Bearbeiten

Freigeben über

Add-AzExpressRouteCircuitPeeringConfig

  • Reference
Module:
Az.Network

Adds a peering configuration to an ExpressRoute circuit.

Syntax

Add-AzExpressRouteCircuitPeeringConfig
   -Name <String>
   -ExpressRouteCircuit <PSExpressRouteCircuit>
   -PeeringType <String>
   -PeerASN <UInt32>
   -PrimaryPeerAddressPrefix <String>
   -SecondaryPeerAddressPrefix <String>
   -VlanId <Int32>
   [-SharedKey <String>]
   [-MicrosoftConfigAdvertisedPublicPrefixes <String[]>]
   [-MicrosoftConfigCustomerAsn <Int32>]
   [-MicrosoftConfigRoutingRegistryName <String>]
   [-PeerAddressType <String>]
   [-LegacyMode <Boolean>]
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzExpressRouteCircuitPeeringConfig
   -Name <String>
   -ExpressRouteCircuit <PSExpressRouteCircuit>
   -PeeringType <String>
   -PeerASN <UInt32>
   -PrimaryPeerAddressPrefix <String>
   -SecondaryPeerAddressPrefix <String>
   -VlanId <Int32>
   [-SharedKey <String>]
   [-MicrosoftConfigAdvertisedPublicPrefixes <String[]>]
   [-MicrosoftConfigCustomerAsn <Int32>]
   [-MicrosoftConfigRoutingRegistryName <String>]
   -RouteFilterId <String>
   [-PeerAddressType <String>]
   [-LegacyMode <Boolean>]
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzExpressRouteCircuitPeeringConfig
   -Name <String>
   -ExpressRouteCircuit <PSExpressRouteCircuit>
   -PeeringType <String>
   -PeerASN <UInt32>
   -PrimaryPeerAddressPrefix <String>
   -SecondaryPeerAddressPrefix <String>
   -VlanId <Int32>
   [-SharedKey <String>]
   [-MicrosoftConfigAdvertisedPublicPrefixes <String[]>]
   [-MicrosoftConfigCustomerAsn <Int32>]
   [-MicrosoftConfigRoutingRegistryName <String>]
   -RouteFilter <PSRouteFilter>
   [-PeerAddressType <String>]
   [-LegacyMode <Boolean>]
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]

Description

The Add-AzExpressRouteCircuitPeeringConfig cmdlet adds a peering configuration to an ExpressRoute circuit. ExpressRoute circuits connect your on-premises network to the Microsoft cloud by using a connectivity provider instead of the public Internet. Note that, after running Add-AzExpressRouteCircuitPeeringConfig, you must call the Set-AzExpressRouteCircuit cmdlet to activate the configuration.

Examples

Example 1: Add a peer to an existing ExpressRoute circuit

$circuit = Get-AzExpressRouteCircuit -Name $CircuitName -ResourceGroupName $rg
$parameters = @{
    Name = 'AzurePrivatePeering'
    Circuit = $circuit
    PeeringType = 'AzurePrivatePeering'
    PeerASN = 100
    PrimaryPeerAddressPrefix = '10.6.1.0/30'
    SecondaryPeerAddressPrefix = '10.6.2.0/30'
    VlanId  = 200
}
Add-AzExpressRouteCircuitPeeringConfig @parameters
Set-AzExpressRouteCircuit -ExpressRouteCircuit $circuit

Example 2

Adds a peering configuration to an ExpressRoute circuit. (autogenerated)

Add-AzExpressRouteCircuitPeeringConfig -ExpressRouteCircuit <PSExpressRouteCircuit> -MicrosoftConfigAdvertisedPublicPrefixes <String[]> -MicrosoftConfigCustomerAsn <Int32> -MicrosoftConfigRoutingRegistryName <String> -Name 'AzurePrivatePeering' -PeerASN 100 -PeerAddressType IPv4 -PeeringType AzurePrivatePeering -PrimaryPeerAddressPrefix '123.0.0.0/30' -SecondaryPeerAddressPrefix '123.0.0.4/30' -VlanId 300

Parameters

-DefaultProfile

The credentials, account, tenant, and subscription used for communication with azure.

Type:IAzureContextContainer
Aliases:AzContext, AzureRmContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ExpressRouteCircuit

The ExpressRoute circuit being modified. This is Azure object returned by the Get-AzExpressRouteCircuit cmdlet.

Type:PSExpressRouteCircuit
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-LegacyMode

The legacy mode of the Peering

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-MicrosoftConfigAdvertisedPublicPrefixes

For a PeeringType of MicrosoftPeering, you must provide a list of all prefixes you plan to advertise over the BGP session. Only public IP address prefixes are accepted. You can send a comma separated list if you plan to send a set of prefixes. These prefixes must be registered to you in a Routing Registry Name (RIR / IRR).

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MicrosoftConfigCustomerAsn

If you are advertising prefixes that are not registered to the peering AS number, you can specify the AS number to which they are registered.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MicrosoftConfigRoutingRegistryName

The Routing Registry Name (RIR / IRR) to which the AS number and prefixes are registered.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Name

The name of the peering relationship to be added.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-PeerAddressType

PeerAddressType

Type:String
Accepted values:IPv4, IPv6
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PeerASN

The AS number of your ExpressRoute circuit. This must be a Public ASN when the PeeringType is AzurePublicPeering.

Type:UInt32
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-PeeringType

The acceptable values for this parameter are: AzurePrivatePeering, AzurePublicPeering, and MicrosoftPeering

Type:String
Accepted values:AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-PrimaryPeerAddressPrefix

This is the IP Address range for the primary routing path of this peering relationship. This must be a /30 CIDR subnet. The first odd-numbered address in this subnet should be assigned to your router interface. Azure will configure the next even-numbered address to the Azure router interface.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-RouteFilter

This is an existing RouteFilter object.

Type:PSRouteFilter
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-RouteFilterId

This is the resource Id of an existing RouteFilter object.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-SecondaryPeerAddressPrefix

This is the IP Address range for the secondary routing path of this peering relationship. This must be a /30 CIDR subnet. The first odd-numbered address in this subnet should be assigned to your router interface. Azure will configure the next even-numbered address to the Azure router interface.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SharedKey

This is an optional MD5 hash used as a pre-shared key for the peering configuration.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VlanId

This is the Id number of the VLAN assigned for this peering.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

Inputs

PSExpressRouteCircuit

String

PSRouteFilter

Boolean

Outputs

PSExpressRouteCircuit