Freigeben über

Selecting hardware for your project

  • Artikel

The .NET Micro Framework (NETMF) has opened up embedded software development to a large new audience of existing .NET developers. There are also a number of current embedded software developers who are trying out NETMF for the productivity and flexibility that it provides. For these groups, the question of what processor to select and what development board to use can be difficult until they have a little more experience with NETMF and the options that are available. We get asked this frequently enough that I decided to write down some of the guidance that we commonly share when asked.

Check it out at: https://www.netmf.com/TechnicalResource/References/10-04-13/Selecting_Hardware.aspx?id=382fcb2d-19a2-4258-9664-4008c016b535

Comments

  • Anonymous
    April 13, 2010
    Can you change the feed for this blog so it gives full posts instead of partial ones?  it's an unfortunate default chosen for blogs.msdn.com (changable per blog) and it results in lots of annoyed developers who can't read the full posts in their RSS readers :) TIA!

  • Anonymous
    April 13, 2010
    I'll look getting full posts.  I was not aware if the issue.  Thanks for bringing it to my attention.  

  • Anonymous
    April 16, 2010
    I am student at university and interested in .net micro framework. I want to make sumo robot with .net micro framework. Can i make sumo robot with .net mf? If, it is possible, which hardware do you offer me?

  • Anonymous
    April 22, 2010
    Hi Burak,    You can make a Sumo Robot on several of the boards that are available.  There are two that come to mind.  The SJJ Micro board has some instruction on projects including (I believe) some instruction on a robot.  There is also the GHI FEZ boards.  They actually sell a functional robot on their FEZ module that is about Sumobot size. I hope that helps.

  • Anonymous
    April 25, 2010
    I am using visual studio 2008, i would like to make custom project for symbol hand held scanner which has windows CE, which compact framework should i use for symbol scanner.

  • Anonymous
    April 29, 2010
    Hi Ziz,    There are several versions of CE and the Compact Framework available.  I suggest you look at http://msdn.microsoft.com/en-us/netframework/aa497273.aspx where you will find the experts for that technology.

  • Anonymous
    May 07, 2010
    You might fix the typo in the article title - hardware

  • Anonymous
    May 08, 2010
    Hi, I would like to share with you that we had successfully port Microsoft .NET Micro Framework to TI Stellaris MCU, an ARM Cortex M3 core MCU. Please refer to following video link for TI Stellaris LM3S9B96 runs Microsoft .NET Micro Framework live demo. http://www.youtube.com/watch?v=nO_IWpr-vJU Stan Golden IC Technology Co.,Ltd. stan@golden-ic.com