Freigeben über

Diagnosing SideBySide failures

  • Artikel

PhilW believes that SxS COM with manifest is one of those “well kept secrets” that should be more well known. As the current maintainer of Windows SxS, I am absolutely thrilled to hear that.

That said, I have to admit that it is not the easiest thing in the world when something went wrong in Sxs. Typically you are left in a situation with no hint of what went wrong, and how to fix the problem.

In Vista some work is done to make Sxs failures easily diagnosable.

This article compares the experience of diagnosing Sxs failure in Windows XP and Windows Vista.

In VS 2005 VC80 CRT is fusionized (when a component is made into a Sxs assembly, we call it fusionized). When an application is compiled with VC 2005, VC will automatically create a manifest for it, and set it to depend on VC80 CRT. In order for the application to run, you have to install VC80 CRT in the machine first.

A common mistake is to xcopy the application to a different machine without installing the VC80 CRT redist in that machine.

A different common mistake is to compile the application in debug mode, and try to use the application in a machine with only retail VC80 CRT redist installed. Application compiled in debug mode will depend on the debug version of VC80 CRT, and there is no redist for it.

In both cases, the application will not launch due to Sxs failure (not able to find VC80 CRT.). We will use the second case as the example in our discussion.

So we have a test application.


(Click to enlarge)

The test application is compiled in debug mode, thus it depends on debug version of VC80 CRT.


(Click to enlarge)

Let’s try it on Windows XP.

Run it in cmd.exe.


(Click to enlarge)

(Text: The system cannot execute the specified program.)

Ok, the system cannot execute the specified program. That is not helpful.

Let’s try again with explorer.


(Click to enlarge)

(Text: This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.)

Hmm, a little better, but still not helpful. Application configuration is incorrect. What application configuration? Reinstall the application may fix the problem, how?

Actually, the message we see in the explorer error dialog is the standard error message for Win32 error SXS_CANT_GEN_ACTCTX. Cmd.exe does not understand this error, so it shows a generic error message.

Whenever there is a Sxs failure, Sxs always logs information to system event log with source SideBySide. In our case, Sxs logs three messages to system event log.


(Click to enlarge)

In other cases, Sxs may log more (or less) messages. The oldest message usually contains the more direct information on what exactly is the failure. Other messages typically just repeat the same information, or more generalized information. You should always read the oldest message relevant to the failure to find the cause of the Sxs failure.

In our case, the three messages are identical


(Click to enlarge)

It tells us that Sxs cannot generate activation context for test.exe.manifest, and the reason is that some referenced assembly is not installed. In our case, since we only have one dependency, so we know VC80 Debug CRT is not installed. In the case when we have multiple dependencies, we still don’t know which dependency is missing.

OK. Enough about Windows XP. Let’s try it on the latest and greatest Windows Vista.

First, run it in cmd.exe.


(Click to enlarge)

(Text: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.)

Much better. It tells us that there is a Sxs problem, and directs us to the application event log for more information.

(note, in Windows Vista, due to a security change, Sxs can no longer write to the system event log. So the information is written to the application event log.)

Let’s open the event viewer.


(Click to enlarge)

Here it is. There is one message with source SideBySide. And it tells us what exactly the problem is: Dependent assembly VC80 debug CRT cannot be found. Even better, it tells us to use sxstrace.exe for detailed diagnosis.

(I created a custom view to only show SideBySide messages in event viewer. You should look for messages from source SideBySide under Windows Logs\Application.)

So what is the sxstrace.exe thing?

Recall that in .Net framework, fusion binding log is the ultimate diagnosis tool for assembly binding failure. Sxstrace is basically the same idea. We want to show exactly how Sxs is searching for the dependencies so you can figure out how to fix the problem.

Fusion binding log is using a custom log format --- HTML and the file is stored in internet explorer cache by default. Sxstrace uses the ETW model.  

ETW model has three components: Controller, Providers, and Consumers. In our case, sxstrace.exe is both the controller and the consumer, and Sxs is the provider.

Sxstrace.exe is shipped in Windows Vista and resides in %windir%\system32.

Here is the usage for sxstrace.exe:


(Click to enlarge)

To see the Sxs tracing, we have to enable the trace first.


(Click to enlarge)

(Enable tracing requires admin privilege. You have to run sxstrace.exe in an elevated cmd.exe window.)

Now let’s run the test application, and stop the tracing.

The trace generated is a binary file. We have to translate it to human readable text.


(Click to enlarge)

And here is the output:


(Click to enlarge)

You can see exactly how Sxs probes for the dependent assembly VC80 debug CRT.

This concludes the article. I hope you find the Windows Vista experience helpful to diagnose Sxs failures.

Comments

  • Anonymous
    April 16, 2006
    I am really really glad to see these improvements.  Only one necessary improvement is still missing.

    > Application compiled in debug mode will
    > depend on the debug version of VC80 CRT,
    > and there is no redist for it.

    Why doesn't this ever change?

    Suppose Microsoft made cars.  It would be legal to use seat belts on a test track in cars driven by test pilots, but it would be illegal to supply or use seat belts in cars by end users.

  • Anonymous
    April 16, 2006
    Norman,

    I don't own VC80 CRTs. You have to talk to VC team.

  • Anonymous
    May 24, 2006
    This does not work with me. I can generate the etl file but fail to generate the parsed txt from it. The tools crashes on me. with some funny message saying it needs to send some information to Microsoft. I am like ok great send it but how will I get the solution?????

    Anyway it was frustrating to go through this ordeal. If you can get me some reply please do send them to Atul_Kulkarni@Symantec.com

  • Anonymous
    June 01, 2006
    Hi Folks. I know absolutely nothing about .NET and/or VC, but my Windows XP Pro machine is becoming non-responsive three or four times a day and each time the event log has the same nine SxS errors listed with Event IDs 32 and 59, referring to VC80.MFCLOC assembly not being found. Apparently some application I installed has caused this, but I cannot determine which or why.  Clueless, I have been searching for references to try to diagnose just what is going wrong, and how to repair it. This is the first real references I have found. Can anyone here point me toward any resources to help get my PC back working? Your assistance is greatly appreciated! Thanks, Jim McGowan - jcmcgowan@gmail.com

  • Anonymous
    July 12, 2006
    Atul,

    There are known bugs in sxstrace.exe. If you can try the latest Vista build when it comes out that will be great.

  • Anonymous
    August 28, 2006
    Junfeng has an interesting walkthrough on how diagnose SxS failures and brief introduction of new tool available on Vista. One may find it here, http://blogs.msdn.com/junfeng/archive/2006/04/14/576314.aspx.

  • Anonymous
    March 06, 2007
    PingBack from http://www.cchsu.com/art-en/2007/03/07/56/

  • Anonymous
    March 06, 2007
    PingBack from http://www.cchsu.com/arthur/2007/03/07/127/

  • Anonymous
    April 30, 2007
    Now almost everyone knows at least what Vista's UAC is. But not many people know what Windows Side by

  • Anonymous
    December 29, 2007
    PingBack from http://cars.oneadayvitamin.info/?p=454

  • Anonymous
    May 04, 2008
    PingBack from http://jameson.newsmediacompany.com/sidebysidecom.html

  • Anonymous
    May 25, 2008
    PingBack from http://reginald.newsworlddigest.info/sidebysidecom.html

  • Anonymous
    July 05, 2008
    PingBack from http://crystal.meinvoll.com/sidebyside.html

  • Anonymous
    July 27, 2008
    Recently I was working with one of my customers, who were trying to register a binary which was developed

  • Anonymous
    August 05, 2008
    What if you had written an native ATL ActiveX control and just can not let it show on your IE7 browser?

  • Anonymous
    August 05, 2008
    crosspost from http://blogs.msdn.com/rextang What if you had written an native ATL ActiveX control and

  • Anonymous
    August 07, 2008
    Let’s go back to the older days, when code sharing was an integral decision taken by application developers.

  • Anonymous
    August 17, 2008
    The comment has been removed

  • Anonymous
    August 27, 2008
    Just before the weekend, I was trying to run an application on a 64-bit installation of Windows Server

  • Anonymous
    October 24, 2008
    PingBack from http://www.lapthorn.net/archives/28

  • Anonymous
    January 18, 2009
    PingBack from http://www.keyongtech.com/2397600-vs2008-sp1-problems