Freigeben über

Small Basic Featured Program - Fluid Particle Simulation

  • Artikel

Sam Gerard made this fluid simulation with LitDev's help!

Here is Sam's profile: _'-'_

In Sam's words...

 

I built a program to simulate water particles, its not very accurate or fast, but its the best I could do. I was just wondering if anyone had any ideas of what I could add/change in this project.

Program:

https://smallbasic.com/program/?JQK179

Instructions:

Left mouse spawns particles

Right mouse moves them around

 

NOTE: You'll need to import the program into Small Basic to use right-click. Just open Small Basic, click Import, paste in the ID (JQK179), click OK, and then click the Run blue triangle button in the toolbar ribbon (or press F5).

 

Sam posted his program in the forum here: https://social.msdn.microsoft.com/Forums/en-US/fa9c210c-a857-4e28-b6da-6d90545a35a0/particle-fluid?forum=smallbasic

So special thanks to Sam for the program and to LitDev for the assist!

 

Small and Basically yours,

   - Ninja Ed

Comments

  • Anonymous
    December 11, 2015
    updated ur prog: TNC395 -fastshapes -quicker calc -colours added

  • Anonymous
    December 12, 2015
    Great. Thanks, QWX!