Freigeben über

Console based Agent Deployment Troubleshooting table

  • Artikel

<!--[if lt IE 9]>

<![endif]-->

Comments

  • Anonymous
    January 01, 2003
    Thanks to Kevin Holman: Console based Agent Deployment Troubleshooting table and Which hotfixes should

  • Anonymous
    January 01, 2003
    Are you saying that "domainSCOMsvcacct" is a DOMAIN ADMIN on the domain controller for the WAN site?

  • Anonymous
    January 01, 2003
    Thats odd.... because I have a $ sign in my password - and it works just fine.  

  • Anonymous
    January 01, 2003
    Hi Kevin, I think this code is not in the list above ... The error code is 10060L(A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.).   Please verify there is network connectivity, the server is running and has registered it's listening port, and there are no firewalls blocking traffic to the destination. Thanks, Dom

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    January 01, 2003
    Your table shows c000296E error with a service name but as I push/repair to the SP1 agent for R2 upgrade, I get: The Operations Manager Server detected that the following services on computer "(null)" are not running. These services are required for push agent installation. To complete this operation, either start the required services on the computer or install the Operations Manager agent manually by using MOMAgent.msi located on the product CD. Operation: Agent Install Remote Computer Name: <server.domain.com> Install account: <Agent Action Account> Error Code: C000296E Error Description: Unknown error 0xC000296 Any thoughts on what service to check?

  • Anonymous
    January 01, 2003
    The comment has been removed

  • Anonymous
    June 11, 2009
    I received "The network path was not found. Result code: 80070035" when attempting to modify/create a custom data provider / NT performance counter by browsing a remote computer.  Turns out, you need remote registry service on, at least to add it and see the detatils of the parameter on the remote server.

  • Anonymous
    August 05, 2009
    For the first one, I found running wbemtest that processor_architecture was completely missing from the win32_environment class. By doing this: creat a new REG_SZ value PROCESSOR_ARCHITECTURE under HKCUEnvironment identical with the one under HKLMSYSTEMCurrentControlSetControlSession ManagerEnvironment. I found it was created! Then the remote installs worked.

  • Anonymous
    September 14, 2009
    The comment has been removed

  • Anonymous
    February 18, 2010
    i am gettin and error stating 80070040. the Specified network name is no longer available. based on the resolutions above will verifying that the agent push account has local admin rights fix this problem as well?

  • Anonymous
    May 26, 2010
    I am getting a C000296E error on my R2 agent push, but it does not show what is not running like your examples.  It just says,"The Operations Manager Server detected that the following services on computer "(null)" are not running" Any Ideas?

  • Anonymous
    July 28, 2010
    The comment has been removed

  • Anonymous
    August 25, 2010
    Thank you for the information provided, But sadly my incident matched none of above: I'm trying to push to windows 2008 x64 which is domain controller for WAN site, which fails with below error: The Operations Manager Server failed to open service control manager on computer computername.domain. Therefore, the Server cannot complete configuration of agent on the computer. Operation: Agent Install Install account: domainSCOMsvcacct Error Code: 80070005 Error Description: (null)

I tried manual install also, but System Center OM service does not start. there are many more Windows 2008 servers that agent install not successful. Windows 2008 OS reinstalled recently so cannot be issues with OS, firewall disabled and there are other servers in the same subnet/site so cannot be firewall issue. User domain admin acct for all operations, so cannot be permissions issue. Appreciate your advice in this matter. Thanks.

  • Anonymous
    November 16, 2010
    I am facing an issue that while installing scom agent from console. it is not discovered if i point any member server for installation, however if i point RMS then it getting discovered successfully.

  • Anonymous
    November 16, 2010
    I am facing an issue that while installing scom agent from console. it is not discovered if i point any member server for installation, however if i point RMS then it getting discovered successfully. Can you help on this.

  • Anonymous
    December 02, 2010
    I was facing an issue and this blog helped. thanks.

  • Anonymous
    January 04, 2011
    The Operations Manager Server could not start the MONAgentInstaller service on computer This service is user to perform configuration operations on the computer before the system center operations mangaer agent can be configured. Opertation: Agent Install Install Account: Domainaccount Error code:- 80070102 Error Description: (null)

  • Anonymous
    September 15, 2011
    Hello Kevin, I have this error on machine wehere the agent was installed before and as it went grayed out it has been uninstalled after other tries. Now trying to reinstall the agent is giving the following error: The Operations Manager Server failed to open service control manager on computer Server name Therefore, the Server cannot complete configuration of agent on the computer. Operation: Agent Install Install account: ADSVCMOMAction Error Code: 80070005 Error Description: (null) The account svcMOMAction is a local Administrators The account used to push is in the Administrators Group on the local machine. It is not domain controller These machines were having the agent before but got grayed out since... There is no firewall Any idea? Thanks, Dom

  • Anonymous
    September 30, 2011
    I'm seeing error two from above for all agents push-out attempts from all scom management servers. can no longer roll out agents. question is how do you perform remedy 3 from the list? "3.  Inspect WMI service, health, and rebuild repository if necessary" I've ruled out all remedy's 1,2,4 and 5 as the cause. inspect wmi service where? health? health of what? where? rebuild what repository? how? thanks

  • Anonymous
    October 07, 2011
    Kevin, Have you seen error: 80070654? If yes to you know any resolution? Thanks!

  • Anonymous
    November 02, 2011
    Hello Kevin, I am getting a code which is not listed: 800706BE any idea? Thanks, Dominique

  • Anonymous
    May 07, 2012
    Saved my bacon again!! Thx Kevin.

  • Anonymous
    June 22, 2012
    Hello, The MOM Server failed to perform specified operation on computer servername.domain.com 80070040 1.  Ensure agent push account has local admin rights The Installed By is correct but the Action Account is wrong, how to corect it? Thanks, DOm

  • Anonymous
    September 19, 2012
    please add 'Error Code 80070641', 'Remediation Steps' = 'turn User Access Control off'

  • Anonymous
    November 14, 2012
    I saw some info on error code 800706BA but im not sure what to do with it??  I got it when i was installing MS updates.  Ive also been getting a blue screen with STOP:0x0000007E so not sure if these two are somehow tied together. Any recommendations would be great?

  • Anonymous
    June 08, 2013
    The comment has been removed

  • Anonymous
    August 28, 2013
    Wiil is right, I have the same error issue 80070643, $ in my password, and I confirm it works with an other account with no $ in password !!!!!! Juste save my day :) Thank Will !! Precision, two account have the exact same rigtht, domain adminiwstrator ;) Remove your dollars..

  • Anonymous
    November 07, 2013
    Thanks awesome   ! ! !  -> 80070102 Sometimes – the Windows Firewall service – even if disabled – will have a stuck rule.  Run:  (netsh advfirewall firewall delete rule name=”MOM Agent Installer Service”)

    • Anonymous
      June 06, 2017
      Lifesaver!

  • Anonymous
    August 25, 2014
    The comment has been removed

  • Anonymous
    December 04, 2014
    I received error 80070643 during my SCOM 2012 R2 agent rollout. I ran lodctr /R to rebuild the perfmon counter library, and it works just fine now.

  • Anonymous
    February 17, 2016
    I was getting the Access Denied error, tried everything to resolve it. Turns out the SCOM server required access to the internet to push the agent to another server on the same subnet and same domain. Blocking Access at the network gateway firewall caused the Access denied, enabling it again and the agent was installed with no issues.

  • Anonymous
    August 02, 2017
    Addition for 80070005:If install account is a member of Protected Users AD Group installation failed with error.I think problem caused by CredSSP that disabled for accounts in this group

  • Anonymous
    February 18, 2018
    The comment has been removed

    • Anonymous
      February 18, 2018
      Your best friend is the agent's OpsMgr event log.If it is unloading system rules and going grey - this is usually bad management packs, or a supported configuration mismatch.What version of SCOM? What SCOM version of agent? What OS version are the troublemakers? Is SCOM and agent patched to a recent UR? Is you SCOM environment connected to OMS and downloading the intelligence packs? There is a known issue of OMS causing some issues on older agent OS versions.