Install MSAL and configure your project to use the library

Artikel
03/26/2024

Installing using CocoaPods

Installing CocoaPods

CocoaPods is a dependency manager for Swift and Objective-C Cocoa projects. It can be installed as a ruby gem, by using the following command.

$ sudo gem install cocoapods

Depending on your Ruby setup, sudo may or may not be needed.

Include MSAL in Podfile

For browser-delegated authentication:

You can use CocoaPods to install MSAL by adding it to your Podfile under target:

use_frameworks!
 
target 'your-target-here' do
	pod 'MSAL'
end

For native-authentication:

To use the native authentication capabilities provided by MSAL in your iOS application, you need to specify native-auth as subspec for the MSAL dependency as follows:

use_frameworks!
 
target 'your-target-here' do
	pod 'MSAL/native-auth'
end

If you're using the native-auth subspec, you must include the use_frameworks! setting in your Podfile.

Note: if you're checking out a particular branch or tag of MSAL, you will need to add the :submodules => true flag to your podfile, so that CocoaPods finds MSAL dependencies

pod 'MSAL', :git => 'https://github.com/AzureAD/microsoft-authentication-library-for-objc', :branch => 'dev', :submodules => true

You then you can run either pod install (if it's a new PodFile) or pod update (if it's an existing PodFile) to get the latest version of MSAL.

Subsequent calls to pod update will update to the latest released version of MSAL as well.

See CocoaPods for more information on setting up a PodFile

Installing using Carthage

Carthage is another popular dependency manager MSAL supports. The following is a sample using Carthage.

If you're building for iOS, tvOS, or watchOS

Install Carthage on your Mac using a download from their website or if using Homebrew brew install carthage.
You must create a Cartfile that lists the MSAL library for this project on Github.

github "AzureAD/microsoft-authentication-library-for-objc" "dev"

Note: this will point Carthage to the dev branch, so you'll always get the latest official release. If you would like to use a particular version, you can do the following:

github "AzureAD/microsoft-authentication-library-for-objc" == <latest_released_version>

Run carthage update. This will fetch dependencies into a Carthage/Checkouts folder, then build the MSAL library.
On your application targets’ “General” settings tab, in the “Linked Frameworks and Libraries” section, drag and drop the MSAL.framework from the Carthage/Build folder on disk.
On your application targets’ “Build Phases” settings tab, click the “+” icon and choose “New Run Script Phase”. Create a Run Script in which you specify your shell (ex: /bin/sh), add the following contents to the script area below the shell:

/usr/local/bin/carthage copy-frameworks

and add the paths to the frameworks you want to use under “Input Files”, e.g.:

$(SRCROOT)/Carthage/Build/iOS/MSAL.framework

This script works around an App Store submission bug triggered by universal binaries and ensures that necessary bitcode-related files and dSYMs are copied when archiving.

With the debug information copied into the built products directory, Xcode will be able to symbolicate the stack trace whenever you stop at a breakpoint. This will also enable you to step through third-party code in the debugger.

When archiving your application for submission to the App Store or TestFlight, Xcode will also copy these files into the dSYMs subdirectory of your application’s .xcarchive bundle.

Installing MSAL using Swift Packages

You can add MSAL as a swift package dependency. For MSAL version 1.1.14 and above, distribution of MSAL binary framework as a Swift package is available.

For your project in Xcode, click File → Swift Packages → Add Package Dependency...
Choose project to add dependency in
Enter : https://github.com/AzureAD/microsoft-authentication-library-for-objc as the package repository URL
Choose package options with :
1. Rules → Branch : main (For latest MSAL release)
2. Rules → Version → Exact : [release version >= 1.1.14] (For a particular release version)

For any issues, please check if there is an outstanding SPM/Xcode bug. Workarounds for some bugs we encountered :

If you have a plugin in your project you might encounter CFBundleIdentifier collision. Each bundle must have a unique bundle identifier error. Workaround
While archiving, error : “IPA processing failed” UserInfo={NSLocalizedDescription=IPA processing failed}. Workaround
For a macOS app, “Command CodeSign failed with a nonzero exit code” error. Workaround

Install MSAL using Git Submodule

If your project is managed in a git repository you can include MSAL as a git submodule. First check the GitHub Releases Page for the latest release tag. Replace <latest_release_tag> with that version.

git submodule add https://github.com/AzureAD/microsoft-authentication-library-for-objc msal
cd msal
git checkout tags/<latest_release_tag>
git submodule update --init --recursive
cd ..
git add msal
git commit -m "Use MSAL git submodule at <latest_release_tag>"
git push

Configuring your project to use MSAL

Adding MSAL to your project

Register your app in the Microsoft Entra Admin Center.
Make sure you register a redirect URI for your application. It should be in the following format:

msauth.$(PRODUCT_BUNDLE_IDENTIFIER)://auth

Add a new keychain group to your project Capabilities. Keychain group should be com.microsoft.adalcache on iOS and com.microsoft.identity.universalstorage on macOS.

See more information about keychain groups and Silent SSO for MSAL.

iOS only steps:

Add your application's redirect URI scheme to your Info.plist file

<key>CFBundleURLTypes</key>
<array>
    <dict>
        <key>CFBundleURLSchemes</key>
        <array>
            <string>msauth.$(PRODUCT_BUNDLE_IDENTIFIER)</string>
        </array>
    </dict>
</array>

Add LSApplicationQueriesSchemes to allow making call to Microsoft Authenticator if installed.

Note that “msauthv3” scheme is needed when compiling your app with Xcode 11 and later.

<key>LSApplicationQueriesSchemes</key>
<array>
	<string>msauthv2</string>
	<string>msauthv3</string>
</array>

See more info about configuring redirect uri for MSAL

To handle a callback, add the following to appDelegate:

Swift

func application(_ app: UIApplication, open url: URL, options: [UIApplication.OpenURLOptionsKey : Any] = [:]) -> Bool {
        
	return MSALPublicClientApplication.handleMSALResponse(url, sourceApplication: options[UIApplication.OpenURLOptionsKey.sourceApplication] as? String)
}

Objective-C

- (BOOL)application:(UIApplication *)app
            openURL:(NSURL *)url
            options:(NSDictionary<UIApplicationOpenURLOptionsKey,id> *)options
{
    return [MSALPublicClientApplication handleMSALResponse:url 
                                         sourceApplication:options[UIApplicationOpenURLOptionsSourceApplicationKey]];
}

Note, that if you adopted UISceneDelegate on iOS 13+, MSAL callback needs to be placed into the appropriate delegate method of UISceneDelegate instead of AppDelegate. MSAL handleMSALResponse:sourceApplication: must be called only once for each URL. If you support both UISceneDelegate and UIApplicationDelegate for compatibility with older iOS, MSAL callback would need to be placed into both files.

Swift

func scene(_ scene: UIScene, openURLContexts URLContexts: Set<UIOpenURLContext>) {
        
        guard let urlContext = URLContexts.first else {
            return
        }
        
        let url = urlContext.url
        let sourceApp = urlContext.options.sourceApplication
        
        MSALPublicClientApplication.handleMSALResponse(url, sourceApplication: sourceApp)
    }

Objective-C

- (void)scene:(UIScene *)scene openURLContexts:(NSSet<UIOpenURLContext *> *)URLContexts
{
    UIOpenURLContext *context = URLContexts.anyObject;
    NSURL *url = context.URL;
    NSString *sourceApplication = context.options.sourceApplication;
    
    [MSALPublicClientApplication handleMSALResponse:url sourceApplication:sourceApplication];
}

macOS only steps:

Make sure your application is signed with a valid development certificate. While MSAL will still work in the unsigned mode, it will behave differently around cache persistence.

Microsoft Enterprise SSO plug-in for Apple devices

Microsoft has recently released a new plug-in that uses the newly announced Apple feature called Enterprise Single Sign-On. Microsoft Enterprise SSO plug-in for Apple devices offers the following benefits:

Comes delivered in Microsoft Authenticator app automatically and can be enabled by any MDM.
Provides seamless SSO for Active Directory joined accounts across all applications that support Apple's Enterprise Single Sign-On feature.
COMING SOON: Provides seamless SSO across Safari browsers and applications on the device.

MSAL 1.1.0 and above will use Microsoft Enterprise SSO plug-in automatically instead of the Microsoft Authenticator app when it is active on the device. To use Microsoft Enterprise SSO plug-in in your tenant, you need to enable it in your MDM profile.

See more information about configuring Microsoft Enterprise SSO plug-in for your device here

Single Account Mode

If your app needs to support just one signed-in user at a time, MSAL provides a simple way to read the signed in account. This API must be also used when you are building an application to run on devices that are configured as shared devices - meaning that a single corporate device is shared between multiple employees. Employees can sign in to their devices and access customer information quickly. When they are finished with their shift or task, they will be able to sign-out of all apps on the shared device.

Here is a code snippet that shows how you can retrieve current account. You must call API every time when your app comes to foreground or before performing a sensitive operation to detect any signed-in account changes.

Swift

let msalParameters = MSALParameters()
msalParameters.completionBlockQueue = DispatchQueue.main
                
application.getCurrentAccount(with: msalParameters, completionBlock: { (currentAccount, previousAccount, error) in
            
	// currentAccount is the currently signed in account
	// previousAccount is the previously signed in account if any
})

Objective-C

MSALParameters *parameters = [MSALParameters new];
parameters.completionBlockQueue = dispatch_get_main_queue();
        
[application getCurrentAccountWithParameters:parameters
                             completionBlock:^(MSALAccount * _Nullable account, MSALAccount * _Nullable previousAccount, NSError * _Nullable error)
{
	// currentAccount is the currently signed in account
	// previousAccount is the previously signed in account if any
}];

Multiple Accounts Mode

MSAL also provides a public API to query multiple accounts, granted that they exist in the MSAL cache.

Make sure the umbrella header MSAL-umbrella.h is imported (just MSAL for Swift)
Create config, then use it to initialize an application object
Also initialize `MSALAccountEnumerationParameters`` object with the account identifier. Each MSALAccount object has a parameter called “identifier”, which represents the unique account identifier associated with the given MSALAccount object. We recommend using it as the primary search criterion.
Then invoke the API "accountsFromDeviceForParameters" from the application object using the enumeration parameter. If you have multiple accounts in MSAL cache, it will return an array containing MSALAccounts that have the account identifier you specified in the previous step.
Once the MSAL account is retrieved, invoke acquire token silent operation

Swift

#import MSAL //Make sure to import MSAL  

let config = MSALPublicClientApplicationConfig(clientId:clientId
                                           	redirectUri:redirectUri
                                            	authority:authority)
guard let application = MSALPublicClientApplication(configuration: config) else { return }

let accountIdentifier = "9f4880d8-80ba-4c40-97bc-f7a23c703084.f645ad92-e38d-4d1a-b510-d1b09a74a8ca"
let parameters = MSALAccountEnumerationParameters(identifier:accountIdentifier)

var scopeArr = ["https://graph.microsoft.com/.default"]

if #available(macOS 10.15, *)
{
	 application.accountsFromDeviceForParameters(with: parameters, completionBlock:{(accounts, error) in
         if let error = error 
         {
            //Handle error
         }
         
         guard let accountObjs = accounts else {return}
         
         let tokenParameters = MSALSilentTokenParameters(scopes:scopeArr, account: accountObjs[0]);
                                                                                                   
         application.acquireTokenSilentWithParameters(with: tokenParameters, completionBlock:{(result, error) in 
                     if let error = error
                     {
                         //handle error
                     }
                                       
                     guard let resp = result else {return} //process result
                                                                                             
         })                                                               
                                                                                                                                                             
   })
  
}

Objective-C

//import other key libraries  
#import "MSAL-umbrella.h" //Make sure to import umbrella file 

    MSALPublicClientApplicationConfig *config = [[MSALPublicClientApplicationConfig alloc] initWithClientId:clientId
     redirectUri:redirectUri
       authority:authority];

    MSALPublicClientApplication *application = [[MSALPublicClientApplication alloc] initWithConfiguration:config error:&error];
    MSALAccountEnumerationParameters *parameters = [[MSALAccountEnumerationParameters alloc] initWithIdentifier:@"9f4880d8-80ba-4c40-97bc-f7a23c703084.f645ad92-e38d-4d1a-b510-d1b09a74a8ca"]; //init with account identifier

    NSArray<NSString *> *scopeArr = [[NSArray alloc] initWithObjects: @"https://graph.microsoft.com/.default",nil]; //define scope

    if (@available(macOS 10.15, *)) //Currently, this public API requires macOs version 10.15 or greater.
    {
        [application accountsFromDeviceForParameters:parameters
                                     completionBlock:^(NSArray<MSALAccount *> * _Nullable accounts, __unused NSError * _Nullable error)
        {
            if (error)
            {
              //Log error & return 
            }
          
            if (accounts)
            {
                NSLog(@"hi there");
                MSALSilentTokenParameters *tokenParameters = [[MSALSilentTokenParameters alloc] initWithScopes:scopeArr account:accounts[0]];

                [application acquireTokenSilentWithParameters:tokenParameters
                                completionBlock:^(MSALResult * _Nullable result, NSError * _Nullable error)
                 {
                    if (error)
                    {
                        //Log Error & return 
                    }
                    if (result)
                    {
                        //process result
                    }
                }
                 ];
            }
     
        }];
    }

Detect shared device mode

Use following code to read current device configuration, including whether device is configured as shared:

Swift

application.getDeviceInformation(with: nil, completionBlock: { (deviceInformation, error) in
                
	guard let deviceInfo = deviceInformation else {
		return
	}
                
	let isSharedDevice = deviceInfo.deviceMode == .shared
	// Change your app UX if needed
})

Objective-C

[application getDeviceInformationWithParameters:nil
                                completionBlock:^(MSALDeviceInformation * _Nullable deviceInformation, NSError * _Nullable error)
{
	if (!deviceInformation)
	{
		return;
	}
            
	BOOL isSharedDevice = deviceInformation.deviceMode == MSALDeviceModeShared;
	// Change your app UX if needed
}];

Implement signout

To signout account from your app, call MSAL's signout API. You can also optionally sign out from the browser. When MSAL is running on a shared device, signout API will signout globally from all apps on user's device.

Swift

let account = .... /* account retrieved above */

let signoutParameters = MSALSignoutParameters(webviewParameters: self.webViewParameters!)
signoutParameters.signoutFromBrowser = false
            
application.signout(with: account, signoutParameters: signoutParameters, completionBlock: {(success, error) in
                
	if let error = error {
		// Signout failed
		return
	}
                
	// Sign out completed successfully
})

Objective-C

MSALAccount *account = ... /* account retrieved above */;
        
MSALSignoutParameters *signoutParameters = [[MSALSignoutParameters alloc] initWithWebviewParameters:webViewParameters];
signoutParameters.signoutFromBrowser = NO;
        
[application signoutWithAccount:account signoutParameters:signoutParameters completionBlock:^(BOOL success, NSError * _Nullable error)
{
	if (!success)
	{
		// Signout failed
		return;
	}
            
	// Sign out completed successfully
}];

Freigeben über

Install MSAL and configure your project to use the library

Installing using CocoaPods

Installing CocoaPods

Include MSAL in Podfile

Installing using Carthage

If you're building for iOS, tvOS, or watchOS

Installing MSAL using Swift Packages

Install MSAL using Git Submodule

Configuring your project to use MSAL

Adding MSAL to your project

iOS only steps:

Swift

Objective-C

Swift

Objective-C

macOS only steps:

Microsoft Enterprise SSO plug-in for Apple devices

Single Account Mode

Swift

Objective-C

Multiple Accounts Mode

Swift

Objective-C

Detect shared device mode

Swift

Objective-C

Implement signout

Swift

Objective-C

Feedback

Zusätzliche Ressourcen