Bearbeiten

Freigeben über

How to: SSO between ADAL and MSAL apps on macOS and iOS

  • Artikel

The Microsoft Authentication Library (MSAL) for iOS can share SSO state with ADAL Objective-C between applications. You can migrate your apps to MSAL at your own pace, ensuring that your users will still benefit from cross-app SSO--even with a mix of ADAL and MSAL-based apps.

If you're looking for guidance of setting up SSO between apps using the MSAL SDK, see Silent SSO between multiple apps. This article focuses on SSO between ADAL and MSAL.

The specifics implementing SSO depend on ADAL version that you're using.

ADAL 2.7.x

This section covers SSO differences between MSAL and ADAL 2.7.x

Cache format

ADAL 2.7.x can read the MSAL cache format. You don't need to do anything special for cross-app SSO with version ADAL 2.7.x. However, be aware of differences in account identifiers that those two libraries support.

Account identifier differences

MSAL and ADAL use different account identifiers. ADAL uses UPN as its primary account identifier. MSAL uses a non-displayable account identifier that is based of an object ID and a tenant ID for AAD accounts, and a sub claim for other types of accounts.

When you receive an MSALAccount object in the MSAL result, it contains an account identifier in the identifier property. The application should use this identifier for subsequent silent requests.

In addition to identifier, MSALAccount object contains a displayable identifier called username. That translates to userId in ADAL. username is not considered a unique identifier and can change anytime, so it should only be used for backward compatibility scenarios with ADAL. MSAL supports cache queries using either username or identifier, where querying by identifier is recommended.

Following table summarizes account identifier differences between ADAL and MSAL:

Account identifier MSAL ADAL 2.7.x Older ADAL (before ADAL 2.7.x)
displayable identifier username userId userId
unique non-displayable identifier identifier homeAccountId N/A
No account id known Query all accounts through allAccounts: API in MSALPublicClientApplication N/A N/A

This is the MSALAccount interface providing those identifiers:

@protocol MSALAccount <NSObject>

/*!
 Displayable user identifier. Can be used for UI and backward compatibility with ADAL.
 */
@property (readonly, nullable) NSString *username;

/*!
 Unique identifier for the account.
 Save this for account lookups from cache at a later point.
 */
@property (readonly, nullable) NSString *identifier;

/*!
 Host part of the authority string used for authentication based on the issuer identifier.
 */
@property (readonly, nonnull) NSString *environment;

/*!
 ID token claims for the account.
 Can be used to read additional information about the account, e.g. name
 Will only be returned if there has been an id token issued for the client Id for the account's source tenant.
 */
@property (readonly, nullable) NSDictionary<NSString *, NSString *> *accountClaims;

@end

SSO from MSAL to ADAL

If you have an MSAL app and an ADAL app, and the user first signs into the MSAL-based app, you can get SSO in the ADAL app by saving the username from the MSALAccount object and passing it to your ADAL-based app as userId. ADAL can then find the account information silently with the acquireTokenSilentWithResource:clientId:redirectUri:userId:completionBlock: API.

SSO from ADAL to MSAL

If you have an MSAL app and an ADAL app, and the user first signs into the ADAL-based app, you can use ADAL user identifiers for account lookups in MSAL. This also applies when migrating from ADAL to MSAL.

ADAL's homeAccountId

ADAL 2.7.x returns the homeAccountId in the ADUserInformation object in the result via this property:

/*! Unique AAD account identifier across tenants based on user's home OID/home tenantId. */
@property (readonly) NSString *homeAccountId;

homeAccountId in ADAL's is equivalent of identifier in MSAL. You can save this identifier to use in MSAL for account lookups with the accountForIdentifier:error: API.

ADAL's userId

If homeAccountId is not available, or you only have the displayable identifier, you can use ADAL's userId to lookup the account in MSAL.

In MSAL, first look up an account by username or identifier. Always use identifier for querying if you have it, and only use username as a fallback. If the account is found, use the account in the acquireTokenSilent calls.

Objective-C:

NSString *msalIdentifier = @"previously.saved.msal.account.id";
MSALAccount *account = nil;
    
if (msalIdentifier)
{
    // If you have MSAL account id returned either from MSAL as identifier or ADAL as homeAccountId, use it
    account = [application accountForIdentifier:@"my.account.id.here" error:nil];
}
else
{
    // Fallback to ADAL userId for migration
    account = [application accountForUsername:@"adal.user.id" error:nil];
}
    
if (!account)
{
  // Account not found.
  return;
}

MSALSilentTokenParameters *silentParameters = [[MSALSilentTokenParameters alloc] initWithScopes:@[@"user.read"] account:account];
[application acquireTokenSilentWithParameters:silentParameters completionBlock:completionBlock];

Swift:

        
let msalIdentifier: String?
var account: MSALAccount
        
do {
  if let msalIdentifier = msalIdentifier {
    account = try application.account(forIdentifier: msalIdentifier)
  }
  else {
    account = try application.account(forUsername: "adal.user.id") 
  }
             
  let silentParameters = MSALSilentTokenParameters(scopes: ["user.read"], account: account)          
  application.acquireTokenSilent(with: silentParameters) {
    (result: MSALResult?, error: Error?) in
    // handle result
  }  
} catch let error as NSError {
  // handle error or account not found
}

MSAL supported account lookup APIs:

/*!
 Returns account for the given account identifier (received from an account object returned in a previous acquireToken call)
 
 @param  error      The error that occurred trying to get the accounts, if any, if you're
                    not interested in the specific error pass in nil.
 */
- (nullable MSALAccount *)accountForIdentifier:(nonnull NSString *)identifier
                                         error:(NSError * _Nullable __autoreleasing * _Nullable)error;
    
/*!
Returns account for for the given username (received from an account object returned in a previous acquireToken call or ADAL)
    
@param  username    The displayable value in UserPrincipleName(UPN) format
@param  error       The error that occurred trying to get the accounts, if any, if you're
                    not interested in the specific error pass in nil.
*/
- (MSALAccount *)accountForUsername:(NSString *)username
                              error:(NSError * __autoreleasing *)error;

ADAL 2.x-2.6.6

This section covers SSO differences between MSAL and ADAL 2.x-2.6.6.

Older ADAL versions don't natively support the MSAL cache format. However, to ensure smooth migration from ADAL to MSAL, MSAL can read the older ADAL cache format without prompting for user credentials again.

Because homeAccountId isn't available in older ADAL versions, you'd need to look up accounts using the username:

/*!
 Returns account for for the given username (received from an account object returned in a previous acquireToken call or ADAL)

 @param  username    The displayable value in UserPrincipleName(UPN) format
 @param  error       The error that occurred trying to get the accounts, if any.  If you're not interested in the specific error pass in nil.
 */
- (MSALAccount *)accountForUsername:(NSString *)username
                              error:(NSError * __autoreleasing *)error;

For example:

Objective-C:

MSALAccount *account = [application accountForUsername:@"adal.user.id" error:nil];;
MSALSilentTokenParameters *silentParameters = [[MSALSilentTokenParameters alloc] initWithScopes:@[@"user.read"] account:account];
[application acquireTokenSilentWithParameters:silentParameters completionBlock:completionBlock];

Swift:

do {
  let account = try application.account(forUsername: "adal.user.id")          
  let silentParameters = MSALSilentTokenParameters(scopes: ["user.read"], account: account)
  application.acquireTokenSilent(with: silentParameters) { 
    (result: MSALResult?, error: Error?) in
    // handle result
  }   
} catch let error as NSError { 
  // handle error or account not found
}

Alternatively, you can read all of the accounts, which will also read account information from ADAL:

Objective-C:

NSArray *accounts = [application allAccounts:nil];
    
if ([accounts count] == 0)
{
  // No account found.
  return; 
}
if ([accounts count] > 1)
{
  // You might want to display an account picker to user in actual application
  // For this sample we assume there's only ever one account in cache
  return;
}
    ``
MSALSilentTokenParameters *silentParameters = [[MSALSilentTokenParameters alloc] initWithScopes:@[@"user.read"] account:accounts[0]];
[application acquireTokenSilentWithParameters:silentParameters completionBlock:completionBlock];

Swift:

      
do {
  let accounts = try application.allAccounts()
  if accounts.count == 0 {
    // No account found.
    return
  }
  if accounts.count > 1 {
    // You might want to display an account picker to user in actual application
    // For this sample we assume there's only ever one account in cache
    return
  }
  
  let silentParameters = MSALSilentTokenParameters(scopes: ["user.read"], account: accounts[0])
  application.acquireTokenSilent(with: silentParameters) {
    (result: MSALResult?, error: Error?) in
    // handle result or error  
  }  
} catch let error as NSError { 
  // handle error
}