Migration Guide for Az 2.0.0

Artikel
11/19/2024

This document describes the changes between the 1.0.0 and 2.0.0 versions of Az

Module breaking changes

Module breaking changes

Az.Compute

Removed Managed Parameter from New-AzAvailabilitySet and Update-AzAvailabilitySet cmdlets in favor of using Sku = Aligned

Before
```
Update-AzAvailabilitySet -Managed
```
After
```
Update-AzAvailabilitySet -Sku Aligned
```

For consistency, removed Image parameter from 'ByName' and 'ByResourceId' parameter sets in Update-AzImage

Before

Note that the below code is functional, but the passed-in ImageName is not used, so removing this parameter has no functional impact.

Update-AzImage -ResourceGroupName $Rg -ImageName $Name -Image $Image -Tag $tags

Update-AzImage -ResourceId $Id -Image $Image -Tag $tags

After

Update-AzImage -ResourceGroupName $Rg -ImageName $Name -Tag $tags

Update-AzImage -ResourceId $Id -Tag $tags

For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Restart-AzVM

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Restart-AzVM -InputObject $VM -Name $Name

Restart-AzVM -ResourceId $Id -Name $Name
```
After
```
Restart-AzVM -InputObject $VM

Restart-AzVM -ResourceId $Id
```
For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Start-AzVM

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Start-AzVM -InputObject $VM -Name $Name

Start-AzVM -ResourceId $Id -Name $Name
```
After
```
Start-AzVM -InputObject $VM

Start-AzVM -ResourceId $Id
```
For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Stop-AzVM

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Stop-AzVM -InputObject $VM -Name $Name

Stop-AzVM -ResourceId $Id -Name $Name
```
After
```
Stop-AzVM -InputObject $VM

Stop-AzVM -ResourceId $Id
```
For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Remove-AzVM

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Remove-AzVM -InputObject $VM -Name $Name

Remove-AzVM -ResourceId $Id -Name $Name
```
After
```
Remove-AzVM -InputObject $VM

Remove-AzVM -ResourceId $Id
```
For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Set-AzVM

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Set-AzVM -InputObject $VM -Name $Name ...

Set-AzVM -ResourceId $Id -Name $Name ...
```
After
```
Set-AzVM -InputObject $VM ...

Set-AzVM -ResourceId $Id ...
```
For consistency, removed Name parameter from 'ByObject' and 'ByResourceId' parameter sets in Save-AzVMImage

Before

Note that the below code is functional, but the passed-in Name is not used, so removing this parameter has no functional impact.
```
Save-AzVMImage -InputObject $VM -Name $Name ...

Save-AzVMImage -ResourceId $Id -Name $Name ...
```
After
```
Save-AzVMImage -InputObject $VM ...

Save-AzVMImage -ResourceId $Id ...
```

Added ProtectionPolicy property to encapsulate ProtectFromScaleIn property in PSVirtualMachineScaleSetVM

Before

$vmss = Get-AzVMssVM ...
$vmss.ProtectFromScaleIn = $true

$vmss = Update-AzVMssVM ...
$vmss.ProtectFromScaleIn = $true

$vmss = Remove-AzVMssVMDataDisk ...
$vmss.ProtectFromScaleIn = $true

After

$vmss = Get-AzVMssVM ...
$vmss.ProtectionPolicy.ProtectFromScaleIn = $true

$vmss = Update-AzVMssVM ...
$vmss.ProtectionPolicy.ProtectFromScaleIn = $true

$vmss = Remove-AzVMssVMDataDisk ...
$vmss.ProtectionPolicy.ProtectFromScaleIn = $true

Added EncryptionSettingsCollection Property to enclose EncryptionSettings property in PSDisk

Before

$disk = New-AzDisk ... | Set-AzDiskDiskEncrytionKey ...
$disk.EncryptionSettings

$disk = New-AzDisk ... | Set-AzDiskKeyEncrytionKey ...
$disk.EncryptionSettings

$update = New-AzDiskUpdateConfig | Set-AzDiskUpdateDiskEncryptionKey ...
$update.EncryptionSettings

$update = New-AzDiskUpdateConfig | Set-AzDiskUpdateKeyEncryptionKey ...
$update.EncryptionSettings

After

$disk = New-AzDisk ... | Set-AzDiskDiskEncrytionKey ...
$disk.EncryptionSettingsCollection.EncryptionSettings

$disk = New-AzDisk ... | Set-AzDiskKeyEncrytionKey ...
$disk.EncryptionSettingsCollection.EncryptionSettings

$update = New-AzDiskUpdateConfig | Set-AzDiskUpdateDiskEncryptionKey ...
$update.EncryptionSettingsCollection.EncryptionSettings

$update = New-AzDiskUpdateConfig | Set-AzDiskUpdateKeyEncryptionKey ...
$update.EncryptionSettingsCollection.EncryptionSettings

Added EncryptionSettingsCollection Property to enclose EncryptionSettings property in PSSnapshot

Before

$snap = New-AzSnapshotConfig ... | Set-AzSnapshotDiskEncryptionKey ...
$snap.EncryptionSettings

$snap = New-AzSnapshotConfig ... | Set-AzSnapshotKeyEncryptionKey ...
$snap.EncryptionSettings

$update = New-AzSnapshotUpdateConfig ... | Set-AzSnapshotUpdateDiskEncryptionKey ...
$update.EncryptionSettings

$update = New-AzSnapshotUpdateConfig ... | Set-AzSnapshotUpdateKeyEncryptionKey ...
$update.EncryptionSettings

After

$snap = New-AzSnapshotConfig ... | Set-AzSnapshotDiskEncryptionKey ...
$snap.EncryptionSettingsCollection.EncryptionSettings

$snap = New-AzSnapshotConfig ... | Set-AzSnapshotKeyEncryptionKey ...
$snap.EncryptionSettingsCollection.EncryptionSettings

$update = New-AzSnapshotUpdateConfig ... | Set-AzSnapshotUpdateDiskEncryptionKey ...
$update.EncryptionSettingsCollection.EncryptionSettings

$update = New-AzSnapshotUpdateConfig ... | Set-AzSnapshotUpdateKeyEncryptionKey ...
$update.EncryptionSettingsCollection.EncryptionSettings

Removed VirtualMachineProfile property from PSVirtualMachineScaleSet

Before

$vmss = New-AzVMSSConfig ...
$vmss.VirtualMachineProfile.AdditionalCapabilities.UltraSSDEnabled = $true

After

$vmss = New-AzVMSSConfig ...
$vmss.AdditionalCapabilities.UltraSSDEnabled = $true

Cmdlet Set-AzVMBootDiagnostic removed alias to Set-AzVMBootDiagnostics

Before

Using deprecated alias
```
Set-AzVMBootDiagnostics
```
After
```
Set-AzVMBootDIagnostic
```
Cmdlet Export-AzLogAnalyticThrottledRequest removed alias to Export-AzLogAnalyticThrottledRequests

Before

Using deprectaed alias
```
Export-AzLogAnalyticThrottledRequests
```
After
```
Export-AzLogAnalyticThrottledRequest
```

Az.HDInsight

Removed the Grant-AzHDInsightHttpServicesAccess and Revoke-AzHDInsightHttpServicesAccess cmdlets. These are no longer necessary because HTTP access is always enabled on all HDInsight clusters.
Added a new Set-AzHDInsightGatewayCredential cmdlet. Use this cmdlet to change the gateway HTTP username and password (replaces Grant-AzHDInsightHttpServicesAccess).
Updated the Get-AzHDInsightJobOutput cmdlet to support granular role-based access to the storage key.
- Users with HDInsight Cluster Operator, Contributor, or Owner roles will not be affected.
- Users with only the Reader role will need to specify DefaultStorageAccountKey parameter explicitly.

For more information about these role-based access changes, see aka.ms/hdi-config-update

Before

Grant-AzHDInsightHttpServicesAccess -ClusterName $cluster -HttpCredential $credential

After

Set-AzHDInsightGatewayCredential -ClusterName $cluster -HttpCredential $credential

Users with only Reader role for cmdlet Get-AzHDInsightJobOutput

Before

Get-AzHDInsightJobOutput  -ClusterName $clusterName -JobId $jobId

After

Get-AzHDInsightJobOutput  -ClusterName $clusterName -JobId $jobId -DefaultStorageAccountKey $storageAccountKey

Az.Storage

Namespaces for types returned from Blob, Queue, and File cmdlets have changed their namespace from Microsoft.WindowsAzure.Storage to Microsoft.Azure.Storage. While this is not technically a breaking change according to the breaking change policy, it may require some changes in code that uses the methods from the Storage .Net SDK to interact with the objects returned from these cmdlets.

Example 1: Add a message to a Queue (change CloudQueueMessage object namespace)

Before:

$queue = Get-AzStorageQueue –Name $queueName –Context $ctx
$queueMessage = New-Object -TypeName "Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage,$($queue.CloudQueue.GetType().Assembly.FullName)" -ArgumentList "This is message 1"
$queue.CloudQueue.AddMessageAsync($QueueMessage)

After:

$queue = Get-AzStorageQueue –Name $queueName –Context $ctx
$queueMessage = New-Object -TypeName "Microsoft.Azure.Storage.Queue.CloudQueueMessage,$($queue.CloudQueue.GetType().Assembly.FullName)"  -ArgumentList "This is message 1"
$queue.CloudQueue.AddMessageAsync($QueueMessage)

Example 2: Fetch Blob/File Attributes with AccessCondition (change AccessCondition object namespace)

Before:

$accessCondition= New-Object Microsoft.WindowsAzure.Storage.AccessCondition

$blob = Get-AzureStorageBlob -Container $containerName -Blob $blobName
$blob.ICloudBlob.FetchAttributes($accessCondition)

$file = Get-AzureStorageFile -ShareName $shareName -Path $filepath
$file.FetchAttributes($accessCondition)

After:

$accessCondition= New-Object Microsoft.Azure.Storage.AccessCondition

$blob = Get-AzureStorageBlob -Container $containerName -Blob $blobName
$blob.ICloudBlob.FetchAttributes($accessCondition)

$file = Get-AzureStorageFile -ShareName $shareName -Path $filepath
$file.FetchAttributes($accessCondition)

While not technically a breaking change, you will notice output differences in the Sku.Name property of Storage Accounts returned from New/Get/Set-AzStorageAccount changes are as follows. (After the change, output and input SkuName are aligned.)
- "StandardLRS" -> "Standard_LRS";
- "StandardGRS" -> "Standard_GRS";
- "StandardRAGRS" -> "Standard_RAGRS";
- "StandardZRS" -> "Standard_ZRS";
- "PremiumLRS" -> "Premium_LRS";

The default service behavior when creating a storage account withous specifying a Kind has changed. In previous versions, when a storage account was created with no Kind specified, the Storage account Kind of Storage was used, in the new version StorageV2 is the default Kind value. If you need to create a V1 Storage account with Kind 'Storage', add parameter '-Kind Storage'

Example : Create a storage Account (Default Kind change)

Before:

PS c:\> New-AzStorageAccount -ResourceGroupName groupname -Name accountname -SkuName Standard_LRS -Location "westus"

StorageAccountName ResourceGroupName Location SkuName     Kind      AccessTier CreationTime          ProvisioningState EnableHttpsTrafficOnly
------------------ ----------------- -------- -------     ----      ---------- ------------          ----------------- ----------------------
accountname        groupname         westus   StandardLRS Storage   Hot        4/17/2018 10:34:32 AM Succeeded         False

After:

PS c:\> New-AzStorageAccount -ResourceGroupName groupname -Name accountname -SkuName Standard_LRS -Location "westus"

StorageAccountName ResourceGroupName Location SkuName      Kind      AccessTier CreationTime          ProvisioningState EnableHttpsTrafficOnly
------------------ ----------------- -------- -------      ----      ----------  ------------          ----------------- ----------------------
accountname        groupname         westus   Standard_LRS StorageV2 Hot        4/17/2018 10:34:32 AM Succeeded         False

Freigeben über

Migration Guide for Az 2.0.0

Table of Contents

Module breaking changes

Az.Compute

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Before

After

Az.HDInsight

Before

After

Users with only Reader role for cmdlet Get-AzHDInsightJobOutput

Before

After

Az.Storage

Example 1: Add a message to a Queue (change CloudQueueMessage object namespace)

Example 2: Fetch Blob/File Attributes with AccessCondition (change AccessCondition object namespace)

Example : Create a storage Account (Default Kind change)

Zusätzliche Ressourcen