the AsyncState property
' of the IAsyncResult parameter.
Dim command As SqlCommand = _
CType(result.AsyncState, SqlCommand)
Dim rowCount As Integer = _
command.EndExecuteNonQuery(result)
Dim rowText As String = " rows affected."
If rowCount = 1 Then
rowText = " row affected."
End If
rowText = rowCount & rowText
' You may not interact with the form and its contents
' from a different thread, and this callback procedure
' is all but guaranteed to be running from a different
' thread than the form. Therefore you cannot simply call
' code that displays the results, like this:
' DisplayResults(rowText)
' Instead, you must call the procedure from the form's
' thread. One simple way to accomplish this is to call
' the Invoke method of the form, which calls the delegate
' you supply from the form's thread.
Dim del As New _
DisplayInfoDelegate(AddressOf DisplayResults)
Me.Invoke(del, rowText)
Catch ex As Exception
' Because you're now running code in a separate thread,
' if you don't handle the exception here, none of your
' other code will catch the exception. Because none of
' your code is on the call stack in this thread, there's
' nothing higher up the stack to catch the exception if
' you don't handle it here. You can either log the
' exception or invoke a delegate (as in the non-error
' case in this example) to display the error on the form.
' In no case can you simply display the error without
' executing a delegate as in the Try block here.
' You can create the delegate instance as you
' invoke it, like this:
Me.Invoke(New _
DisplayInfoDelegate(AddressOf DisplayStatus), _
String.Format("Ready(last error: {0}", ex.Message))
Finally
isExecuting = False
If connection IsNot Nothing Then
connection.Close()
End If
End Try
End Sub
// Add these to the top of the class, if they're not already there:
using System;
using System.Data;
using System.Data.SqlClient;
// Hook up the form's Load event handler (you can double-click on
// the form's design surface in Visual Studio), and then add
// this code to the form's class:
// You'll need this delegate in order to display text from a thread
// other than the form's thread. See the HandleCallback
// procedure for more information.
// This same delegate matches both the DisplayStatus
// and DisplayResults methods.
private delegate void DisplayInfoDelegate(string Text);
// This flag ensures that the user doesn't attempt
// to restart the command or close the form while the
// asynchronous command is executing.
private bool isExecuting;
// This example maintains the connection object
// externally, so that it's available for closing.
private SqlConnection connection;
private static string GetConnectionString()
{
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true" in the
// connection string, the command will not be able
// to execute asynchronously.
return "Data Source=(local);Integrated Security=SSPI;" +
"Initial Catalog=AdventureWorks; Asynchronous Processing=true";
}
private void DisplayStatus(string Text)
{
this.label1.Text = Text;
}
private void DisplayResults(string Text)
{
this.label1.Text = Text;
DisplayStatus("Ready");
}
private void Form1_FormClosing(object sender, System.Windows.Forms.FormClosingEventArgs e)
{
if (isExecuting)
{
MessageBox.Show(this, "Can't close the form until " +
"the pending asynchronous command has completed. Please " +
wait...");
e.Cancel = true;
}
}
private void button1_Click(object sender, System.EventArgs e)
{
if (isExecuting)
{
MessageBox.Show(this, "Already executing. Please wait until " +
"the current query has completed.");
}
else
{
SqlCommand command = null;
try
{
DisplayResults("");
DisplayStatus("Connecting...");
connection = new SqlConnection(GetConnectionString());
// To emulate a long-running query, wait for
// a few seconds before working with the data.
// This command doesn't do much, but that's the point--
// it doesn't change your data, in the long run.
string commandText =
"WAITFOR DELAY '0:0:05';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
command = new SqlCommand(commandText, connection);
connection.Open();
DisplayStatus("Executing...");
isExecuting = true;
// Although it's not required that you pass the
// SqlCommand object as the second parameter in the
// BeginExecuteNonQuery call, doing so makes it easier
// to call EndExecuteNonQuery in the callback procedure.
AsyncCallback callback = new AsyncCallback(HandleCallback);
// Once the BeginExecuteNonQuery method is called,
// the code continues--and the user can interact with
// the form--while the server executes the query.
command.BeginExecuteNonQuery(callback, command);
}
catch (Exception ex)
{
isExecuting = false;
DisplayStatus(
string.Format("Ready (last error: {0})", ex.Message));
if (connection != null)
{
connection.Close();
}
}
}
}
private void HandleCallback(IAsyncResult result)
{
try
{
// Retrieve the original command object, passed
// to this procedure in the AsyncState property
// of the IAsyncResult parameter.
SqlCommand command = (SqlCommand)result.AsyncState;
int rowCount = command.EndExecuteNonQuery(result);
string rowText = " rows affected.";
if (rowCount == 1)
{
rowText = " row affected.";
}
rowText = rowCount + rowText;
// You may not interact with the form and its contents
// from a different thread, and this callback procedure
// is all but guaranteed to be running from a different thread
// than the form. Therefore you cannot simply call code that
// displays the results, like this:
// DisplayResults(rowText)
// Instead, you must call the procedure from the form's thread.
// One simple way to accomplish this is to call the Invoke
// method of the form, which calls the delegate you supply
// from the form's thread.
DisplayInfoDelegate del =
new DisplayInfoDelegate(DisplayResults);
this.Invoke(del, rowText);
}
catch (Exception ex)
{
// Because you're now running code in a separate thread,
// if you don't handle the exception here, none of your other
// code will catch the exception. Because none of your
// code is on the call stack in this thread, there's nothing
// higher up the stack to catch the exception if you don't
// handle it here. You can either log the exception or
// invoke a delegate (as in the non-error case in this
// example) to display the error on the form. In no case
// can you simply display the error without executing a
// delegate as in the try block here.
// You can create the delegate instance as you
// invoke it, like this:
this.Invoke(new DisplayInfoDelegate(DisplayStatus),
String.Format("Ready(last error: {0}", ex.Message));
}
finally
{
isExecuting = false;
if (connection != null)
{
connection.Close();
}
}
}
private void Form1_Load(object sender, System.EventArgs e)
{
this.button1.Click += new System.EventHandler(this.button1_Click);
this.FormClosing += new System.Windows.Forms.
FormClosingEventHandler(this.Form1_FormClosing);
}