Freigeben über

Update on installation of Live Mesh for Mobile – FIXED!

  • Artikel

Thank you for using the Live Mesh for Mobile client! For users who saw a failure to add their mobile phone to their mesh, we have deployed an updated build of Live Mesh for Mobile. You will need to download the Mobile Installer from https://m.mesh.com/install/wm6/LiveMesh.cab again. Once you have the new installer on your phone, run it and the installed client will be upgraded to the new version. The new Mobile Live Mesh Client is version number 0.9.3424.6 (check this through Menu -> About). Now you can start Live Mesh, sign in, and you should be good to go.

Currently Live Mesh for mobile devices is provided only on a limited basis in the US and UK. (UPDATE 2: Live Mesh for Mobile in the UK is currently full, in both the US and the UK. We know many of you are excited about trying Live Mesh with your mobile devices, so we'll be adding more spots very soon - stay tuned! ) If you have a Windows Mobile 6.x client, click on one of the following links (US residents, UK residents). Sign in with your LiveID, and you’ll be redirected to the device ring where you’ll see a link to “Use Live Mesh for mobile devices.” Alternately, once you’ve signed in this way, the mobile client should be available for download by pointing your phone’s browser to https://m.mesh.com.

Thank you for your patience.

The Live Mesh Team

Comments

  • Anonymous
    October 30, 2008
    PingBack from http://mstechnews.info/2008/10/update-on-installation-of-live-mesh-for-mobile-%e2%80%93-fixed/

  • Anonymous
    October 30, 2008
    Are certain devices being excluded? For instance, when i try most recent mesh installer on my old 6700, I get signed in and the app fails while trying to get the device identifier. My old ppc 6700 runs mobile 6 just fine. It would be a shame to not have it synced.

  • Anonymous
    October 30, 2008
    Working well so far.  Thanks for the quick turnaround.

  • Anonymous
    October 30, 2008
    awesome response time guys...  also, this is the most painless way to sync between mobile and desktop yet.  I'm loving it.   Great update.

  • Anonymous
    October 30, 2008
    I'm getting the same as Todd above.  Trying to add a HTC Touch Dual running Wm 6.1.

  • Anonymous
    October 30, 2008
    I'm also getting a device id failure on a Sony X1.

  • Anonymous
    October 30, 2008
    Still get the same Unsatisfied Dependency error.  I'm running 3.5.  What version is it looking for?

  • Anonymous
    October 30, 2008
    Live mesh is one of the most amazing programs MS has came out with in years but the cab does not work on my ATT Tilit version 6.1.  I got a limited error message!   It should be standard on every new Windows 7 OS. Derek

  • Anonymous
    October 30, 2008
    I've also tried the new release and although the software installs fine I'm also seeing the installation failed message when it tries to retrieve the device identifier (T-Mobile MDA III / HTC Tytn II).

  • Anonymous
    October 30, 2008
    The comment has been removed

  • Anonymous
    October 31, 2008
    When i logon to the US Residents link i do not see the "Use Live Mesh for mobile devices.” What's up?

  • Anonymous
    October 31, 2008
    nevermind i see it now had to go to add device and it's a link on that screen.

  • Anonymous
    October 31, 2008
    I installed the .CAB on my Windows Mobile 6.1 device (Sprint HTC Mogul).  Upon signing-in I recieve the following message: Live Mesh is not available. Live Mesh for Windows Mobile Client is only available to a limited  number of users. You are currently not allowed to add your mobile phone to Live Mesh.

I've also noticed that when I sign-in on http://m.mesh.com I don't get the option to add my device to my mesh that I've seen in screenshots at a few sites.  It's just the normal login.

  • Anonymous
    October 31, 2008
    I keep getting this error when I follow the US link: Unknown Error. (Code: f565e626-4034, 10/31/2008 7:16 AM)

  • Anonymous
    October 31, 2008
    Im still getting an error after trying to get the device identifier. Looks like it will be good when it works!

  • Anonymous
    October 31, 2008
    +1 on the not being added to my mesh.  Setup fails on my Pantech Duo when attempting to get the mobile identifier.

  • Anonymous
    October 31, 2008
    The one from “m.mesh.com/install/wm6/LiveMesh.cab” worked.   I had installed the one from www.mesh.com/Web/MobileDownload.aspx this morning, which links to a download at www.mesh.com/install/wm6/LiveMesh.cab instead of “m.mesh.com”--that one doesn’t work.

  • Anonymous
    October 31, 2008
    Some people are still having issues adding their phones to their mesh, and one reason is this: When you click on one of the limited-access signup links, do so from your PC, not your phone's browser.

  • Anonymous
    October 31, 2008
    My Treo Pro dies every time on the 'Getting Mobile Phone Identifier'...

  • Anonymous
    October 31, 2008
    I was able to install the client on my Treo 750, but it has yet to sync my pictures to the Mobile Picture folder and it has been several hours. I don't think this is working. It's supposed to sync every 30 minutes according to the settings.

  • Anonymous
    October 31, 2008
    I too am getting "Unsatisfied Dependency" (missing a suitable version of SQL CE on this device).  HTC Hermes running WM6.1.  Help?

  • Anonymous
    October 31, 2008
    So how soon before LiveMesh gets to permanently replace ActiveSync? lol

  • Anonymous
    October 31, 2008
    To all those receiving either the "Unsatisfied Dependency" error or the "error getting device identifier": We are currently investigating both of these issues and will let you know as soon as we've learned anything.   It would help us if we could get logs from as many of you as possible.  Please see the following sticky thread on our Live Mesh for Mobile forum: http://social.microsoft.com/Forums/en-US/LiveMeshMobile/thread/6e677966-3e30-4c6e-aa65-0998fc5ce632/

  • Anonymous
    October 31, 2008
    Announced this week at PDC was the Windows Mobile Live Mesh client.  If you aren’t familiar with

  • Anonymous
    October 31, 2008
    anyone still with 'Getting Mobile Phone Identifier' error - try the initial sign in on your device through a wifi network and not your grps/3g radio connection. Worked for me anyhoo...

  • Anonymous
    October 31, 2008
    yep, works fine through wifi... thanks Steve.

  • Anonymous
    October 31, 2008
    Filed under: Multimedia , Software Ready to get your Mesh on, Windows Mobile 6.x users? Fantastic. The

  • Anonymous
    October 31, 2008
    Announced this week at PDC was the Windows Mobile Live Mesh client.  If you aren’t familiar with

  • Anonymous
    October 31, 2008
    I have the new version of Live Mesh, but Mobile Device support still says "coming soon".  Is this expected behavior?

  • Anonymous
    October 31, 2008
    Was looking forward to syncing up my phone to test it, but it says my username isn't allowed to add my mobile phone. Oh well - can't wait till it's rolled out to the rest of us, ya?

  • Anonymous
    October 31, 2008
    Can you open this up to Canadian residents?

  • Anonymous
    November 01, 2008
    When will this be available in Asia?

  • Anonymous
    November 01, 2008
    I installed it and it says: Live Mesh is not available Live Mesh for windows mobile client is only available to a limited number of users. You are currently not allowed to add your mobile phone to Live Mesh Any Ideas what to do?

  • Anonymous
    November 01, 2008
    I know many consider PocketPC 03 old, out of date and useless however I still get a large amount of use out of mine. It's sad to see you only supporting Windows Mobile and the cab file will not even extract on PPC03. I use my unit as a GPS device in the car, a media player for music and movies for the kids when we travel and as a wireless media player hooked into my Bose pulling from my Gigs of music and video stored on my file server. The ability to sync movies and files directly to the PPC via Mesh prior to leaving on a trip or even better to be able to reach out to my file server and add some new content to the PPC just by dropping the file into Mesh would be a huge benefit.

  • Anonymous
    November 01, 2008
    i keep getting the i dont have proper significant sql on my device what gives with that??? it wont let me install the can file and ive got the htc tytn 2 hmmmm....any one with some info please??

  • Anonymous
    November 01, 2008
    Esta semana durante el PDC08 en Los Angeles se anuncio la disponibilidad del cliente Live Mesh para Windows

  • Anonymous
    November 02, 2008
    http://blogs.msdn.com/livemesh/arch...bile-fixed.aspx "Thank you for using the Live Mesh for Mobile

  • Anonymous
    November 02, 2008
    The comment has been removed

  • Anonymous
    November 03, 2008
    I get a "not enough space" error installing on WM6 but it doesn't tell me how much I need.

  • Anonymous
    November 03, 2008
    随美国PDC 2008上发布Live Mesh的CTP，Live Mesh for Mobile, for MAC都可以在mesh.com上下载了，但是PDC当天的版本有问题，有些用户安装不上。现在的版本已经没问题了。

  • Anonymous
    November 03, 2008
    Mobile Mesh doesn´t download the updated files to my phone. It syncs, but doesn´t download the files.

  • Anonymous
    November 03, 2008
    The comment has been removed

  • Anonymous
    November 03, 2008
    Hi all If you're getting Unsatisfied Dependency errors PLEASE install SQL CE 3.1 version. Just check this link and follow the instructions.. This worked like a charm for me.. http://social.microsoft.com/Forums/en-US/LiveMeshMobile/thread/b8a6da09-c53a-4168-91bf-f476d2a1876f

  • Anonymous
    November 03, 2008
    I'm unable to install on the Mac... i read somewhere the mac client has been pulled for fixes.. FYI

  • Anonymous
    November 03, 2008
    The comment has been removed

  • Anonymous
    November 03, 2008
    The comment has been removed

  • Anonymous
    November 03, 2008
    When using WiFi: Live Mesh is not available Live Mesh for windows mobile client is only available to a limited number of users. You are currently not allowed to add your mobile phone to Live Mesh When using 3G: 'Getting Mobile Phone Identifier' error I WANT to try this please sort it out.

  • Anonymous
    November 03, 2008
    Thanks for the Promo Code! I started using Live Mesh before but did not have the option to use the Mobile version because I'm outside the US, but I used the Promo Code posted above and now my phone was added to devices successfully!

  • Anonymous
    November 05, 2008
    Have the Live Team stopped accepting new users for Live Mesh Mobile currently? I have installed the client but from the client I get a message about not accepting users. From the Windows machine I get an Unknown Error 76d90946-ad1a. I'd really like to start sync'ing my Mesh clients with my Windows Mobile device.

  • Anonymous
    November 05, 2008
    Mobile Mesh syncs and download files to my phone's main memory. It doesn't download files to the storage card. Can't wait to be able to install Mobile Mesh in the storage card and be able to sync to it.

  • Anonymous
    November 05, 2008
    Ok, absolutely none of this is working for me. #1 the program for my WinMobile PDA gives me this: "Live Mesh for Windows Mobile client is only available to  limited number of users. You are currently not allowed to add your mobile phone to Live Mesh" #2 the US link above you give us to click on, gives me this: Unknown Error. (Code: b6d783f1-86e7, 11/5/2008 6:33 PM) #3 signing into Live Mesh on my desktop browser gives me no option for adding a mobile device! And a little tip, try to remember that WinMobile runs on more than phones.

  • Anonymous
    November 07, 2008
    Are there plans to make a version for the iPhone?

  • Anonymous
    November 07, 2008
    Thank you! this is a Wonderful application/Service. The only thing I could think to add to this to make it even better would be a way to "Share" Mesh Desktop/Folders with another Live ID .... ie I have my Laptop / Desktop / Mobile Phone now sync'ing but want to add the Wifes Desktop and Phone to the "Circle" so that we could share files. Specifically our "Camera Folders" on our phones. So when I take a picture on my phone it sync's with all devices and should have the pictures on the wifes phone.

  • Anonymous
    November 07, 2008
    Thanks for the release... works great on my Sprint Mogul... but I hope the next release is a little better tuned for VGA resolution like the Sprint Touch Pro.

  • Anonymous
    November 07, 2008
    When will will it be opened up for more devices? I've tried on two different smartphones, neither one would connect. All I get is the "Live Mesh for Windows Mobile client is only available to  limited number of users. You are currently not allowed to add your mobile phone to Live Mesh"

  • Anonymous
    November 10, 2008
    The comment has been removed

  • Anonymous
    November 10, 2008
    The comment has been removed

  • Anonymous
    November 11, 2008
    It would be nice if you maintain a waiting list for interested people as it avoids visiting this page hundred times a day.

  • Anonymous
    November 13, 2008
    The comment has been removed

  • Anonymous
    November 13, 2008
    Live mesh is one of the greatest thinks of Microsoft. Thanks to all the team who makes it possible!

  • Anonymous
    November 13, 2008
    How will I become one of the limited number of users who are allowed to add our mobile phones?

  • Anonymous
    November 14, 2008
    Hi There, When will you be adding more spaces to this trial ? Thks J

  • Anonymous
    November 16, 2008
    Using Live Mesh in Australia, I can no longer log in to Mesh.com, still use the thingy in the system tray.

  • Anonymous
    November 23, 2008
    I have waited years for this service. It is superb. Can someone point me into the direction of how to install an installation on my Nokia N95 that will work with WAP? Many Thanks